OPTITEMP TCA-S21
The OPTITEMP TCA-S21 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 8). The industrial […]
The OPTITEMP TCA-S21 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 8). The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. The TC sensor can be used in pipes and tanks at low to medium pressures and flow velocities. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F.
Overview
The OPTITEMP TCA-S21 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 8). The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. The TC sensor can be used in pipes and tanks at low to medium pressures and flow velocities. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-S12
The OPTITEMP TCA-S12 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2G) and neck
The OPTITEMP TCA-S12 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications can be screwed directly to the process pipe or tank. It is suitable for temperature measurement of gases and liquids up to +600°C / +1100°F. The TC sensor can be used at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S12 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications can be screwed directly to the process pipe or tank. It is suitable for temperature measurement of gases and liquids up to +600°C / +1100°F. The TC sensor can be used at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-S11
The OPTITEMP TCA-S11 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 8). The industrial
The OPTITEMP TCA-S11 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 8). The industrial temperature assembly can be screwed directly to the process pipe or tank. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F. The TC sensor is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S11 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 8). The industrial temperature assembly can be screwed directly to the process pipe or tank. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F. The TC sensor is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-P65
The OPTITEMP TCA-P65 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a double gas-tight aluminium oxide
The OPTITEMP TCA-P65 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a double gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to 1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P65 can be mounted to pipes, stacks and ducts by a sliding flange.
Overview
The OPTITEMP TCA-P65 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a double gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to 1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P65 can be mounted to pipes, stacks and ducts by a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: Ceramic C799
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P64
The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic
The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P64 can be mounted to pipes, stacks or ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P64 can be mounted to pipes, stacks or ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: Ceramic C610 or C799
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P63
The OPTITEMP TCA-P63 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic
The OPTITEMP TCA-P63 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or other exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P63 can be mounted to pipes, stacks, ducts with a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P63 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or other exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P63 can be mounted to pipes, stacks, ducts with a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: Ceramic C610 and C799
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P62
The OPTITEMP TCA-P62 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4762 / AISI 446
The OPTITEMP TCA-P62 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4762 / AISI 446 or 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P62 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P62 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4762 / AISI 446 or 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P62 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: 1.4762 / AISI 446 or 1.4767 / Kanthal AF
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P61
The OPTITEMP TCA-P61 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4835 / Alloy 253MA.
The OPTITEMP TCA-P61 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4835 / Alloy 253MA. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P61 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P61 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4835 / Alloy 253MA. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P61 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: 1.4835 / 253 MA
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P60
The OPTITEMP TCA-P60 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 1) made of
The OPTITEMP TCA-P60 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 1) made of 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P60 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P60 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 1) made of 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P60 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: 1.4767 / Kanthal AF
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P40
The OPTITEMP TCA-P40 is a plug-in thermocouple (TC) assembly with a tapered multipart thermowell (based on form 3) in accordance with
The OPTITEMP TCA-P40 is a plug-in thermocouple (TC) assembly with a tapered multipart thermowell (based on form 3) in accordance with NAMUR. The temperature assembly can be mounted to a pipe or tank by a gas-tight compression fitting. It is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities.
The Thermocouple assembly is designed for process temperatures up to +600°C / +1100°F. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The TC is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-P40 is a plug-in thermocouple (TC) assembly with a tapered multipart thermowell (based on form 3) in accordance with NAMUR. The temperature assembly can be mounted to a pipe or tank by a gas-tight compression fitting. It is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities.
The Thermocouple assembly is designed for process temperatures up to +600°C / +1100°F. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The TC is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Industrial temperature measurement of liquids and gases
- Thermowell material: 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-P20
The OPTITEMP TCA-P20 is a plug-in thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2). The industrial
The OPTITEMP TCA-P20 is a plug-in thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases where a fast response time is required. The OPTITEMP TCA-P20 is designed for process temperatures of up to +600°C / +1100°F. The TC can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P20 is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-P20 is a plug-in thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases where a fast response time is required. The OPTITEMP TCA-P20 is designed for process temperatures of up to +600°C / +1100°F. The TC can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P20 is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P14
The OPTITEMP TCA-P14 is a plug-in thermocouple (TC) assembly without thermowell. The industrial temperature assembly for standard applications can be mounted
The OPTITEMP TCA-P14 is a plug-in thermocouple (TC) assembly without thermowell. The industrial temperature assembly for standard applications can be mounted to process pipes and tanks or an existing thermowell by a compression fitting. It is suitable for temperature measurement of liquids and gases at low pressures and low flow velocities. The sensor is designed for process temperatures up to +1100°C / +1832°F (without thermowell).
The OPTITEMP TCA-P14 features a mineral insulated (MI) cable that is particularly suitable for applications where the temperature of the environment exceeds the maximum allowable temperature of standard cable material. The MI cable can be easily formed to fit into limited spaces. The TC is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P14 is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-P14 is a plug-in thermocouple (TC) assembly without thermowell. The industrial temperature assembly for standard applications can be mounted to process pipes and tanks or an existing thermowell by a compression fitting. It is suitable for temperature measurement of liquids and gases at low pressures and low flow velocities. The sensor is designed for process temperatures up to +1100°C / +1832°F (without thermowell).
The OPTITEMP TCA-P14 features a mineral insulated (MI) cable that is particularly suitable for applications where the temperature of the environment exceeds the maximum allowable temperature of standard cable material. The MI cable can be easily formed to fit into limited spaces. The TC is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The OPTITEMP TCA-P14 is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Without thermowell, sheath material: 2.4816 / Alloy 600
- Flexible and hand formable MI cable sensor
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-P10
The OPTITEMP TCA-P10 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2). The industrial
The OPTITEMP TCA-P10 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-P10 can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The thermocouple assembly is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-P10 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2). The industrial temperature assembly is suitable for temperature measurement of liquids and gases. It is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-P10 can be used in pipes and tanks at low to medium pressures and flow velocities. It is very flexible to use since the decision as to the required insertion depth is only necessary immediately prior to installation. The thermocouple assembly is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-F42
The OPTITEMP TCA-F42 is a flanged thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3F) in accordance
The OPTITEMP TCA-F42 is a flanged thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3F) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F. The thermocouple is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-F42 is a flanged thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3F) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F. The thermocouple is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Industrial temperature measurement of solids, liquids, gases and steam
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-F23
The OPTITEMP TCA-F23 is a flanged thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2F). The industrial
The OPTITEMP TCA-F23 is a flanged thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2F). The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases where a fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The TC is designed to operate up to +600°C / 1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
Overview
The OPTITEMP TCA-F23 is a flanged thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2F). The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases where a fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The TC is designed to operate up to +600°C / 1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths available
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-F13
The OPTITEMP TCA-F13 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2F) and neck
The OPTITEMP TCA-F13 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2F) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases, in pipes and tanks at low to medium pressures and flow velocities. It is designed to operate up to +600°C / +1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The OPTITEMP TCA-F13 is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-F13 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2F) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of solids, liquids and gases, in pipes and tanks at low to medium pressures and flow velocities. It is designed to operate up to +600°C / +1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The OPTITEMP TCA-F13 is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Chemically resistant PTFE or similar coating for all wetted parts available
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TRA-TW59
The OPTITEMP TRA-TW59 is a weld-in RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TW59 is a weld-in RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F
The OPTITEMP TRA-TW59 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TW59 is a weld-in RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F
The OPTITEMP TRA-TW59 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404/316L or 1.4571/316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TW58
The OPTITEMP TRA-TW58 is a weld-in RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TW58 is a weld-in RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F
The OPTITEMP TRA-TW58 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TW58 is a weld-in RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F
The OPTITEMP TRA-TW58 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TS54
The OPTITEMP TRA-TS54 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TS54 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at high pressures and flow velocities (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F.
The OPTITEMP TRA-TS54 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS54 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at high pressures and flow velocities (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F.
The OPTITEMP TRA-TS54 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TS53
The OPTITEMP TRA-TS53 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TS53 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F.
The OPTITEMP TRA-TS53 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS53 is a threaded RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F.
The OPTITEMP TRA-TS53 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TS52
The OPTITEMP TRA-TS52 is a threaded RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TS52 is a threaded RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for use in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS52 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS52 is a threaded RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for use in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS52 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TS37
The OPTITEMP TRA-TS37 is a threaded RTD sensor assembly with a straight barstock thermowell (DIN form 9). The temperature assembly for
The OPTITEMP TRA-TS37 is a threaded RTD sensor assembly with a straight barstock thermowell (DIN form 9). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TRA-TS37 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS37 is a threaded RTD sensor assembly with a straight barstock thermowell (DIN form 9). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TRA-TS37 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TS36
The OPTITEMP TRA-TS36 is a threaded RTD sensor assembly with a straight barstock thermowell (based on form 7). The temperature assembly
The OPTITEMP TRA-TS36 is a threaded RTD sensor assembly with a straight barstock thermowell (based on form 7). The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS36 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS36 is a threaded RTD sensor assembly with a straight barstock thermowell (based on form 7). The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS36 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TS35
The OPTITEMP TRA-TS35 is a threaded RTD sensor assembly with a straight welded multipart thermowell (based on form 8). The temperature
The OPTITEMP TRA-TS35 is a threaded RTD sensor assembly with a straight welded multipart thermowell (based on form 8). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The RTD is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TRA-TS35 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS35 is a threaded RTD sensor assembly with a straight welded multipart thermowell (based on form 8). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The RTD is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TRA-TS35 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Modular design: union nut neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TRA-TS32
The OPTITEMP TRA-TS32 is a threaded RTD sensor assembly with a straight welded multipart thermowell (DIN form 5). The temperature assembly
The OPTITEMP TRA-TS32 is a threaded RTD sensor assembly with a straight welded multipart thermowell (DIN form 5). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical applications). It is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS32 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TS32 is a threaded RTD sensor assembly with a straight welded multipart thermowell (DIN form 5). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical applications). It is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TS32 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TRA-TF57
The OPTITEMP TRA-TF57 is a RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used
The OPTITEMP TRA-TF57 is a RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks and reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TRA-TF57 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TF57 is a RTD sensor assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks and reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TRA-TF57 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TF56
The OPTITEMP TRA-TF56 is a flanged RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TF56 is a flanged RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TRA-TF56 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TF56 is a flanged RTD sensor assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F. The particular advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TRA-TF56 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L
- Chemically resistant PTFE or similar coating for all wetted parts available
- Temperature range: -40…+600°C /+1100°F
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TF55
The OPTITEMP TRA-TF55 is a flanged RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TRA-TF55 is a flanged RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TRA-TF55 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TF55 is a flanged RTD sensor assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The RTD is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TRA-TF55 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-TF33
The OPTITEMP TRA-TF33 is a flanged RTD sensor assembly with a straight welded multipart thermowell. The temperature assembly for advanced requirements
The OPTITEMP TRA-TF33 is a flanged RTD sensor assembly with a straight welded multipart thermowell. The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TF33 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TF33 is a flanged RTD sensor assembly with a straight welded multipart thermowell. The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TF33 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TRA-TF31
The OPTITEMP TRA-TF31 is a flanged RTD sensor assembly with a tapered barstock thermowell (DIN form 4F). The temperature assembly for
The OPTITEMP TRA-TF31 is a flanged RTD sensor assembly with a tapered barstock thermowell (DIN form 4F). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TF31 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-TF31 is a flanged RTD sensor assembly with a tapered barstock thermowell (DIN form 4F). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-TF31 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L, 1.4571 / 316Ti, 1.7335 / 13CrMo44, 1.0460 / C22.8
- Chemically resistant PTFE or similar coating for all wetted parts available
- Temperature range: -40…++600°C / +1100°F
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-T30
The OPTITEMP TRA-T30 is a weld-in RTD sensor assembly with a tapered barstock thermowell (based on form 4). The temperature assembly
The OPTITEMP TRA-T30 is a weld-in RTD sensor assembly with a tapered barstock thermowell (based on form 4). The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient (e.g. in steam distribution systems). Its barstock thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-T30 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-T30 is a weld-in RTD sensor assembly with a tapered barstock thermowell (based on form 4). The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient (e.g. in steam distribution systems). Its barstock thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures. The RTD is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TRA-T30 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L, 1.4571 / 316Ti, 1.7335 / 13CrMo44, 1.0460 / C22.8
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TRA-S50
The OPTITEMP TRA-S50 is a threaded RTD sensor assembly without thermowell. The temperature assembly can be mounted to existing thermowells or
The OPTITEMP TRA-S50 is a threaded RTD sensor assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. The RTD is suitable for temperature measurement of liquids, gases and steam up to +600°C / +1100°F. However, it cannot be operated without thermowell.
The OPTITEMP TRA-S50 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-S50 is a threaded RTD sensor assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. The RTD is suitable for temperature measurement of liquids, gases and steam up to +600°C / +1100°F. However, it cannot be operated without thermowell.
The OPTITEMP TRA-S50 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The resistance temperature device can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Without thermowell, sheath material: 1.4404 / 316L
- Also suitable for installation into existing thermowells
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TRA-S41
The OPTITEMP TRA-S41 is a threaded RTD sensor assembly with a tapered welded multipart thermowell (based on form 3G) in accordance
The OPTITEMP TRA-S41 is a threaded RTD sensor assembly with a tapered welded multipart thermowell (based on form 3G) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F. The resistance temperature device is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TRA-S41 is a threaded RTD sensor assembly with a tapered welded multipart thermowell (based on form 3G) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F. The resistance temperature device is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Industrial temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx