- F
- L
- E
- X
Raman Rxn5 analyzer
-
Measuring principle
Raman spectroscopy
-
Spectral coverage
150-3425 cm-1 (532 nm)
-
Spectral resolution
5 cm-1 (532 nm)
-
Channels
Up to four channels
-
Temperature
Operating:
-20 to 50 °C / -4 to 122 °F
Recommended storage:
-30 to 60 °C / -22 to 140 °F -
Relative humidity
0 to 90 %, non-condensing
-
Input voltage
90-264 VAC, 47-63 Hz standard
-
Power consumption (W)
<300 (max)
<300 (typical start-up)
<200 (typical running) -
Warm up time (minutes)
120
-
Unit dimensions (width x height x depth)
457 x 834 x 254 mm
18.00 x 32.84 x 10.00 inch -
Weight
61.2 kg / 135 lbs
-
Sampling probe compatibility
Raman Rxn-30
-
Automation interface
Modbus (TCP/IP or RS485)
-
Installation options
IP 56 wall-mounted, sealed/purged enclosure
-
Hazardous area certifications
ATEX, CSA, IECEx
Field of application
The Raman Rxn5 process analyzer is an industry-leading, turn-key, laser-based analyzer powered by Kaiser Raman technology. It provides quantitative chemical composition measurements using Raman spectroscopy. The design of the Raman Rxn5 incorporates customer requirements for serviceability and hazard-area certification, provides a compact footprint, and minimizes utilities consumption. The high optical efficiency of the analyzer makes it ideal for typical gas-phase sample measurements.
Process measurement points:Steam methane reformersGasifiers (coal, petcoke, waste, biomass)Shift convertersHydrotreatersHydrocrackersCO2 removalFinished product synthesis loopsTypical industries:Hydrogen production/purity, HyCO, Hydrogen recycle, Methanol productionAmmonia productionGas turbine fuel feedSynthetic natural gal/IGCC power plantsLNG baseload customer transfer, LNG rundown to storage tanks, LNG mixed refrigerant optimization
Benefits
Non-destructive analysis of gases, including homonuclear diatomics (H2, N2, O2)Compact, smaller than most wall-mount gas chromatographs (GCs)Can replace up to four traditional analyzers with a single base unit and four probesRugged with minimal utility requirements, no sample transport, and no consumables (columns, valves, gases, pumps)Minimal analyzer technician time with maximum technician safety (no toxic gases are transported to the analyzer)Measures four streams simultaneously for faster multi-channel results-20 to +50 °C operating environment