The OPTITEMP TCA-P40 is a plug-in thermocouple (TC) assembly with a tapered multipart thermowell (based on form 3) in accordance with NAMUR. The temperature assembly can be mounted to a pipe or tank by a gas-tight compression fitting. It is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities.

The Thermocouple assembly is designed for process temperatures up to +600°C / +1100°F. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The TC is available with ATEX and IECEx approvals.

The OPTITEMP TCA-P20 is a plug-in thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases where a fast response time is required. The OPTITEMP TCA-P20 is designed for process temperatures of up to +600°C / +1100°F. The TC can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P20 is available with ATEX and IECEx approvals.

The OPTITEMP TCA-P14 is a plug-in thermocouple (TC) assembly without thermowell. The industrial temperature assembly for standard applications can be mounted to process pipes and tanks or an existing thermowell by a compression fitting. It is suitable for temperature measurement of liquids and gases at low pressures and low flow velocities. The sensor is designed for process temperatures up to +1100°C / +1832°F (without thermowell).

The OPTITEMP TCA-P14 features a mineral insulated (MI) cable that is particularly suitable for applications where the temperature of the environment exceeds the maximum allowable temperature of standard cable material. The MI cable can be easily formed to fit into limited spaces. The TC is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P14 is available with ATEX and IECEx approvals.

The OPTITEMP TCA-P10 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.

The OPTITEMP TCA-P10 can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The thermocouple assembly is available with ATEX and IECEx approvals.

The OPTITEMP TCA-F42 is a flanged thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3F) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F. The thermocouple is available with ATEX and IECEx approvals.

The OPTITEMP TCA-F23 is a flanged thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2F). The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases where a fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The TC is designed to operate up to +600°C / 1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.

The OPTITEMP TCA-F13 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2F) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases, in pipes and tanks at low to medium pressures and flow velocities. It is designed to operate up to +600°C / +1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The OPTITEMP TCA-F13 is available with ATEX and IECEx approvals.

The OPTITEMP TRA-TW59 is a weld-in RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F

The OPTITEMP TRA-TW59 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-TW58 is a weld-in RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F

The OPTITEMP TRA-TW58 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-TS54 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at high pressures and flow velocities (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F.

The OPTITEMP TRA-TS54 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-TS53 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F.

The OPTITEMP TRA-TS53 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-TF31 is a flanged RTD sensor assembly with a tapered barstock thermowell (DIN form 4F). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.

The OPTITEMP TRA-TF31 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-T30 is a weld-in RTD sensor assembly with a tapered barstock thermowell (based on form 4). The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient (e.g. in steam distribution systems). Its barstock thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.

The OPTITEMP TRA-T30 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-S50 is a threaded RTD sensor assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. The RTD is suitable for temperature measurement of liquids, gases and steam up to +600°C / +1100°F. However, it cannot be operated without thermowell.

The OPTITEMP TRA-S50 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-S41 is a threaded RTD sensor assembly with a tapered welded multipart thermowell (based on form 3G) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F. The resistance temperature device is available with ATEX and IECEx approvals.

The OPTITEMP TRA-S34 is a threaded RTD sensor assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. The RTD is suitable for temperature measurement of liquids, gases and steam up to +600°C / +1100°F. However, it cannot be operated without thermowell.

The OPTITEMP TRA-S34 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.

The OPTITEMP TRA-S22 is a threaded RTD sensor assembly with a reduced welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The OPTITEMP TRA-S22 is designed to operate up to +600°C / +1100°F.

The OPTITEMP TRA-S21 is a threaded RTD sensor assembly with a reduced welded multipart thermowell (based on form 8). The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The OPTITEMP TRA-S21 is predominantly used in applications with lower process temperatures up to +150°C / +302°F.

The OPTITEMP TRA-S12 is a threaded RTD sensor assembly with a straight welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications can be screwed directly to the process pipe or tank. It is suitable for temperature measurement of gases and liquids up to +600°C / +1100°F. The RTD can be used at low to medium pressures and flow velocities. The OPTITEMP TRA-S12 is available with ATEX and IECEx approvals.

The OPTITEMP TRA-S11 is a threaded RTD sensor assembly with a straight welded multipart thermowell (based on form 8). The industrial temperature assembly for standard applications can be screwed directly to the process pipe or tank. The RTD is predominantly used in applications with lower process temperatures up to +150°C / +302°F. It is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities. The OPTITEMP TRA-S11 is available with ATEX and IECEx approvals.

The OPTITEMP-TRA-P40 is a plug-in RTD sensor assembly with a tapered welded multipart thermowell (DIN form 3) in accordance with NAMUR. The temperature assembly can be mounted to a pipe or tank by a gas-tight compression fitting. It is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities.

The resistance temperature device is designed for process temperatures up to +600°C / +1100°F. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The RTD is available with ATEX and IECEx approvals.

The OPTITEMP TRA-P20 is a plug-in RTD sensor assembly with a reduced welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases where a fast response time is required. It is designed for process temperatures up to +600°C / +1100°F.

The OPTITEMP TRA-P20 can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The RTD assembly is available with ATEX and IECEx approvals.

The OPTITEMP TRA-P14 is a plug-in RTD sensor assembly without thermowell. The industrial temperature assembly for standard applications can be mounted to a process pipe and tank or an existing thermowell by a compression fitting. It is suitable for temperature measurement of liquids and gases at low pressures and low flow velocities. The resistance temperature device is designed for process temperatures up to +600°C / +1100°F.

The OPTITEMP TRA-P14 features a mineral insulated (MI) cable that is particularly suitable for applications where the temperature of the environment exceeds the maximum allowable temperature of standard cable material. The MI cable can be easily formed to fit into limited spaces. The RTD is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TRA-P14 is available with ATEX and IECEx approvals.

The OPTITEMP TRA-P10 is a plug-in RTD sensor assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.

The OPTITEMP TRA-P10 can be used in pipes and tanks, at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The RTD is available with ATEX and IECEx approvals.