The WATERFLUX 3050 is an electromagnetic flowmeter (EMF) for basic water applications. It offers cost-effective flow measurement in applications where extremely […]
The WATERFLUX 3050 features an extremely robust measuring tube with Rilsan® liner including various potable water approvals. It is available with current output (incl. HART®) or active pulse / frequency output and Modbus. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity and chances of flooding. A full on-site verification of the WATERFLUX 3050 without process interruption can be carried out using the OPTICHECK service tool.
The WATERFLUX 3050 is an electromagnetic flowmeter (EMF) for basic water applications. It offers cost-effective flow measurement in applications where extremely high accuracy, extensive diagnostics or a wide range of digital communication options are not a priority. Its measuring tube with a rectangular and reduced cross-section enables a stable measurement even at low flow rates. Due to the optimized flow profile, the meter is practically independent of interferences from the installation environment. It can be installed virtually anywhere without straight inlet or outlet runs – behind pipe bends, slide valves or a reduction in the pipe.
The WATERFLUX 3050 features an extremely robust measuring tube with Rilsan® liner including various potable water approvals. It is available with current output (incl. HART®) or active pulse / frequency output and Modbus. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity and chances of flooding. A full on-site verification of the WATERFLUX 3050 without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The TIDALFLUX 2300 is an electromagnetic flowmeter (EMF) with a patented, capacitive level measurement for use in partially filled pipes (up
The measuring tube of the TIDALFLUX 2300 comes with a polyurethane (PUR) liner for abrasion and chemical resistance. Its smooth surface prevents build-up of fat and other deposits which minimises the need for regular cleaning. For direct burial installation or applications in areas that can be partially flooded, the meter can be ordered as IP68 /NEMA 6P rated version. Due to the presence of flammable hydrogen sulphide (H2S) in many wastewater applications, the EMF also has ATEX / IECEx zone 1 approval. The TIDALFLUX 2300 comes with extensive diagnostics. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool.
The TIDALFLUX 2300 is an electromagnetic flowmeter (EMF) with a patented, capacitive level measurement for use in partially filled pipes (up to DN1600 / 64”). The meter is the ideal solution for flow measurement of municipal or industrial wastewater in pressureless transport lines. However, the EMF is also suitable for measurement of effluent brine from dredging, mining or sea/well water injection applications. Unlike open channel systems (Venturi, V-notches etc.) the inline flowmeter is a closed measuring solution without obstructions and with a much better accuracy at lower total costs of ownership.
The measuring tube of the TIDALFLUX 2300 comes with a polyurethane (PUR) liner for abrasion and chemical resistance. Its smooth surface prevents build-up of fat and other deposits which minimises the need for regular cleaning. For direct burial installation or applications in areas that can be partially flooded, the meter can be ordered as IP68 /NEMA 6P rated version. Due to the presence of flammable hydrogen sulphide (H2S) in many wastewater applications, the EMF also has ATEX / IECEx zone 1 approval. The TIDALFLUX 2300 comes with extensive diagnostics. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 2300 is an electromagnetic flowmeter (EMF) for all demanding applications with water and wastewater. The high-end meter is particularly
The OPTIFLUX 2300 features a “virtual reference” option, allowing for a measuring mode even without additional grounding rings. This enables substantial cost savings in terms of installation and procurement. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rated version. The OPTIFLUX 2300 offers various digital communication options. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 2300 is an electromagnetic flowmeter (EMF) for all demanding applications with water and wastewater. The high-end meter is particularly suitable for applications requiring high accuracy and extensive diagnostics. The EMF has the widest diameter range available in the market (DN25…3000 / 1…120″) and complies with requirements for custody transfer (MID MI-001, OIML R49). The flowmeter allows for custody transfer (CT) measurement without inlet/outlet runs (0D/0D) according to OIML R49 accuracy class 1. It has a wide range of approvals for potable water. This makes the OPTIFLUX 2300 an effective alternative to mechanical water meters, not least in CT measurement of potable water.
The OPTIFLUX 2300 features a “virtual reference” option, allowing for a measuring mode even without additional grounding rings. This enables substantial cost savings in terms of installation and procurement. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rated version. The OPTIFLUX 2300 offers various digital communication options. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The AF-E 400 is an electromagnetic flowmeter for utility applications and industrial automation. This ultra-compact mag meter is the ideal
The AF-E 400 is an electromagnetic flowmeter for utility applications and industrial automation. This ultra-compact mag meter is the ideal choice for applications with conductive liquids in tight spaces, e.g. in cooling lines of welding equipment, bending machines and robots or on chemical dosing skids. It features best-in-class accuracy in every flow range, allowing optimal processing in automation. The round bore reduction of the sensor makes the flowmeter more resilient in terms of increased pressure, ensuring high accuracy over a wide pressure and temperature range. Its integrated temperature measurement eliminates the need for an additional sensor.The AF-E 400 guarantees maximum flexibility when it comes to installation. Due to the special design of its magnetic circuit, field strength and electronics, this mag meter can be positioned in extreme proximity to one another (as close as 2 mm / 0.08″). It can thus be mounted in parallel without interference. The electromagnetic flowmeter offers various output and communication options. Among others, the device features an IO-Link and a Modbus option to provide operators with multiple sensor and application data for smarter factory automation. IO-Link also enables faster sensor installation or replacement.
The AF-E 400 is an electromagnetic flowmeter for utility applications and industrial automation. This ultra-compact mag meter is the ideal choice for applications with conductive liquids in tight spaces, e.g. in cooling lines of welding equipment, bending machines and robots or on chemical dosing skids. It features best-in-class accuracy in every flow range, allowing optimal processing in automation. The round bore reduction of the sensor makes the flowmeter more resilient in terms of increased pressure, ensuring high accuracy over a wide pressure and temperature range. Its integrated temperature measurement eliminates the need for an additional sensor.
The AF-E 400 guarantees maximum flexibility when it comes to installation. Due to the special design of its magnetic circuit, field strength and electronics, this mag meter can be positioned in extreme proximity to one another (as close as 2 mm / 0.08″). It can thus be mounted in parallel without interference. The electromagnetic flowmeter offers various output and communication options. Among others, the device features an IO-Link and a Modbus option to provide operators with multiple sensor and application data for smarter factory automation. IO-Link also enables faster sensor installation or replacement.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all
Its wear resistant liner materials as well as its full bore design without moving parts make the OPTIFLUX 2100 an effective replacement of mechanical water meters in drinking water distribution networks. The meter features a wide range of approvals necessary for potable water measurement. A full on-site verification of the meter without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 2100 is an electromagnetic flowmeter (EMF) for standard water and wastewater applications. It is the ideal solution for all general flow applications where reliable flow measurement with sufficient yet not extremely high accuracy is required. Installation in measurement chambers subject to (constant) flooding is possible with the remote IP68 / NEMA 6P rated version.
Its wear resistant liner materials as well as its full bore design without moving parts make the OPTIFLUX 2100 an effective replacement of mechanical water meters in drinking water distribution networks. The meter features a wide range of approvals necessary for potable water measurement. A full on-site verification of the meter without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 2050 is an electromagnetic flowmeter (EMF) for basic water and wastewater applications. It is suitable for all cost-effective measurements
The OPTIFLUX 2050 features a full bore design with wear resistant liner materials. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rated version. The EMF comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the OPTIFLUX 2050 without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 2050 is an electromagnetic flowmeter (EMF) for basic water and wastewater applications. It is suitable for all cost-effective measurements where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The EMF has a wide diameter range (DN25…1200 / 1…48″) and all drinking water approvals. The extra isolation of the electronic device and housing makes this EMF particularly suitable for use in areas with extreme humidity.
The OPTIFLUX 2050 features a full bore design with wear resistant liner materials. Installation in measurement chambers subject to (constant) flooding is possible with the IP68 / NEMA 6P rated version. The EMF comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the OPTIFLUX 2050 without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 1300 is an electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for applications with
The OPTIFLUX 1300 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. It comes with various digital communication options and is approved for use in hazardous areas. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 1300 is an electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for applications with conductive liquids (≥ 5 μS/cm) and higher solid content (up to 70%). Unlike the OPTIFLUX 1100, the OPTIFLUX 1300 offers a better accuracy. The flowmeter already meets the demands of many applications in various industries. It has established itself as the preferred solution for OEM machinery applications, dosing systems, compact skids, chemical handling systems or pump and firefighting systems.
The OPTIFLUX 1300 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. It comes with various digital communication options and is approved for use in hazardous areas. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for general
The OPTIFLUX 1100 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. A full on-site verification of the OPTIFLUX 1100 without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 1100 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is an economical solution for general applications with conductive liquids (≥5 μS/cm) and lower solid content (up to 10%). Unlike the basic device OPTIFLUX 1050, the OPTIFLUX 1100 offers a better accuracy. It is suitable for use in various industries – from water, wastewater and mobile applications to machine building (OEM), agriculture and utilities to firefighting.
The OPTIFLUX 1100 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. A full on-site verification of the OPTIFLUX 1100 without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for
The OPTIFLUX 1050 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. It comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, agriculture or firefighting where extremely high accuracy, extensive diagnostics or a wide range of communication options are not a priority. The extra isolation of the electronic device and housing makes this EMF also suitable for use in areas with extreme humidity.
The OPTIFLUX 1050 features a reinforced PFA liner and Hastelloy® electrodes that guarantee excellent chemical resistance and a large temperature range (up to +120°C / +248°F). The EMF has no internal moving parts, does not require maintenance and is insensitive to vibrations. It comes with current output (incl. HART®) or active pulse/frequency output and Modbus. A full on-site verification of the EMF without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The water analysis panel is a multi-parameter measuring system for applications in water treatment. It consists of single modules that
The water analysis panel is a multi-parameter measuring system for applications in water treatment. It consists of single modules that can be combined for measuring dissolved oxygen, turbidity, conductivity, pH and ORP. Depending on the requirements, the measuring system can thus be operated as a complete solution or with selected modules allowing configuration of different sensor types. This provides a high degree of flexibility in accordance with the application requirements. The pre-assembled and pre-wired analysis panel enables easy installation and fast commissioning. In this way, complexity and installation effort are significantly reduced as compared to spatially separated measuring points.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
TBEN-S2-4IOL is an IO-Link parameterisation set for commissioning, maintenance as well as power supply of KROHNE measuring devices featuring IO-Link.
TBEN-S2-4IOL is an IO-Link parameterisation set for commissioning, maintenance as well as power supply of KROHNE measuring devices featuring IO-Link. The multiprotocol I/O module with IO-Link master comes with a 230VAC/24VDC power supply, an Ethernet cable as well as a connection cable for IO-Link sensors. The parameterisation set can be operated with any FDT framework application such as PACTware. It enables direct connection of up to 8 digital devices. Featuring four IO-Link channels, the module allows connection of up to four IO-Link sensors or up to four I/O hubs for up to 64 measuring devices. In addition, the module’s integrated Ethernet/Fieldbus ports enable communication via PROFINET, EtherNet/IP and Modbus TCP protocols. On top of this, the module’s 4-pole M12 connectors can be used to power two measuring instruments.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTITEMP TT 12 R is a universal programmable 2-wire rail-mounted temperature transmitter for Pt100 and Pt1000 RTD elements or
When it comes to transmitter configuration, there is no need for expensive configuration tools or wired workstations. The rail-mounted transmitter is easily configured via NFC with any smartphone or tablet computer using the OPTICHECK Temperature Mobile app. The temperature transmitter provides a temperature linear current output (4…20 mA). A dedicated head-mounted version of the transmitter is available with the OPTITEMP TT 12 C.
The OPTITEMP TT 12 R is a universal programmable 2-wire rail-mounted temperature transmitter for Pt100 and Pt1000 RTD elements or thermocouple (TC) elements. The cost-effective transmitter offers reliable temperature measurement in all basic applications and is particularly suitable for use in the food and beverage industry and in HVAC installations. The OPTITEMP TT 12 R features an extremely compact design with a 6.5 mm width. There are different snap-in terminals available for the OPTITEMP TT 12 R that allow ease of installation. Thanks to its rugged design, the temperature transmitter withstands external influences such as shocks and vibrations up to 5 g.
When it comes to transmitter configuration, there is no need for expensive configuration tools or wired workstations. The rail-mounted transmitter is easily configured via NFC with any smartphone or tablet computer using the OPTICHECK Temperature Mobile app. The temperature transmitter provides a temperature linear current output (4…20 mA). A dedicated head-mounted version of the transmitter is available with the OPTITEMP TT 12 C.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTITEMP TT 12 C is a universal programmable 2-wire head-mounted temperature transmitter for Pt100 and Pt1000 RTD elements or
When it comes to transmitter configuration, there is no need for expensive configuration tools or wired workstations. The OPTITEMP TT 12 C is easily configured wirelessly via NFC with any smartphone or tablet computer using the OPTICHECK Temperature Mobile app. The temperature transmitter provides a temperature linear current output (4…20 mA). As an alternative it can also be mounted on a DIN rail using an optional rail mounting kit. A dedicated rail-mounted version for DIN rails is available with the OPTITEMP TT 12 R.
The OPTITEMP TT 12 C is a universal programmable 2-wire head-mounted temperature transmitter for Pt100 and Pt1000 RTD elements or thermocouple (TC) elements. The cost-effective transmitter offers reliable temperature measurement in all basic applications and is particularly suitable for use in the food and beverage industry and in HVAC installations. The OPTITEMP TT 12 C features an extremely compact design with a height of only 10.5 mm, offering ease of installation into all DIN B connection heads. Thanks to its rugged design, it withstands external influences such as shocks and vibrations up to 10 g.
When it comes to transmitter configuration, there is no need for expensive configuration tools or wired workstations. The OPTITEMP TT 12 C is easily configured wirelessly via NFC with any smartphone or tablet computer using the OPTICHECK Temperature Mobile app. The temperature transmitter provides a temperature linear current output (4…20 mA). As an alternative it can also be mounted on a DIN rail using an optional rail mounting kit. A dedicated rail-mounted version for DIN rails is available with the OPTITEMP TT 12 R.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
The OPTIFLUX 4400 electromagnetic flowmeter (EMF) is developed in accordance with IEC 61508 for safety-related applications up to safety integrity
Next to safety applications, the OPTIFLUX 4400 is particularly suitable for process applications with high accuracy requirements and difficult flow conditions such as pulsating and turbulent flow. Due to its wide selection of lining and electrode materials it can well be used for flow measurement and dosing of chemicals and corrosive liquids such as acids. Utilising the EMF’s improved conductivity measurement, operators can also monitor a defined range of conductivity.
The OPTIFLUX 4400 comes with a wide range of flowmeter and process diagnostics for a high degree of reliability. Among others, it features a best-in class diagnostic test interval incl. fault response time of only 2 minutes. If running out of spec, the flowmeter is able to issue an alarm to the control room much faster than other EMFs available on the market. A full on-site verification of the OPTIFLUX 4400 without process interruption can be carried out using the OPTICHECK service tool.
The OPTIFLUX 4400 electromagnetic flowmeter (EMF) is developed in accordance with IEC 61508 for safety-related applications up to safety integrity level (SIL) 2/3. It features automated partial proof testing capabilities, which allows to extend the time interval between full proof tests and increase plant uptime in safety instrumented systems (SIS).
Next to safety applications, the OPTIFLUX 4400 is particularly suitable for process applications with high accuracy requirements and difficult flow conditions such as pulsating and turbulent flow. Due to its wide selection of lining and electrode materials it can well be used for flow measurement and dosing of chemicals and corrosive liquids such as acids. Utilising the EMF’s improved conductivity measurement, operators can also monitor a defined range of conductivity.
The OPTIFLUX 4400 comes with a wide range of flowmeter and process diagnostics for a high degree of reliability. Among others, it features a best-in class diagnostic test interval incl. fault response time of only 2 minutes. If running out of spec, the flowmeter is able to issue an alarm to the control room much faster than other EMFs available on the market. A full on-site verification of the OPTIFLUX 4400 without process interruption can be carried out using the OPTICHECK service tool.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
. Industry-specific attributes Grade Industrial Warranty 1 years Other attributes Place of Origin Germany Customized support OEM Brand Name E+H
.
Industrial
1 years
Germany
OEM
E+H
FMP51-NCACCBAAA4GDJ+AK
E+H
wave radar level gauge
Rod probe :+/- 2 mm (0.08 in)
-50…+80 °C (-58…+176 °F)
-50…+200 °C (-58…+392 °F)
Vacuum…40 bar (Vacuum…580 psi)
GL/ ABS/ LR/ BV/ DNV
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Warranty 1 year Customized support OEM Brand Name Endress + Hauser Product name CM448R
Germany
1 year
OEM
Endress + Hauser
CM448R
Polycarbonate
220 (8.66) x 100 (3.94) x 98 (3.86) mm (inch) mm (inch)
-20…55°C / 0…130°F
IP20 transmitter IP66 optional Display
100% Original Package
100%Brand
PaypalTTWestern Union Trade Assurance
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
. Industry-specific attributes Type Variable Area Water Flowmeters, Variable Area Petrolum Flowmeters, Variable Area Oil Flowmeters, Electromagnetic Flowmeter Other attributes
.
Variable Area Water Flowmeters, Variable Area Petrolum Flowmeters, Variable Area Oil Flowmeters, Electromagnetic Flowmeter
ORIGINAL
1 year
OEM, ODM
KROHNE
OPTIFLUX4050C DN 50-DN 300
DN10-1200
0.5%MV
40 bar
We will add a separate outer package on the basis of krohne’s original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
. Industry-specific attributes Output Current 17A Other attributes Customized support Software reengineering Place of Origin Japen Brand Name Mitsubishi Model
.
17A
Software reengineering
Japen
Mitsubishi
FR-A840-00250-2-60
DC/AC Inverters
Triple
50/60hz
260*220*170mm
6.7kg
CE EAC
We will add a separate outer package on the basis of Mitsubishi original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Warranty 1 year Customized support OEM Brand Name Endress+Hauser Measuring principle ISFET Sensor ORP
Germany
1 year
OEM
Endress+Hauser
ISFET Sensor ORP / Redox Conductive oxygen
Plastic case: 144x144x159 mm
IP66, IP67 or NEMA 4X
ATEX, FM, NEPSI, TIIS
Plastic or stainless steel housing with EPDM sealings
Applicable: Pt100, Pt1000, NTC 30K
One channel transmitter for Memosens and analog
1/2 x 4 to 20 mA HART Profibus PA
We will add a separate outer package on the basis of Endress + Hauser’s original product packaging to ensure the safety of your purchased goods
Wuhan Customs
1500 Piece/Pieces per Month
. Industry-specific attributes Grade Industrial Warranty 1 year Other attributes Place of Origin Germany Customized support OEM Brand Name Endress+Hauser
.
Industrial
1 year
Germany
OEM
Endress+Hauser
FMU90-R11CA212AA3A
+/- 2mm + 0.17% of measured distance
IP66
-40 °C … 60 °C
ATEX, CS A
Ultrasonic
continuous/Liquids continuous/Solids Liquids
up to 2x 4 … 20 mA HART Profibus DP
FDU9x
We will add a separate outer package on the basis of Endress + Hauser’s original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
2000 Piece/Pieces per Month
. Industry-specific attributes Warranty 1 years Other attributes Place of Origin Germany Brand Name Endress+Hauser Model Number FMU43-APG2A2 Product name
.
1 years
Germany
Endress+Hauser
FMU43-APG2A2
Prosonic M FMU43
1 PC
+/- 4 mm or +/- 0.2 %of set measuring range 1)
-40 °C … 80 °C
-40 °C … 80 °C
0.7 bar … 2.5 bar abs
Liquid 15m/solid 7m
0.6 m
We will add a separate outer package on the basis of Endress + Hauser’s original product packaging to ensure the safety of your purchased goods
WuHan Customs
300 Piece/Pieces per Month
. Industry-specific attributes Type Variable Area Water Flowmeters, Variable Area Petrolum Flowmeters, Variable Area Oil Flowmeters, Electromagnetic Flowmeter Other attributes
.
Variable Area Water Flowmeters, Variable Area Petrolum Flowmeters, Variable Area Oil Flowmeters, Electromagnetic Flowmeter
Original
Krohne
OPTIFLUX2100W DN 50-DN300
DN2.5-DN1200
0.3%MV+1mm/s
40 bar
We will add a separate outer package on the basis of Krohne’s original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
. Industry-specific attributes Grade Industrial Warranty 1 year Other attributes Place of Origin Germany Customized support OEM Brand Name Endress+Hauser
.
Industrial
1 year
Germany
OEM
Endress+Hauser
FMU42-APB2A22A
-40…80 °C
-40…80 °C
0.7…2.5 bar abs
Liquid 10m/Solid 5m
0.4 m
We will add a separate outer package on the basis of Endress + Hauser’s original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
300 Plant/Plants per Month
Other attributes Place of Origin Germany Warranty 1 year Customized support OEM Brand Name Endress+Hauser Dimensions Plastic case: 144x144x159 mm
Germany
1 year
OEM
Endress+Hauser
Plastic case: 144x144x159 mm
IP66, IP67 or NEMA 4X
ATEX, FM, C SA, NEPSI, TIIS
We will add a separate outer package on the basis of Endress + Hauser’s original product packaging to ensure the safety of your purchased goods
Wuhan Customs
1500 Piece/Pieces per Month
. Industry-specific attributes Type Variable Area Water Flowmeters Other attributes Place of Origin Germany Warranty 1 years Customized support OEM,
.
Variable Area Water Flowmeters
Germany
1 years
OEM, ODM
E+H
5P3B1F-BBEBAAAFADED3K1AA1+AK
Proline Promass E 300 Coriolis flowmeter
100% Original Package
100%Brand
PaypalTTWestern Union Trade Assurance
DHL UPS Fedex Sea Air
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Warranty 1 years Customized support OEM Brand Name E+H Model Number 8E3B25-NBDMAEBFACSAD2SHA2+AK 8E3B40 Packaging
Germany
1 years
OEM
E+H
8E3B25-NBDMAEBFACSAD2SHA2+AK 8E3B40
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
100 Piece/Pieces per Month
Other attributes Place of Origin Germany Warranty 1 year Customized support OEM Brand Name E+H Model Number 8E3B25-NBDMAEBFACSAD2SHA2+AK Product Name
Germany
1 year
OEM
E+H
8E3B25-NBDMAEBFACSAD2SHA2+AK
8E3B25-NBDMAEBFACSAD2SHA2+AK
DC 24 V AC 100 to 230 V AC 100 to 230 V / DC 24 V
-40 to +150 °C (-40 to +302 °F)
0 to 180 000 kg/h (0 to 6615 lb/min)
Coriolis
100% Original Package
100%Brand
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Japen Brand Name YOKOGAWA Model Number EJA530E-JBS4N-017EL/NS21 Output 4-20mA DC Packaging and delivery Packaging Details
Other attributes Place of Origin Germany Brand Name SCHNEIDER Model Number TCSEGPA23F14F Range of Product Profibus DP Product or Component
Germany
SCHNEIDER
TCSEGPA23F14F
Profibus DP
Profibus DP V1 remote master
Industrial bus
RS485
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Brand Name SCHNEIDER Model Number BMXNOC0401 Range of Product Modicon M340 automation platform Product
Germany
SCHNEIDER
BMXNOC0401
Modicon M340 automation platform
Ethernet TCP/IP network module
Transparent Ready
TC
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Brand Name SCHNEIDER Model Number BMXRMS004GPF Range of Product Modicon M580 Accessory / Separate
Germany
SCHNEIDER
BMXRMS004GPF
Modicon M580
Memory card
100000
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Brand Name SCHNEIDER Model Number BMXAMO0802 Range of Product Modicon M340 automation platform Product
Germany
SCHNEIDER
BMXAMO0802
Modicon M340 automation platform
Counter module
8
10000 Hz
24 V DC type 3
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
Other attributes Place of Origin Germany Brand Name SCHNEIDER Model Number BMXAMO0802 Range of Product Modicon X80 Product or Component
Germany
SCHNEIDER
BMXAMO0802
Modicon X80
Analog output module
20 ways 1 connector
non isolated
We will add a separate outer package on the basis of the original product packaging to ensure the safety of your purchased goods.
Wuhan Customs
1000 Piece/Pieces per Month
