OPTITEMP TRA-V20
OPTITEMP TRA-V20 is a resistance temperature sensor (RTD) for measuring outdoor air temperature in industrial areas. The measuring range of this […]
OPTITEMP TRA-V20 is a resistance temperature sensor (RTD) for measuring outdoor air temperature in industrial areas. The measuring range of this wall-mount HVAC temperature sensor is -50…+100°C / -58…+212°F. Its Pt100 measuring element is placed in the tip of a Ø6 x 0.5 mm / 0.25 x 0.02 inch brass tube for fast response times. The sensor is protected by an aluminium junction box and meets the demands for ingress protection IP65. The OPTITEMP TRA-V20 comes with optional integrated transmitter providing an analogue output signal (4…20 mA or 0…10 V) for the selected measuring range.
Overview
OPTITEMP TRA-V20 is a resistance temperature sensor (RTD) for measuring outdoor air temperature in industrial areas. The measuring range of this wall-mount HVAC temperature sensor is -50…+100°C / -58…+212°F. Its Pt100 measuring element is placed in the tip of a Ø6 x 0.5 mm / 0.25 x 0.02 inch brass tube for fast response times. The sensor is protected by an aluminium junction box and meets the demands for ingress protection IP65. The OPTITEMP TRA-V20 comes with optional integrated transmitter providing an analogue output signal (4…20 mA or 0…10 V) for the selected measuring range.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Outdoor air temperature measurement
- Aluminium junction box with optional integrated transmitter
- Optional analogue output: current (4…20 mA) or voltage (0…10V)
OPTITEMP TRA-V10
The OPTITEMP TRA-V10 is a resistance temperature sensor (RTD) for measuring indoor air temperature. The HVAC temperature sensor is typically used
The OPTITEMP TRA-V10 is a resistance temperature sensor (RTD) for measuring indoor air temperature. The HVAC temperature sensor is typically used in data centres, hospitals or offices. The measuring range of this wall-mount RTD is 0…+50°C / +32…+122°F. The Pt100 measuring element is placed in a junction box (71 x 71 x 26 mm / 2.8 x 2.8 x 1.02 inch). It comes with optional integrated transmitter providing current output (4…20 mA or 0…10 V) for the selected measuring range.
Overview
The OPTITEMP TRA-V10 is a resistance temperature sensor (RTD) for measuring indoor air temperature. The HVAC temperature sensor is typically used in data centres, hospitals or offices. The measuring range of this wall-mount RTD is 0…+50°C / +32…+122°F. The Pt100 measuring element is placed in a junction box (71 x 71 x 26 mm / 2.8 x 2.8 x 1.02 inch). It comes with optional integrated transmitter providing current output (4…20 mA or 0…10 V) for the selected measuring range.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Indoor air / room temperature measurement
- Junction box with integrated transmitter
- Analogue output: current (4…20 mA) or voltage (0…10V)
OPTITEMP TRA-C30
The OPTITEMP TRA-C30 is a compact resistance sensor (RTD) with optional integrated transmitter and M12 connector. The compact sensor is particularly
The OPTITEMP TRA-C30 is a compact resistance sensor (RTD) with optional integrated transmitter and M12 connector. The compact sensor is particularly designed for general-purpose applications of OEM manufacturers, machine builders or in plant engineering where restricted installation space is an issue. The OPTITEMP TRA-C30 is a highly accurate sensor featuring great reliability over the long term, and excellent measuring stability. The compact sensor is suitable for measuring the temperature of liquids, gases and vapour from -50…+150°C / -58…+302°F.
Overview
The OPTITEMP TRA-C30 is a compact resistance sensor (RTD) with optional integrated transmitter and M12 connector. The compact sensor is particularly designed for general-purpose applications of OEM manufacturers, machine builders or in plant engineering where restricted installation space is an issue. The OPTITEMP TRA-C30 is a highly accurate sensor featuring great reliability over the long term, and excellent measuring stability. The compact sensor is suitable for measuring the temperature of liquids, gases and vapour from -50…+150°C / -58…+302°F.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases in confined space
- Vibration and shock resistant design
- With M12 connector
- Sheath: Stainless steel (1.4404 / 316L)
- Long-term stability: Uncertainty of ±0.1% of span per year
- With optional built-in transmitter (4…20 mA)
OPTITEMP TRA-C20
The OPTITEMP TRA-C20 is a compact resistance sensor (RTD) with optional integrated transmitter and valve connector (EN 175301-803). The compact sensor is
The OPTITEMP TRA-C20 is a compact resistance sensor (RTD) with optional integrated transmitter and valve connector (EN 175301-803). The compact sensor is particularly designed for applications of OEM manufacturers where restricted installation space is an issue. The OPTITEMP TRA-C20 is a highly accurate sensor featuring great reliability over the long term, and excellent measuring stability. The compact sensor is suitable for measuring the temperature of liquids, gases and vapour from -50…+150°C / -58…+302°F.
Overview
The OPTITEMP TRA-C20 is a compact resistance sensor (RTD) with optional integrated transmitter and valve connector (EN 175301-803). The compact sensor is particularly designed for applications of OEM manufacturers where restricted installation space is an issue. The OPTITEMP TRA-C20 is a highly accurate sensor featuring great reliability over the long term, and excellent measuring stability. The compact sensor is suitable for measuring the temperature of liquids, gases and vapour from -50…+150°C / -58…+302°F.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases in confined spaces
- Vibration and shock resistant design
- With valve connector
- Sheath: Stainless steel (1.4404 / 316L)
- Long-term stability: Uncertainty of ±0.1% of span per year
- With optional built-in transmitter (4…20 mA)
OPTITEMP TRA-C10
The OPTITEMP TRA-C10 is a compact resistance sensor (RTD) with optional integrated transmitter for applications with limited space. The sensor is
The OPTITEMP TRA-C10 is a compact resistance sensor (RTD) with optional integrated transmitter for applications with limited space. The sensor is particularly designed for applications with hygienic requirements, e.g. in the food and beverage industry. It is made of stainless steel (1.4404 / 316 L) and has a surface finish of Ra 0.8 μm. It is best suited for measuring the temperature of gases, liquids and vapour from -50…+150°C / -58…+302°F. The OPTITEMP TRA-C10 is a highly accurate sensor featuring great reliability over the long term, and excellent measuring stability.
Overview
The OPTITEMP TRA-C10 is a compact resistance sensor (RTD) with optional integrated transmitter for applications with limited space. The sensor is particularly designed for applications with hygienic requirements, e.g. in the food and beverage industry. It is made of stainless steel (1.4404 / 316 L) and has a surface finish of Ra 0.8 μm. It is best suited for measuring the temperature of gases, liquids and vapour from -50…+150°C / -58…+302°F. The OPTITEMP TRA-C10 is a highly accurate sensor featuring great reliability over the long term, and excellent measuring stability.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Hygienic temperature measurement of liquids and gases in confined spaces
- Dead-zone free stainless steel (1.4404 / 316L) design
- Surface finish of wetted parts: Ra 0.8 µm (on request: <0.4 µm and electro polish)
- Long-term stability: ±0.1% of span per year
- With optional built-in transmitter (4…20 mA)
OPTITEMP TCA-TW59
The OPTITEMP TCA-TW59 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TW59 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TW59 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TW59 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TW59 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404/316L or 1.4571/316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TW58
The OPTITEMP TCA-TW58 is a weld-in thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TW58 is a weld-in thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F
The OPTITEMP TCA-TW58 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TW58 is a weld-in thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient. Its thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F
The OPTITEMP TCA-TW58 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TS54
The OPTITEMP TCA-TS54 is a threaded thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TS54 is a threaded thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-TS54 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS54 is a threaded thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-TS54 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TS53
The OPTITEMP TCA-TS53 is a threaded thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TS53 is a threaded thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in tanks, pipes and reactors, at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-TS53 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS53 is a threaded thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in tanks, pipes and reactors, at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F.
The OPTITEMP TCA-TS53 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TS52
The OPTITEMP TCA-TS52 is a threaded thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TS52 is a threaded thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for use in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TS52 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS52 is a threaded thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for use in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TS52 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TS37
The OPTITEMP TCA-TS37 is a threaded thermocouple (TCA) assembly with a straight barstock thermowell (based on form 9). The temperature assembly
The OPTITEMP TCA-TS37 is a threaded thermocouple (TCA) assembly with a straight barstock thermowell (based on form 9). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TCA-TS37 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS37 is a threaded thermocouple (TCA) assembly with a straight barstock thermowell (based on form 9). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TCA-TS37 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TS36
The OPTITEMP TCA-TS36 is a threaded thermocouple (TC) assembly with a straight barstock thermowell (based on form 7). The temperature assembly
The OPTITEMP TCA-TS36 is a threaded thermocouple (TC) assembly with a straight barstock thermowell (based on form 7). The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for process temperatures up to +600°C / +1100°F.
The OPTITEMP TCA-TS36 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS36 is a threaded thermocouple (TC) assembly with a straight barstock thermowell (based on form 7). The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed for process temperatures up to +600°C / +1100°F.
The OPTITEMP TCA-TS36 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TS35
The OPTITEMP TCA-TS35 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (DIN form 8). The temperature assembly
The OPTITEMP TCA-TS35 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (DIN form 8). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TCA-TS35 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The TC is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS35 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (DIN form 8). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F.
The OPTITEMP TCA-TS35 features a modular design with a union nut neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The TC is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Modular design: union nut neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-TS32
The OPTITEMP TCA-TS32 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (DIN form 5). The temperature assembly
The OPTITEMP TCA-TS32 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (DIN form 5). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical applications). It is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TS32 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TS32 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (DIN form 5). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical applications). It is designed for temperature measurement of liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TS32 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-TF57
The OPTITEMP TCA-TF57 is a flanged thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TF57 is a flanged thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks and reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TCA-TF57 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TF57 is a flanged thermocouple (TC) assembly with a reduced barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks and reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TCA-TF57 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TF56
The OPTITEMP TCA-TF56 is a flanged thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TF56 is a flanged thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TCA-TF56 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TF56 is a flanged thermocouple (TC) assembly with a tapered barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC sensor is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TCA-TF56 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L
- Chemically resistant PTFE or similar coating for all wetted parts available
- Temperature range: -40…+600°C / +1100°F
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- In eigensicherer Ausführung (Ex i) und mit druckfester Kapselung (Ex d) erhältlich: ATEX, IECEx
OPTITEMP TCA-TF55
The OPTITEMP TCA-TF55 is a flanged thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is
The OPTITEMP TCA-TF55 is a flanged thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TCA-TF55 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TF55 is a flanged thermocouple (TC) assembly with a straight barstock thermowell. The temperature assembly for advanced requirements is used when the strength of welded multipart thermowells is not sufficient and a high mechanical stress resistance of the thermowell is required. It is therefore particularly suitable for temperature measurement in pipes, tanks or reactors at higher flow velocities and pressures (e.g. in the petrochemical or oil and gas industry). The TC is designed to operate up to +600°C / +1100°F. The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media.
The OPTITEMP TCA-TF55 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-TF33
The OPTITEMP TCA-TF33 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell. The temperature assembly for advanced requirements
The OPTITEMP TCA-TF33 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell. The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TF33 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TF33 is a flanged thermocouple (TC) assembly with a straight welded multipart thermowell. The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a higher mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TF33 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Chemically resistant PTFE or similar coating for all wetted parts available
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-TF31
The OPTITEMP TCA-TF31 is a flanged thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4F). The temperature assembly
The OPTITEMP TCA-TF31 is a flanged thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4F). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TF31 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-TF31 is a flanged thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4F). The temperature assembly for advanced requirements is particularly suitable for use in pipes, tanks or reactors where a high mechanical stress resistance of the thermowell is required (e.g. petrochemical or oil and gas applications). The advantage of this sensor type is that its wetted parts can be coated (e.g. with PTFE), making it resistant to aggressive media. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-TF31 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L, 1.4571 / 316Ti, 1.7335 / 13CrMo44, 1.0460 / C22.8
- Chemically resistant PTFE or similar coating for all wetted parts available
- Temperature range: -40…+600°C / +1100°F
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-T30
The OPTITEMP TCA-T30 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4). The temperature assembly
The OPTITEMP TCA-T30 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4). The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient (e.g. in steam distribution systems). Its barstock thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-T30 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-T30 is a weld-in thermocouple (TC) assembly with a tapered barstock thermowell (based on form 4). The temperature assembly for advanced requirements is suitable for applications in pipes, tanks or reactors where flange or thread connections are no longer sufficient (e.g. in steam distribution systems). Its barstock thermowell also features a much higher mechanical stress resistance than welded multipart thermowells, making it particularly useful in applications with higher flow velocities and pressures. The TC is designed for temperature measurement of solids, liquids, gases and steam up to +600°C / +1100°F.
The OPTITEMP TCA-T30 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of solids, liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Thermowell material: 1.4404 / 316L, 1.4571 / 316Ti, 1.7335 / 13CrMo44, 1.0460 / C22.8
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe (Ex i) and flameproof (Ex d): ATEX, IECEx
OPTITEMP TCA-S50
The OPTITEMP TCA-S50 is a threaded thermocouple (TC) assembly without thermowell. The temperature assembly can be mounted to existing thermowells or
The OPTITEMP TCA-S50 is a threaded thermocouple (TC) assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. It is suitable for temperature measurement of liquids, gases and steam up to +1100°C / +1832°F. The TC sensor, however, cannot be operated without thermowell.
The OPTITEMP TCA-S50 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S50 is a threaded thermocouple (TC) assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. It is suitable for temperature measurement of liquids, gases and steam up to +1100°C / +1832°F. The TC sensor, however, cannot be operated without thermowell.
The OPTITEMP TCA-S50 features a modular design with a threaded neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: Flexible union neck tube or threaded DIN neck tube for easy exchange under operating conditions
- Without thermowell, sheath material: 2.4816 / Alloy 600
- Also suitable for installation into existing thermowells
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-S41
The OPTITEMP TCA-S41 is a threaded thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3G) in accordance
The OPTITEMP TCA-S41 is a threaded thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3G) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F. The thermocouple is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S41 is a threaded thermocouple (TC) assembly with a tapered welded multipart thermowell (based on form 3G) in accordance with NAMUR. The industrial temperature assembly for standard applications is suitable for use in pipes and tanks, at low to medium pressures and flow velocities. It is designed for temperature measurement of liquids and gases up to +600°C / +1100°F. The thermocouple is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Industrial temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-S34
The OPTITEMP TCA-S34 is a thermocouple (TC) assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine
The OPTITEMP TCA-S34 is a thermocouple (TC) assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. It is suitable for temperature measurement of liquids, gases and steam up to +1100°C / +1832°F. The TC sensor, however, cannot be operated without thermowell.
The OPTITEMP TCA-S34 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S34 is a thermocouple (TC) assembly without thermowell. The temperature assembly can be mounted to existing thermowells or machine housings by a thread connection or union nut. It is suitable for temperature measurement of liquids, gases and steam up to +1100°C / +1832°F. The TC sensor, however, cannot be operated without thermowell.
The OPTITEMP TCA-S34 features a modular design with a threaded standard neck tube that can be exchanged easily, even under operating conditions. This makes the temperature assembly very flexible. If it has been damaged from the outside, servicing can be carried out without process shut down. The thermocouple assembly can be combined with most thermowells. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids, gases and steam
- Modular design: threaded standard neck tube for easy exchange under operating conditions
- Without thermowell, sheath material: 2.4816 / Alloy 600
- Also suitable for installation into existing thermowells
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-S22
The OPTITEMP TCA-S22 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2G) and neck
The OPTITEMP TCA-S22 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The TC sensor is designed to operate up to +600°C / +1100°F.
Overview
The OPTITEMP TCA-S22 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. It can be used in pipes and tanks at low to medium pressures and flow velocities. The TC sensor is designed to operate up to +600°C / +1100°F.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-S21
The OPTITEMP TCA-S21 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 8). The industrial
The OPTITEMP TCA-S21 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 8). The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. The TC sensor can be used in pipes and tanks at low to medium pressures and flow velocities. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F.
Overview
The OPTITEMP TCA-S21 is a threaded thermocouple (TC) assembly with a reduced welded multipart thermowell (based on form 8). The industrial temperature assembly for standard applications is suitable for temperature measurement of liquids and gases where a fast response time is required. The TC sensor can be used in pipes and tanks at low to medium pressures and flow velocities. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-S12
The OPTITEMP TCA-S12 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2G) and neck
The OPTITEMP TCA-S12 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications can be screwed directly to the process pipe or tank. It is suitable for temperature measurement of gases and liquids up to +600°C / +1100°F. The TC sensor can be used at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S12 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 2G) and neck tube. The industrial temperature assembly for standard applications can be screwed directly to the process pipe or tank. It is suitable for temperature measurement of gases and liquids up to +600°C / +1100°F. The TC sensor can be used at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-S11
The OPTITEMP TCA-S11 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 8). The industrial
The OPTITEMP TCA-S11 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 8). The industrial temperature assembly can be screwed directly to the process pipe or tank. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F. The TC sensor is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Overview
The OPTITEMP TCA-S11 is a threaded thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 8). The industrial temperature assembly can be screwed directly to the process pipe or tank. It is predominantly used in applications with lower process temperatures up to +150°C / +302°F. The TC sensor is suitable for temperature measurement of liquids and gases, at low to medium pressures and flow velocities. It is available with ATEX and IECEx approvals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Temperature measurement of liquids and gases
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
- Available as intrinsically safe: ATEX, IECEx
OPTITEMP TCA-P65
The OPTITEMP TCA-P65 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a double gas-tight aluminium oxide
The OPTITEMP TCA-P65 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a double gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to 1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P65 can be mounted to pipes, stacks and ducts by a sliding flange.
Overview
The OPTITEMP TCA-P65 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a double gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to 1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P65 can be mounted to pipes, stacks and ducts by a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: Ceramic C799
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P64
The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic
The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P64 can be mounted to pipes, stacks or ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P64 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P64 can be mounted to pipes, stacks or ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: Ceramic C610 or C799
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P63
The OPTITEMP TCA-P63 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic
The OPTITEMP TCA-P63 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or other exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P63 can be mounted to pipes, stacks, ducts with a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P63 is a plug-in thermocouple (TC) assembly with a stainless steel holding tube and a gas-tight aluminium oxide ceramic thermowell with straight tip. The high temperature assembly is particularly suitable for temperature measurement of furnace or other exhaust gases up to +1600°C / +2900°F. It is best used in non-pressurised applications with low flow velocities (e.g. ovens). The OPTITEMP TCA-P63 can be mounted to pipes, stacks, ducts with a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: Ceramic C610 and C799
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P62
The OPTITEMP TCA-P62 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4762 / AISI 446
The OPTITEMP TCA-P62 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4762 / AISI 446 or 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P62 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P62 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4762 / AISI 446 or 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P62 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: 1.4762 / AISI 446 or 1.4767 / Kanthal AF
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P61
The OPTITEMP TCA-P61 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4835 / Alloy 253MA.
The OPTITEMP TCA-P61 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4835 / Alloy 253MA. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P61 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P61 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell made of 1.4835 / Alloy 253MA. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P61 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: 1.4835 / 253 MA
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter
OPTITEMP TCA-P60
The OPTITEMP TCA-P60 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 1) made of
The OPTITEMP TCA-P60 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 1) made of 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P60 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Overview
The OPTITEMP TCA-P60 is a plug-in thermocouple (TC) assembly with a straight welded multipart thermowell (based on form 1) made of 1.4767 / Kanthal AF. The high temperature assembly is particularly suitable for temperature measurement of flue and combustion gases up to +1150°C / +2100°F as well as in applications where the thermowell is exposed to mechanical abrasion. It can be used at low operational pressures. The OPTITEMP TCA-P60 can be mounted to pipes, stacks and ducts by a gas-tight compression fitting or a sliding flange.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- High temperature measurement of gases
- Thermowell material: 1.4767 / Kanthal AF
- Standard or customised lengths
- Different connection heads available (IP54…IP68)
- With optional temperature transmitter