BM26A-1000
The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for […]
The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals.The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.
Overview
The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals.
The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Best price/performance ratio
- Rugged metallic design
- Easy to install, safe and no commissioning
- Flaps housed in hermetically sealed glass tube (IP68)
- Highly visible level indication works without power supply
- Optional Plexiglas® anti-icing indication
- Available with optional reed switches (3-wire, NAMUR) or reed-chain level transmitter (4…20 mA/HART®7, FF, PA output)
OPTISWITCH 6700
The OPTISWITCH 6700 is a capacitance level switch for hygienic and general industrial applications requiring IO-Link communication. It detects high
The OPTISWITCH 6700 is a capacitance level switch for hygienic and general industrial applications requiring IO-Link communication. It detects high or low level and is therefore ideally suited for overfill and empty tank prevention or for dry-run protection of pumps. The device is also designed for the detection of liquid-liquid interfaces or change of media characteristics.
In addition to standard G or NPT male threads, the frequency sweep level switch comes with G thread for hygienic adapters. This makes it a powerful solution for level detection in food applications, e.g. with water, beer, cream as well as viscous or sticky such as honey. Even sugar, flour or other dry solids can be detected. Due to its resistance to cleaning agents and steam, the level switch also makes a perfect choice for monitoring CIP and SIP cleaning procedures.
Overview
The OPTISWITCH 6700 is a capacitance level switch for hygienic and general industrial applications requiring IO-Link communication. It detects high or low level and is therefore ideally suited for overfill and empty tank prevention or for dry-run protection of pumps. The device is also designed for the detection of liquid-liquid interfaces or change of media characteristics.
In addition to standard G or NPT male threads, the frequency sweep level switch comes with G thread for hygienic adapters. This makes it a powerful solution for level detection in food applications, e.g. with water, beer, cream as well as viscous or sticky such as honey. Even sugar, flour or other dry solids can be detected. Due to its resistance to cleaning agents and steam, the level switch also makes a perfect choice for monitoring CIP and SIP cleaning procedures.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Level switch with IO-Link communication for automated sensor configuration
- Problem solver for adhesions and difficult: level detection not affected by product build-up, foam or condensate
- Two switching outputs for different trigger thresholds allow monitoring of different processes or measured media
- Switch points can be indicated by 360° multicolour LEDs: available with transparent polycarbonate collar or with the LEDs collar-protected by a metal crown
- Stainless steel housing with PEEK sensor material
- Optimal sensor shape: Easy-to-clean, minimised risk of clogging by sticky
- Maintenance-free, can be installed in any mounting position
- Wide variety of hygienic adapters available
- Also available with a sliding connection for tanks with thick wall thickness / insulation or to overcome high process temperature
- Sensor version with reverse-threaded G¾ connection allows for mounting in a pipe extension tube for low level detection from the top
- Adaptive trigger for quick-set-up and commissioning
OPTISWITCH 6600
The OPTISWITCH 6600 is a capacitance level switch for hygienic and industrial applications. The switch detects high or low level
The OPTISWITCH 6600 is a capacitance level switch for hygienic and industrial applications. The switch detects high or low level or serves as overfill, dry-run or pump protection. The device can also detect liquid-liquid interfaces or a change of media characteristics. It operates independently of the mounting position. With a reverse thread, it can be mounted into an extension tube for a top-mounted low level detection. The microwave level switch is resistant to CIP and SIP agents.
Overview
The OPTISWITCH 6600 is a capacitance level switch for hygienic and industrial applications. The switch detects high or low level or serves as overfill, dry-run or pump protection. The device can also detect liquid-liquid interfaces or a change of media characteristics. It operates independently of the mounting position. With a reverse thread, it can be mounted into an extension tube for a top-mounted low level detection. The microwave level switch is resistant to CIP and SIP agents.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Unaffected by foam, condensate or build-up of deposits
- Can be set to detect foam or even a change in media characteristics of the same liquid
- Very fast response times
- Maintenance-free, can be installed in any position
- Large choice of hygienic process connections
- EHEDG and 3A certified; complies with FDA and EC1935/2004
- Lloyd’s Register and DNV approvals for the marine industry
- Suited for ATEX hazardous areas
OPTISWITCH 6500
The OPTISWITCH 6500 is a capacitance level switch for level detection in hygienic applications or any environment requiring minimally invasive
The OPTISWITCH 6500 is a capacitance level switch for level detection in hygienic applications or any environment requiring minimally invasive sensors. It detects low or high level and is often used as dry-run or overfill protection. The device is able to detect foam or even a change in media characteristics of the same liquid (e.g. degree of pollution of water). The microwave level switch is resistant to CIP and SIP agents.
Overview
The OPTISWITCH 6500 is a capacitance level switch for level detection in hygienic applications or any environment requiring minimally invasive sensors. It detects low or high level and is often used as dry-run or overfill protection. The device is able to detect foam or even a change in media characteristics of the same liquid (e.g. degree of pollution of water). The microwave level switch is resistant to CIP and SIP agents.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Unaffected by foam, condensate or build-up
- Can be set to detect foam or even a change in media characteristics of the same liquid
- For media with dielectric constant >1.5
- Very fast response times
- Maintenance-free ‐ can be installed in any position
- Wide variety of hygienic process connections available
- Also available with a sliding connection for tanks with thick wall thickness / insulation or to overcome high process temperature
- EHEDG and 3A certified; complies with FDA and EC1935/2004
OPTISWITCH 5250
The OPTISWITCH 5250 is a vibration level switch with a polished probe extension and tuning fork for liquid hygienic applications. It
The OPTISWITCH 5250 is a vibration level switch with a polished probe extension and tuning fork for liquid hygienic applications. It is a universal and reliable device for level detection in vessels. It detects low or high level and is mostly used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Overview
The OPTISWITCH 5250 is a vibration level switch with a polished probe extension and tuning fork for liquid hygienic applications. It is a universal and reliable device for level detection in vessels. It detects low or high level and is mostly used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Polished tuning fork with a large choice of hygienic process fittings
- Optional gas-tight lead-through for toxic gases
- Outputs: relay, transistor, 2-wire, NAMUR or contactless electronic switch
- Optional adapter for temperatures up to +250°C / +482°F
- In compliance with FDA and EC1935/2004
OPTISWITCH 5200
The OPTISWITCH 5200 is a vibration level switch with rigid probe extension. It is a universal device for liquid applications and
The OPTISWITCH 5200 is a vibration level switch with rigid probe extension. It is a universal device for liquid applications and designed for liquid level detection in vessels. The level switch is mostly used for overfill, dry-run or pump protection.
Overview
The OPTISWITCH 5200 is a vibration level switch with rigid probe extension. It is a universal device for liquid applications and designed for liquid level detection in vessels. The level switch is mostly used for overfill, dry-run or pump protection.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Large choice of process fittings and housing materials
- Process connection option for high temperatures up to +250°C / +482°F
- Outputs: relay, transistor, 2-wire, NAMUR or contactless electronic switch
- Optional gas-tight lead-through for toxic gases
- Suited for hazardous and non-hazardous areas
- SIL2-compliant
OPTISWITCH 5150
The OPTISWITCH 5150 is a vibration level switch with polished tuning fork for liquid hygienic applications. It is a universal and
The OPTISWITCH 5150 is a vibration level switch with polished tuning fork for liquid hygienic applications. It is a universal and reliable device for level detection in vessels. It detects low or high level and is mostly used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Overview
The OPTISWITCH 5150 is a vibration level switch with polished tuning fork for liquid hygienic applications. It is a universal and reliable device for level detection in vessels. It detects low or high level and is mostly used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Polished tuning fork with a large choice of hygienic process fittings
- Optional adapter for high temperatures up to +250°C / +482°F
- Outputs: relay, transistor, 2-wire, NAMUR or contactless electronic switch
- Optional gas-tight lead-through for toxic gases
- In compliance with FDA and EC1935/2004
OPTISWITCH 5100
The OPTISWITCH 5100 is a vibration level switch for liquids in process applications. It is a universal and reliable device for
The OPTISWITCH 5100 is a vibration level switch for liquids in process applications. It is a universal and reliable device for limit level detection in vessels. It detects low or high level and is used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Overview
The OPTISWITCH 5100 is a vibration level switch for liquids in process applications. It is a universal and reliable device for limit level detection in vessels. It detects low or high level and is used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Large choice of process fittings and housing materials
- Optional adapter for high temperatures up to +250°C / +482°F
- Outputs: relay, transistor, 2-wire, NAMUR or contactless electronic switch
- Optional gas-tight lead-through for toxic gases
- Suited for hazardous and non-hazardous areas
- SIL2-compliant
OPTISWITCH 5300
The OPTISWITCH 5300 is a vibration level switch for heavy duty applications. It is designed for high/low level alarm, overfill
The OPTISWITCH 5300 is a vibration level switch for heavy duty applications. It is designed for high/low level alarm, overfill protection or pump dry-run detection in processes from cryogenic to +450°C / +842°F. Its pressure range (up to 160 barg / 2321 psig) meets boiler standards covering virtually all saturated steam applications. With its corrosion-resistant tuning fork (Inconel® 718), an optional 2nd process seal (ceramic) and an extensive set of approvals (WHG, NACE, Ship, Ex, Boiler and SIL) it is the ideal device for harsh environments such as refineries or offshore platforms.
Overview
The OPTISWITCH 5300 is a vibration level switch for heavy duty applications. It is designed for high/low level alarm, overfill protection or pump dry-run detection in processes from cryogenic to +450°C / +842°F. Its pressure range (up to 160 barg / 2321 psig) meets boiler standards covering virtually all saturated steam applications. With its corrosion-resistant tuning fork (Inconel® 718), an optional 2nd process seal (ceramic) and an extensive set of approvals (WHG, NACE, Ship, Ex, Boiler and SIL) it is the ideal device for harsh environments such as refineries or offshore platforms.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Detection of liquids with very low densities, optional down to ≥0.42 kg/l or 26.22 lb/ft3
- Unaffected by dielectrics, density or turbulences
- Adjustment-free setup and simple maintenance
- Extra safe with second process seal (ceramic)
- Self-monitoring sensor and electronics element
- Functional test possible during operation
- Ex, WHG, SIL, NACE and various ship approvals
- SIL2/3-compliant
OPTISWITCH 4000
The OPTISWITCH 4000 is a vibration level switch for simple liquid applications. It is a universal and cost-effective device for level
The OPTISWITCH 4000 is a vibration level switch for simple liquid applications. It is a universal and cost-effective device for level detection in small vessels. It detects low or high level and is mostly used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Overview
The OPTISWITCH 4000 is a vibration level switch for simple liquid applications. It is a universal and cost-effective device for level detection in small vessels. It detects low or high level and is mostly used for overfill, dry-run or pump protection. Installations in pipelines are also possible.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Simple and robust tuning fork
- Virtually unaffected by the chemical and physical properties of liquids
- Outputs: contactless electronic switch or transistor
- Optional version for hygienic applications
OPTISWITCH 3300
The OPTISWITCH 3300 is a vibration level switch with tube extension for applications with bulk solids or powders. This robust level
The OPTISWITCH 3300 is a vibration level switch with tube extension for applications with bulk solids or powders. This robust level device detects the MIN or MAX levels of abrasive media and operates reliably even in applications with extremely low density. Its tube extension enables level detection in thick-walled silos or for a more flexible position of the switching point, e.g. in media that form a cone of bulk goods.
Overview
The OPTISWITCH 3300 is a vibration level switch with tube extension for applications with bulk solids or powders. This robust level device detects the MIN or MAX levels of abrasive media and operates reliably even in applications with extremely low density. Its tube extension enables level detection in thick-walled silos or for a more flexible position of the switching point, e.g. in media that form a cone of bulk goods.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Abrasion resistant and highly robust tuning fork
- Simple setup without product
- Unaffected by product properties (maintenance-free)
- Optional version to detect solids in water
- Remote housing up to 25 m / 82 ft
OPTISWITCH 3200
The OPTISWITCH 3200 is a vibration level switch with suspension cable for solid applications such as high level alarm on aggregate
The OPTISWITCH 3200 is a vibration level switch with suspension cable for solid applications such as high level alarm on aggregate silos. The flexible suspension cable avoids mechanical strain caused by movements of the bulk solids. It is suitable for applications with a low density (e.g. aerosol) or for the detection of solids in water (e.g. in sedimentation tanks of hydro-electric power stations).
Overview
The OPTISWITCH 3200 is a vibration level switch with suspension cable for solid applications such as high level alarm on aggregate silos. The flexible suspension cable avoids mechanical strain caused by movements of the bulk solids. It is suitable for applications with a low density (e.g. aerosol) or for the detection of solids in water (e.g. in sedimentation tanks of hydro-electric power stations).
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Abrasion resistant and highly robust tuning fork
- Simple setup without product
- Unaffected by changes of product properties (maintenance-free)
- Optional version to detect solids in water
- Remote housing up to 25 m / 82 ft
OPTISWITCH 3100
The OPTISWITCH 3100 is a compact vibration level switch suitable for solids. It can be used for applications with a low
The OPTISWITCH 3100 is a compact vibration level switch suitable for solids. It can be used for applications with a low density (e.g. aerosol) or for solid detection (e.g. in the water of sedimentation tanks at hydro-electric power stations).
Overview
The OPTISWITCH 3100 is a compact vibration level switch suitable for solids. It can be used for applications with a low density (e.g. aerosol) or for solid detection (e.g. in the water of sedimentation tanks at hydro-electric power stations).
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Abrasion resistant and highly robust design
- Simple setup without product
- Unaffected by changes of product properties (maintenance-free)
- Optional version to detect solids in water
- Remote housing up to 25 m / 82 ft
OPTIBAR DP 7060with diaphragm seal
The OPTIBAR DP 7060 with single- or two-sided OPTIBAR DSD diaphragm seal is a pressure transmitter for differential pressure, level, density and
The OPTIBAR DP 7060 with single- or two-sided OPTIBAR DSD diaphragm seal is a pressure transmitter for differential pressure, level, density and interface measurement. It can be used in pressurised pipes, tanks and closed vessels. Its wide selection of inline or membrane diaphragm seals makes it particularly suitable for extremely aggressive and corrosive media, abrasive and highly viscous liquids or for hygienic applications. For applications with sudden pressure and temperature changes (up to +400°C / +842°F) or vibration, the pressure transmitter can be combined with one or two capillary diaphragm seals. The differential pressure device comes with a wide range of process connections. It has approvals for use in hazardous areas and comes with various digital communication options.
Overview
The OPTIBAR DP 7060 with single- or two-sided OPTIBAR DSD diaphragm seal is a pressure transmitter for differential pressure, level, density and interface measurement. It can be used in pressurised pipes, tanks and closed vessels. Its wide selection of inline or membrane diaphragm seals makes it particularly suitable for extremely aggressive and corrosive media, abrasive and highly viscous liquids or for hygienic applications. For applications with sudden pressure and temperature changes (up to +400°C / +842°F) or vibration, the pressure transmitter can be combined with one or two capillary diaphragm seals. The differential pressure device comes with a wide range of process connections. It has approvals for use in hazardous areas and comes with various digital communication options.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Available with a wide range of diaphragm seals (single- or two-sided)
- Vibration resistant with capillary tube attachment
- Available wetted materials:
- Wetted materials: Stainless steel (1.4404 / 316L), tantalum, Hastelloy®C-276, titanium grade 2, Monel®400, duplex, 1.4404 / 316 L with gold coating
- PFA coating: FDA and EC1935/2004 conform, complies with Ex requirements, suitable for vacuum and aseptic applications, temperature limit up to +260°C / 500°F (up to +200°F / +392°F for vacuum applications)
- PTFE coating: suitable for vacuum applications up +200°C / +392°F, complies Ex requirements, FDA and EC1935/2004 conform
- With OPTIBAR DP 7060 high-performance transmitter:
- Unique 3D linearisation: compensates for all influencing factors at virtually all possible combinations
- Very good repeatability and long-term stability of the measuring signal
- Integrated absolute pressure measurement for lowest possible influence of static pressure changes on the signal
- Ex ia, Ex d approvals
- SIL 2/3
BW 25
The BW 25 is a loop-powered displacer level transmitter for measuring and/or detecting liquid level or liquid-liquid interface under extreme process
The BW 25 is a loop-powered displacer level transmitter for measuring and/or detecting liquid level or liquid-liquid interface under extreme process conditions. It can deal with corrosive media, high temperatures (up to +400°C / +752°F) and high pressures (up to 400 barg / 5801 psig).
The BW 25 can be used as level indicator without the need of auxiliary power supply. Equipped with a switch module the unit can be used as level switch. With a transmitter module, the unit will function as level transmitter. The three function modes can be combined. Retrofitting the device for receiving add-on functionality is possible without interrupting the process. The BW 25 can also be installed in a bypass chamber, e.g. for applications with agitators.
Overview
The BW 25 is a loop-powered displacer level transmitter for measuring and/or detecting liquid level or liquid-liquid interface under extreme process conditions. It can deal with corrosive media, high temperatures (up to +400°C / +752°F) and high pressures (up to 400 barg / 5801 psig).
The BW 25 can be used as level indicator without the need of auxiliary power supply. Equipped with a switch module the unit can be used as level switch. With a transmitter module, the unit will function as level transmitter. The three function modes can be combined. Retrofitting the device for receiving add-on functionality is possible without interrupting the process. The BW 25 can also be installed in a bypass chamber, e.g. for applications with agitators.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Transmitter, level switch and indicator in one device
- Easy adjustable level switch with max. 2 set points
- Can be used as mechanical indicator without auxiliary power supply
- Modular design for retrofitting under process conditions
- Welded process seal with external mount housing
OPTISOUND 3020
The OPTISOUND 3020 is a 2- or 4-wire ultrasonic level transmitter for basic applications. It is particularly suitable for use in
The OPTISOUND 3020 is a 2- or 4-wire ultrasonic level transmitter for basic applications. It is particularly suitable for use in small and medium-sized tanks up to 8 m / 26.3 ft. The level transmitter measures rainwater and wastewater, liquids with a high degree of contamination, corrosive liquids or solids.
Overview
The OPTISOUND 3020 is a 2- or 4-wire ultrasonic level transmitter for basic applications. It is particularly suitable for use in small and medium-sized tanks up to 8 m / 26.3 ft. The level transmitter measures rainwater and wastewater, liquids with a high degree of contamination, corrosive liquids or solids.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Resistant to corrosive environments
- Available with optional mounting bracket for easy alignment of the sensor
OPTISOUND 3010
The OPTISOUND 3010 is a 2- or 4-wire ultrasonic level transmitter for basic applications up to 5 m / 16.4 ft. It is designed
The OPTISOUND 3010 is a 2- or 4-wire ultrasonic level transmitter for basic applications up to 5 m / 16.4 ft. It is designed for continuous measurement of liquids such as rainwater and wastewater as well as bulk solids in nearly all sectors of industry. The level transmitter is particularly suitable for use in small tanks or in open channels for flow measurement.
Overview
The OPTISOUND 3010 is a 2- or 4-wire ultrasonic level transmitter for basic applications up to 5 m / 16.4 ft. It is designed for continuous measurement of liquids such as rainwater and wastewater as well as bulk solids in nearly all sectors of industry. The level transmitter is particularly suitable for use in small tanks or in open channels for flow measurement.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Continuous, non-contact level measurement
- Maintenance free operation
- Measures independent of varying medium characteristics
- Suitable for profile measurement on conveyor belts
- Suitable for use in corrosive environments
- Available with optional mounting bracket for easy alignment of the sensor
POWERFLEX 2200
The POWERFLEX 2200 is a 2-wire 4…20 mA guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. The device
The POWERFLEX 2200 is a 2-wire 4…20 mA guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. The device is designed to operate in safety-related and non-safety-related liquid applications of the nuclear power industry. It has been qualified according to IEEE 323, IEEE 344 and RCC-E and conforms to nuclear standards such as ASME Section III or RCC-M.
For high radiation levels, the converter can be installed up to 400 m / 1312 ft away from the probe (POWERFLEX 2200 D). High resistance to radiation, seismic and thermal qualifications as well as an extensive set of designs and options, have referenced the POWERFLEX for nuclear applications such as liquid level measurement in spent fuel pools and pressurized tanks.
Overview
The POWERFLEX 2200 is a 2-wire 4…20 mA guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. The device is designed to operate in safety-related and non-safety-related liquid applications of the nuclear power industry. It has been qualified according to IEEE 323, IEEE 344 and RCC-E and conforms to nuclear standards such as ASME Section III or RCC-M.
For high radiation levels, the converter can be installed up to 400 m / 1312 ft away from the probe (POWERFLEX 2200 D). High resistance to radiation, seismic and thermal qualifications as well as an extensive set of designs and options, have referenced the POWERFLEX for nuclear applications such as liquid level measurement in spent fuel pools and pressurized tanks.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Referenced for nuclear applications
- Four versions to suit safety- and non-safety-related applications
- Conforms to nuclear standards (e.g. ASME Section III, RCC-M)
- Qualified according to IEEE Std 323, IEEE Std 344 and RCC-E
- For high radiation levels, the converter can be installed up to 450 m / 1476.38 ft away from the probe
- High resistance to radiation (probe and cable)
- Seismic qualification up to 300 m/s2
- Thermal aging qualification: +107°C / +224.6°F for 296 days
- DPR (Dynamic Parasite Rejection): the software dynamically eliminates false reflections caused by environmental disturbances and product build-up
- Quick coupling system: converter is rotatable and removable under process conditions
- Display keypad directly accessible without opening the cover
- Measuring range up to 40 m / 131 ft
- Design conforms to IEC 61508
- Conforms to IEC 61513
- The device has FDT1.2 DTM certification
OPTIFLEX 6200
The OPTIFLEX 6200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed
The OPTIFLEX 6200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for the level measurement of solids in bulk storage and other silos up to a height of 40 m / 131.2 ft. The single rod or single cable probes withstand high traction loads, making the level transmitter suitable for use in a wide range of applications with solids of different grain sizes – from fly ash and cement to gypsum and plastic granulates to tobacco and starch. This guided radar is equally suitable for applications involving milk, sugar, chocolate or coffee powder.
The OPTIFLEX 6200 is insensitive to dusty atmospheres or deposits on the probe. For applications that are difficult to access, a transmitter version with remote converter can be installed 100 m / 328 ft away from the probe. The converter comes with aluminium or stainless steel housing and is compatible with previous KROHNE TDR generations.
Overview
The OPTIFLEX 6200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for the level measurement of solids in bulk storage and other silos up to a height of 40 m / 131.2 ft. The single rod or single cable probes withstand high traction loads, making the level transmitter suitable for use in a wide range of applications with solids of different grain sizes – from fly ash and cement to gypsum and plastic granulates to tobacco and starch. This guided radar is equally suitable for applications involving milk, sugar, chocolate or coffee powder.
The OPTIFLEX 6200 is insensitive to dusty atmospheres or deposits on the probe. For applications that are difficult to access, a transmitter version with remote converter can be installed 100 m / 328 ft away from the probe. The converter comes with aluminium or stainless steel housing and is compatible with previous KROHNE TDR generations.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Designed to withstand high traction loads (<3.6 t)
- Specific algorithm for low-reflective media
- ESD protection (24 kV) for increased resistance to electrostatic discharges
- Various converter and electronic versions to facilitate access to the device:
- Available as compact version (C) or with remote converter (F) up to 100 m / 328 ft
- Horizontal or vertical housing to suit every installation
- Converter is rotatable and removable under process conditions and compatible with all previous Guided Radar (TDR) level transmitters made by KROHNE
- Weather protection – protects the converter in extreme weather events
- Stainless-steel housing for corrosive environment
- SIL 2/3 (in preparation)
- ±2 mm /±0.08″ accuracy
- Real-time clock for event logging
- 3-year warranty
OPTIFLEX 3200
The OPTIFLEX 3200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed
The OPTIFLEX 3200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for the measurement of level and interface in the food, beverage and pharmaceutical industry. The TDR is insensitive to steam, foam or condensation and suitable for a large variety of liquids with hygienic requirements. The wetted parts have a gap-free hygienic design that ensures simple and reliable cleanability (CIP/SIP). Dedicated industry-specific probes and process connections as well as various converter and electronic versions are available to suit every installation and facilitate device access.
Overview
The OPTIFLEX 3200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for the measurement of level and interface in the food, beverage and pharmaceutical industry. The TDR is insensitive to steam, foam or condensation and suitable for a large variety of liquids with hygienic requirements. The wetted parts have a gap-free hygienic design that ensures simple and reliable cleanability (CIP/SIP). Dedicated industry-specific probes and process connections as well as various converter and electronic versions are available to suit every installation and facilitate device access.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Hygienic probes and process connections for the food and beverage as well as pharmaceutical industry
- Suitable for SIP (Sterilisation In Place) and CIP (Cleaning In Place)
- Insensitive to steam, foam and condensation
- Measurement of interfaces starting at 50 mm / 1.97″
- Various converter and electronic versions to facilitate access to the device:
- Available as compact version (C) or with remote converter (F) up to 100 m / 328 ft
- Horizontal or vertical housing to suit every installation
- Converter is rotatable and removable under process conditions and compatible with all previous Guided Radar (TDR) level transmitters made by KROHNE
- Cast stainless steel or aluminium housing
- ±2 mm /±0.08″ accuracy
- Real-time clock for event logging
- 3-year warranty
OPTIFLEX 8200
The OPTIFLEX 8200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed
The OPTIFLEX 8200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for level and interface measurement under extreme conditions in the power, oil and gas industries. For high safety requirements in applications with dangerous media, the OPTIFLEX 8200 features a single or double ceramic process seal system. Various converter and electronic versions like a remote converter or a sensor extension facilitate the access to the device. The level transmitter has approvals for use in hazardous areas.
Specifications
Depending on selected device configuration
General information
| Product type | Level transmitter |
| Product family name | OPTIFLEX |
| Product positioning | For liquids at high temperature and pressure |
| Measurement variables | Distance, Level, Mass, Volume, Dielectric constant |
| Measurement principle | Guided radar (TDR) |
| Level measurement type | Continuous measurement |
| Contact to measured medium | Yes |
| Interface measurement | Yes |
| Measured media | Liquids, Liquid/liquid interface |
| Measuring range (liquids) | 0.6…60 m 1.97…196.85 ft |
| Probe length units to display | m/ft |
| Probe length | 0.6…60 m 1.97…196.85 ft |
| Probe diameter |
|
| Measuring point | Pressurised tank, Stilling well, Bypass |
Operating conditions
| Process pressure | -1… 320 barg -14.5… 4641 psig |
| Process temperature | -50…+315°C -58…+599°F |
Materials
| Gaskets | Ethylene propylene diene monomer (EPDM), Fluoroelastomer rubber (FKM/FPM), Kalrez® 7075, Ceramic |
| Wetted parts | Austenitic stainless steel (1.4404/316L), Austenitic alloy (2.4602/Alloy 22), Ceramic |
Process connections
| Flange connections | EN (1092-1): DN25…200 ASME (B 16.5): 1…8″ JIS (B 2220): 40…100A |
| Thread connections | Male: G1, G1½ 1 NPT, 1½ NPT |
Approvals/Standards
| Ingress protection | IP66/68, NEMA4X/6 |
| Certificates/Approvals Ex | ATEX, cQPSus, IECEx, NEPSI, INMETRO |
| Certificates/Approvals Others | NACE |
| Certificates/Approvals Safety | SIL 2 |
| NAMUR compliance | NE 107, NE 21, NE 43, NE 53 |
Communication
| Analogue outputs | 4…20 mA |
| Discrete outputs | Relay |
| Digital outputs | HART® |
Accuracy
| Accuracy (liquids) | ±2 mm ±0,08 |
OPTIFLEX 7200
The OPTIFLEX 7200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. With its
The OPTIFLEX 7200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. With its large choice of probe types and materials, this level transmitter is the high-end guided radar for level and interface measurement in the chemical or oil and gas industries. It is suitable for storage or process tanks up to 60 m / 196.85 ft, containing all kind of liquids – from hydrocarbons like slop oil or benzene to solvents and acids to cooling water or condensate.
The OPTIFLEX 7200 can be used at extended temperature and pressure conditions. Various converter and electronic versions like a remote converter or a sensor extension facilitate the access to the device. The level transmitter has approvals for use in hazardous areas.
Overview
The OPTIFLEX 7200 is a 2-wire guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. With its large choice of probe types and materials, this level transmitter is the high-end guided radar for level and interface measurement in the chemical or oil and gas industries. It is suitable for storage or process tanks up to 60 m / 196.85 ft, containing all kind of liquids – from hydrocarbons like slop oil or benzene to solvents and acids to cooling water or condensate.
The OPTIFLEX 7200 can be used at extended temperature and pressure conditions. Various converter and electronic versions like a remote converter or a sensor extension facilitate the access to the device. The level transmitter has approvals for use in hazardous areas.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Extensive choice of probes for all applications:
- Ø42 mm / 1.65″ coaxial probe made of 316L or HC22
- Fully TFM-T62 PTFE-coated rod
- Special materials available on request e.g. Monel®, tantalum, titanium, duplex
- Ceramic process seal system for demanding process conditions
- Reversed interface measurement
- Patented Dynamic Gas-phase Compensation (DGC) without increased blocking distance (in preparation)
- Various converter and electronic versions to facilitate access to the device:
- Available as compact version (C) or with remote converter (F) up to 100 m / 328 ft
- Sensor extension with compact version (S) up to 15 m / 49.2 ft
- Double sensor extension with remote version (D) up to 115 m / 377.3 ft
- Horizontal or vertical housing to suit every installation
- Converter is rotatable and removable under process conditions and compatible with all previous Guided Radar (TDR) level transmitters made by KROHNE
- Stainless steel housing for corrosive environment
- Weather protection – protects the converter in extreme weather conditions
- Diagnosis functions according to NAMUR NE 107
- NACE design MR 0175 (ISO 15156), MR 0103 (ISO 17945) / ASME B31.3
- SIL 2/3 (in preparation)
- ±2 mm /±0.08″ accuracy
- Real-time clock for event logging
- 3-year warranty
OPTIFLEX 1100
The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for
The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level transmitters.
Overview
The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level transmitters.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Three types of probes which can all be shortened on site
- Removal of the converter under process conditions and 360° rotation to make the display screen easier to read
- Display keypad buttons directly accessible without opening the housing cover
OPTIWAVE 7500
The OPTIWAVE 7500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding liquid applications involving narrow tanks with
The OPTIWAVE 7500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding liquid applications involving narrow tanks with long nozzles and internal obstructions like agitators or heating coils. Its very small beam angle and negligible dead zone make this FMCW radar the optimal choice for continuous, non-contact level measurement in both extremely small and very high tanks (up to 100 m / 328 ft). The level transmitter is even able to measure through tank roofs made of non-conductive materials. Its PEEK and PTFE Lens antennas are insensitive to deposits and well suited for corrosive environments. As the antennas are flush-mounted, there is no intrusion into the tank.
The OPTIWAVE 7500 provides accurate readings even in processes with fast changing levels. It can be used in operating temperatures of up to +200°C / +392°F and pressures up to 40 barg / 580 psig. This level transmitter offers a wide range of flange and thread connections (starting from ¾″). It comes with approvals for use in hazardous areas as well as extensive device diagnostics (acc. to NE 107) and HART®7 communication.
Overview
The OPTIWAVE 7500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding liquid applications involving narrow tanks with long nozzles and internal obstructions like agitators or heating coils. Its very small beam angle and negligible dead zone make this FMCW radar the optimal choice for continuous, non-contact level measurement in both extremely small and very high tanks (up to 100 m / 328 ft). The level transmitter is even able to measure through tank roofs made of non-conductive materials. Its PEEK and PTFE Lens antennas are insensitive to deposits and well suited for corrosive environments. As the antennas are flush-mounted, there is no intrusion into the tank.
The OPTIWAVE 7500 provides accurate readings even in processes with fast changing levels. It can be used in operating temperatures of up to +200°C / +392°F and pressures up to 40 barg / 580 psig. This level transmitter offers a wide range of flange and thread connections (starting from ¾″). It comes with approvals for use in hazardous areas as well as extensive device diagnostics (acc. to NE 107) and HART®7 communication.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- Flush-mounted PEEK or PTFE Lens antennas (no tank intrusion)
- Insensitive to deposit
- Small dead zone and beam angle (4° with DN70 / 2¾″ Lens antenna)
- PEEK or PTFE flange plate protections as well as a PEEK thread protection for corrosive media
- 112 mm / 4.4″ antenna extension for long nozzles
- Empty tank spectrum function eliminates false reflections caused by tank internals
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ±2 mm / ±0.08″ accuracy
- Large range of flange and thread connections
- Large, backlit LCD screen with 4-button keypad for operation with bar magnet; no need to open the housing cover
- PACTware™, HART® DD and DTM provided free of charge with full functionality
- Extensive device diagnostics acc. to NAMUR NE 107
- SIL 2/3 certified for safety-related applications
- 3-year warranty
OPTIWAVE-M 7500
The OPTIWAVE-M 7500 is a highly accurate and reliable 2-wire 80 GHz radar (FMCW) level transmitter for measuring ullage. Equipped with
The OPTIWAVE-M 7500 is a highly accurate and reliable 2-wire 80 GHz radar (FMCW) level transmitter for measuring ullage. Equipped with a heavy-duty stainless steel housing, this marine level radar is designed to withstand the roughest conditions on deck. Due to its flush-mounted PEEK Lens antenna with a very small beam angle, this FMCW radar is the optimal choice for continuous, non-contact level measurement involving narrow small or high tanks with internal obstructions. Insensitive to deposits or corrosive environments, this marine level transmitter is equally suited for oil or other liquids, slurries and pastes as well as solids.
The extremely rugged cargo radar features a backup display for redundant indication. Cargo operations may continue with a man on deck, if level information is lost on the main monitoring station. The OPTIWAVE-M 7500 level transmitter is part of the CARGOMASTER® solution for onboard tank monitoring and alarm. It holds IEC (Ex ia IIC) intrinsic safety certification as well as approvals of all major marine classification societies.
Overview
The OPTIWAVE-M 7500 is a highly accurate and reliable 2-wire 80 GHz radar (FMCW) level transmitter for measuring ullage. Equipped with a heavy-duty stainless steel housing, this marine level radar is designed to withstand the roughest conditions on deck. Due to its flush-mounted PEEK Lens antenna with a very small beam angle, this FMCW radar is the optimal choice for continuous, non-contact level measurement involving narrow small or high tanks with internal obstructions. Insensitive to deposits or corrosive environments, this marine level transmitter is equally suited for oil or other liquids, slurries and pastes as well as solids.
The extremely rugged cargo radar features a backup display for redundant indication. Cargo operations may continue with a man on deck, if level information is lost on the main monitoring station. The OPTIWAVE-M 7500 level transmitter is part of the CARGOMASTER® solution for onboard tank monitoring and alarm. It holds IEC (Ex ia IIC) intrinsic safety certification as well as approvals of all major marine classification societies.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Cargo radar level gauge designed to operate in the roughest marine conditions
- With rugged stainless steel (1.4404 / 316L) housing and display protection
- Redundant display: ullage/level will always be shown locally
- Inert gas pressure sensor (IGP) integral part of radar flange
- Flush-mounted PEEK Lens antenna (no tank intrusion):
- DN70 / 2¾″ with extremely focussed beam angle of only 4° for use in narrow tanks
- DN40 / 1½″ with narrow beam angle of 8° for small to large tanks
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- Accuracy: ±2 mm / 0.08″
- Optimised for use with the CARGOMASTER® solution for liquid cargo monitoring and alarm
OPTIWAVE 7400
The OPTIWAVE 7400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in harsh environments like tanks with
The OPTIWAVE 7400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in harsh environments like tanks with agitators containing corrosive media. It is particularly designed for continuous, non-contact level measurement under extreme conditions prevalent in the chemical, petrochemical, power, metal or oil and gas industry. The device features Metallic Horn antennas as well as PTFE and PEEK Drop antennas for measuring distances up to 100 m / 328 ft. The Drop antennas are perfectly suited for aggressive liquids in tanks. In applications with toxic and dangerous, this radar device can be equipped with a METAGLAS® second sealing barrier.
The OPTIWAVE 7400 provides accurate readings even in processes with fast changing levels. It has approvals for hazardous areas and can be used in process conditions of up to +200°C / +392°F and 100 barg / 1450 psig. There is also a dedicated version available for non-ex applications with molten salt or other high temperature liquids up to +700°C / +1292°F. The radar level transmitter comes with a quick coupling system, allowing the converter to be removed under process conditions and upgrade obsolete radars in high-end applications, e.g. to obtain extended device features. The OPTIWAVE 7400 features extensive device diagnostics (acc. to NE 107) as well as HART®7 communication.
Overview
The OPTIWAVE 7400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in harsh environments like tanks with agitators containing corrosive media. It is particularly designed for continuous, non-contact level measurement under extreme conditions prevalent in the chemical, petrochemical, power, metal or oil and gas industry. The device features Metallic Horn antennas as well as PTFE and PEEK Drop antennas for measuring distances up to 100 m / 328 ft. The Drop antennas are perfectly suited for aggressive liquids in tanks. In applications with toxic and dangerous, this radar device can be equipped with a METAGLAS® second sealing barrier.
The OPTIWAVE 7400 provides accurate readings even in processes with fast changing levels. It has approvals for hazardous areas and can be used in process conditions of up to +200°C / +392°F and 100 barg / 1450 psig. There is also a dedicated version available for non-ex applications with molten salt or other high temperature liquids up to +700°C / +1292°F. The radar level transmitter comes with a quick coupling system, allowing the converter to be removed under process conditions and upgrade obsolete radars in high-end applications, e.g. to obtain extended device features. The OPTIWAVE 7400 features extensive device diagnostics (acc. to NE 107) as well as HART®7 communication.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- Distance piece for non-ex applications with molten salt or other high temperature liquids of up to +700°C / +1292°F
- PTFE or PEEK Drop antennas:
- Insensitive to condensation
- Small beam angle (4° with DN150 / 6″ PTFE antenna)
- Ellipsoidal shape and smooth surface to minimise scaling
- PTFE flange plate protection for corrosive media
- New DN100 / 4″ Drop antenna for distances up to 80 m / 262.5 ft
- 316L Metallic Horn antennas with optional purging system
- Heating / cooling systems to prevent crystallisation or build-up in Metallic Horn antennas
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ±2 mm / ±0.08″ accuracy
- METAGLAS® second sealing barrier for toxic and dangerous liquids
- Antenna extensions to suit any nozzle length
- Empty tank spectrum function eliminates false reflections caused by tank internals
- Large choice of flange and thread connections
- Quick Coupling system permits removal of the converter under process conditions and 360° rotation for easy reading of display
- Converter compatible with all OPTIWAVE 7300 C flange connections
- Large, backlit LCD screen with 4-button keypad for operation with bar magnet; no need to open the housing cover
- PACTware™, HART® DD and DTM provided free of charge with full functionality
- Extensive device diagnostics acc. to NAMUR NE 107
- SIL 2/3 certified for safety-related applications
- 3-year warranty
OPTIWAVE-M 7400
The OPTIWAVE-M 7400 C is a 2-wire 24 GHz radar (FMCW) level transmitter for non-contact cargo level measurement. This marine
The OPTIWAVE-M 7400 C is a 2-wire 24 GHz radar (FMCW) level transmitter for non-contact cargo level measurement. This marine level radar is a highly accurate and reliable instrument for ullage indication. Equipped with heavy-duty stainless steel housing, it is designed to withstand the roughest conditions on ships. If necessary, the signal converter of the level transmitter can be replaced during cargo operations. The Drop antenna option makes it ideal for measuring sticky/contaminating liquids or dust-laden atmospheres where product build-up is likely to occur.
The extremely rugged cargo radar features a backup display for redundant indication. Cargo operations may continue with a man on deck, if level information is lost on the main monitoring station. The OPTIWAVE-M 7400 level transmitter is the perfect fit for applications with the CARGOMASTER® solution for onboard tank monitoring and alarm. It holds IEC (Ex IIC) intrinsic safety certification as well as approvals of all major marine classification societies.
Overview
The OPTIWAVE-M 7400 C is a 2-wire 24 GHz radar (FMCW) level transmitter for non-contact cargo level measurement. This marine level radar is a highly accurate and reliable instrument for ullage indication. Equipped with heavy-duty stainless steel housing, it is designed to withstand the roughest conditions on ships. If necessary, the signal converter of the level transmitter can be replaced during cargo operations. The Drop antenna option makes it ideal for measuring sticky/contaminating liquids or dust-laden atmospheres where product build-up is likely to occur.
The extremely rugged cargo radar features a backup display for redundant indication. Cargo operations may continue with a man on deck, if level information is lost on the main monitoring station. The OPTIWAVE-M 7400 level transmitter is the perfect fit for applications with the CARGOMASTER® solution for onboard tank monitoring and alarm. It holds IEC (Ex IIC) intrinsic safety certification as well as approvals of all major marine classification societies.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- Cargo radar level gauge designed to operate in the roughest marine conditions
- With rugged stainless steel (1.4404 / 316L) housing and display protection
- Redundant display: ullage/level will always be shown locally
- Inert gas pressure sensor (IGP) integral part of radar flange
- Antennas:
- Horn antenna (DN100 / 4″): Stainless steel (1.4404 / 316L) or higher Molybdenum (on request)
- Drop antenna (DN80 /3″ or DN100 /4″): PP or PTFE
- Horn antenna option comes with built-in antenna purging system for cleaning without opening the tank
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- Replacement of the signal converter can be done at any time, even during cargo operations without opening the tank
- Accuracy: ±2 mm / 0.1″ uncertainty
- Optimized for use with the CARGOMASTER solution for liquid cargo monitoring and alarm
OPTIWAVE 6500
The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty
The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty atmospheres. With its small beam angle, this radar is particularly suited for continuous, non-contact level measurement in high and narrow silos, hoppers or buffer storage containers up to 100 m / 328 ft. Due to specific algorithms and the high signal dynamics of the FMCW radar, the level transmitter is ideal for low-reflective media, dust, uneven surfaces or silos with internal obstructions. As it features flush-mounted PEEK and PTFE Lens antennas, there is no intrusion into the tank.
The OPTIWAVE 6500 provides accurate and reliable readings in process conditions with temperatures up to +200°C / +392°F and pressures up to 40 barg / 580 psig. It offers flange or thread connections as well as an optional 112 mm / 4.4″ antenna extension for the DN40 / 1.5″ antenna. Approvals for use in hazardous areas are also available. It comes with extensive device diagnostics (acc. to NE 107) and HART®7 communication.
Overview
The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty atmospheres. With its small beam angle, this radar is particularly suited for continuous, non-contact level measurement in high and narrow silos, hoppers or buffer storage containers up to 100 m / 328 ft. Due to specific algorithms and the high signal dynamics of the FMCW radar, the level transmitter is ideal for low-reflective media, dust, uneven surfaces or silos with internal obstructions. As it features flush-mounted PEEK and PTFE Lens antennas, there is no intrusion into the tank.
The OPTIWAVE 6500 provides accurate and reliable readings in process conditions with temperatures up to +200°C / +392°F and pressures up to 40 barg / 580 psig. It offers flange or thread connections as well as an optional 112 mm / 4.4″ antenna extension for the DN40 / 1.5″ antenna. Approvals for use in hazardous areas are also available. It comes with extensive device diagnostics (acc. to NE 107) and HART®7 communication.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- High dynamics for clear vision despite dusty atmospheres or low reflective media
- Empty tank spectrum function eliminates false reflections caused by tank internals
- Flush-mounted PEEK or PTFE Lens antennas (no tank intrusion):
- DN70 / 2¾″ with 4° beam angle for distances up to 100 m / 328 ft
- 112 mm / 4.4″ antenna extension for long nozzles
- Unaffected by angle of repose
- Purging system for antenna cleaning
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ±2 mm / ±0.08″ accuracy
- Large choice of flange and thread connections
- Low-cost 316L low-pressure flange discs
- Large, backlit LCD screen with 4-button keypad for operation with bar magnet; no need to open the housing cover
- PACTware™, HART® DD and DTM provided free of charge with full functionality
- Extensive device diagnostics acc. to NAMUR NE 107
- SIL 2/3 certified for safety-related applications
- 3-year warranty
OPTIWAVE 6400
The OPTIWAVE 6400 is a 2-wire 24 GHz radar (FMCW) level transmitter for basic applications with solids. This radar is
The OPTIWAVE 6400 is a 2-wire 24 GHz radar (FMCW) level transmitter for basic applications with solids. This radar is designed for continuous, non-contact level measurement of stones, plastic granulates, coffee beans and other in solids processing of various industries. The level transmitter features a Metallic Horn antenna as well as PP and PTFE Drop antennas. The Drop antenna design minimises scaling and is unaffected by the angle of repose. Hence no need for expensive antenna aiming kits or purging systems.
The OPTIWAVE 6400 provides accurate and reliable readings, despite uneven product surfaces or dusty atmospheres. Due to its small beam angle and high dynamic range, the 24 GHz radar can measure distances up to 100 m / 328 ft. This makes it a cost-effective, yet more powerful alternative to pulse radar transmitters. It comes with approvals for hazardous areas and can be used to upgrade radars in basic applications requiring higher accuracy. The radar transmitter offers a large range of flange and thread connections including low-cost disc flanges for low-pressure applications. Optional antenna extensions can be selected to suit any nozzle length. It features extensive device diagnostics (acc. to NE 107) and HART®7 communication.
Overview
The OPTIWAVE 6400 is a 2-wire 24 GHz radar (FMCW) level transmitter for basic applications with solids. This radar is designed for continuous, non-contact level measurement of stones, plastic granulates, coffee beans and other in solids processing of various industries. The level transmitter features a Metallic Horn antenna as well as PP and PTFE Drop antennas. The Drop antenna design minimises scaling and is unaffected by the angle of repose. Hence no need for expensive antenna aiming kits or purging systems.
The OPTIWAVE 6400 provides accurate and reliable readings, despite uneven product surfaces or dusty atmospheres. Due to its small beam angle and high dynamic range, the 24 GHz radar can measure distances up to 100 m / 328 ft. This makes it a cost-effective, yet more powerful alternative to pulse radar transmitters. It comes with approvals for hazardous areas and can be used to upgrade radars in basic applications requiring higher accuracy. The radar transmitter offers a large range of flange and thread connections including low-cost disc flanges for low-pressure applications. Optional antenna extensions can be selected to suit any nozzle length. It features extensive device diagnostics (acc. to NE 107) and HART®7 communication.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- Built-in configurations for different surface profiles
- PP or PTFE Drop antennas:
- Insensitive to product build-up
- Small beam angle (4° with DN150 /6″ PTFE Drop antenna)
- Ellipsoidal shape and smooth surface to prevent scaling
- Unaffected by angle of repose – no need for antenna aiming kits
- New DN100 / 4″ for distances up to 40 m / 131.2 ft
- 316L Metallic Horn antenna with optional purging system
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ±2 mm / ±0.08″ accuracy
- Spare converter compatible with all OPTIWAVE 6300 C process connections
- Low-cost 316L low-pressure flange discs
- Antenna extensions to suit any nozzle length
- Large choice of flange and thread connections
- Large, backlit LCD screen with 4-button keypad for operation with bar magnet; no need to open the housing cover
- PACTware™, HART® DD and DTM provided free of charge with full functionality
- SIL 2/3 certified for safety-related applications
- 3-year warranty
OPTIWAVE 5400
The OPTIWAVE 5400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in basic process applications. It is
The OPTIWAVE 5400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in basic process applications. It is particularly designed for continuous, non-contact level measurement in the chemical, petrochemical, power as well as oil and gas industry. It can be equipped with a PP Drop antenna for condensing atmospheres and corrosive media but features also Metallic Horn antennas. Due to its high dynamic range, the 24 GHz radar can measure distances up to 100 m / 328 ft.
The OPTIWAVE 5400 provides accurate readings even in processes with fast changing levels, in closed tanks or in the open air (dams, rivers etc.). This level transmitter can replace radars in basic applications requiring higher accuracy. It offers flange or thread connections as well as optional antenna extensions to suit any nozzle length. It is approved for hazardous areas and comes with extensive device diagnostics (acc. to NE 107) as well as HART®7 communication.
Overview
The OPTIWAVE 5400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in basic process applications. It is particularly designed for continuous, non-contact level measurement in the chemical, petrochemical, power as well as oil and gas industry. It can be equipped with a PP Drop antenna for condensing atmospheres and corrosive media but features also Metallic Horn antennas. Due to its high dynamic range, the 24 GHz radar can measure distances up to 100 m / 328 ft.
The OPTIWAVE 5400 provides accurate readings even in processes with fast changing levels, in closed tanks or in the open air (dams, rivers etc.). This level transmitter can replace radars in basic applications requiring higher accuracy. It offers flange or thread connections as well as optional antenna extensions to suit any nozzle length. It is approved for hazardous areas and comes with extensive device diagnostics (acc. to NE 107) as well as HART®7 communication.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- PP Drop antenna:
- Insensitive to condensation
- Small beam angle (5° with DN150 / 6″ Drop antenna)
- Ellipsoidal shape and smooth surface to minimise scaling
- PP flange plate protection and cladded antenna extensions for corrosive media
- New DN100 / 4″ Drop antenna for distances up to 80 m / 262.5 ft
- 316L Metallic Horn antenna with optional purging system
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ±2 mm / ±0.08″ accuracy
- Antenna extensions to suit any nozzle
length - Empty tank spectrum function eliminates false reflections caused by tank internals
- Large choice of flange and thread connections
- Large, backlit LCD screen with 4-button keypad for operation with bar magnet; no need to open the housing cover
- PACTware™, HART® DD and DTM provided free of charge with full functionality
- Extensive device diagnostics acc. to NAMUR NE 107
- SIL 2/3 certified for safety-related applications
- 3-year warranty
OPTIWAVE 3500
The OPTIWAVE 3500 is a 2-wire 80 GHz radar (FMCW) level transmitter for liquids in hygienic applications. It is designed
The OPTIWAVE 3500 is a 2-wire 80 GHz radar (FMCW) level transmitter for liquids in hygienic applications. It is designed for continuous, non-contact level measurement in the food and beverage as well as pharmaceutical industry. The device features a flush-mounted PEEK Lens antenna with a small beam angle and dead zone for precise measurement even in small and narrow tanks with agitators. It is equally suited for use on larger tanks, measuring distances of up to 50 m / 164 ft.
The OPTIWAVE 3500 fits applications with any finished or raw product – from raw milk, wine or juice to solvents. As the radar withstands process temperatures up to +150°C / +302°F and pressures up to 25 barg / 362 psig, it can be used in CIP/SIP cleaning operations. The OPTIWAVE 3500 offers a large choice of hygienic process connections. It comes with extensive device diagnostics (acc. to NE 107) as well as HART®7 communication.
Overview
The OPTIWAVE 3500 is a 2-wire 80 GHz radar (FMCW) level transmitter for liquids in hygienic applications. It is designed for continuous, non-contact level measurement in the food and beverage as well as pharmaceutical industry. The device features a flush-mounted PEEK Lens antenna with a small beam angle and dead zone for precise measurement even in small and narrow tanks with agitators. It is equally suited for use on larger tanks, measuring distances of up to 50 m / 164 ft.
The OPTIWAVE 3500 fits applications with any finished or raw product – from raw milk, wine or juice to solvents. As the radar withstands process temperatures up to +150°C / +302°F and pressures up to 25 barg / 362 psig, it can be used in CIP/SIP cleaning operations. The OPTIWAVE 3500 offers a large choice of hygienic process connections. It comes with extensive device diagnostics (acc. to NE 107) as well as HART®7 communication.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- Flush-mounted PEEK Lens antenna (no tank intrusion)
- Small dead zone and beam angle (8° with DN40 / 1½″)
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ± 2 mm / ±0.08” accuracy
- Empty tank spectrum function eliminates false reflections caused by tank internals
- Suitable for SIP (Sterilisation In Place) and CIP (Cleaning In Place)
- Large choice of hygienic process connections
- Large, backlit LCD screen with 4-button keypad for operation with bar magnet; no need to open the housing cover
- PACTware™, HART® DD and DTM provided free of charge with full functionality
- Extensive device diagnostics acc. to NAMUR NE 107
- Conform to FDA, EC1935/2004, EC2023/2006, EU 10/2011 and EHEDG
- SIL 2/3 certified for safety-related applications
- 3-year warranty
OPTIWAVE 1400
The OPTIWAVE 1400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in water and wastewater applications. It is
The OPTIWAVE 1400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in water and wastewater applications. It is equally suited for continuous, non-contact level measurement of water from springs, rivers, lakes or the sea as well as rainwater, wastewater, sludge or other liquids in storage applications. The device features a robust 316L stainless steel housing and comes IP68 / NEMA 4X/6 rated for use in open air installations prone to flooding.
Its proven PP (polypropylene) Drop antenna, with the smallest beam angle (8°) on the market, guarantees accurate and reliable level measurement of liquids despite condensation, turbulent surfaces or foam. This makes it a more powerful, yet cost-effective alternative to pulse radar and ultrasonic level transmitters. The level radar offers thread as well as low-pressure flange connections and various other accessories.
Overview
The OPTIWAVE 1400 is a 2-wire 24 GHz radar (FMCW) level transmitter for liquids in water and wastewater applications. It is equally suited for continuous, non-contact level measurement of water from springs, rivers, lakes or the sea as well as rainwater, wastewater, sludge or other liquids in storage applications. The device features a robust 316L stainless steel housing and comes IP68 / NEMA 4X/6 rated for use in open air installations prone to flooding.
Its proven PP (polypropylene) Drop antenna, with the smallest beam angle (8°) on the market, guarantees accurate and reliable level measurement of liquids despite condensation, turbulent surfaces or foam. This makes it a more powerful, yet cost-effective alternative to pulse radar and ultrasonic level transmitters. The level radar offers thread as well as low-pressure flange connections and various other accessories.
Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.
- 2-wire, loop-powered, with HART®7
- FMCW technology for greater resolution, just like the new 80 GHz generation
- Proven PP Drop antenna, insensitive to condensation or deposits
- Narrow beam angle (8°) for a sharp focus on the medium
- TBM (Tank Bottom Management) ensures reliable measurement even in empty tanks:
- dedicated algorithms to filter and compensate for irregular radar wave reflections that occur at tank bottom when the vessel is empty
- allows for quick and easy commissioning of tanks regardless of their size, material or geometry
- ±2 mm / ±0.08″ accuracy
- Maintenance-free concept
- Installation and operation made simple, safe and secure
- Extensive choice of accessories
- PACTware™ HART® DD and DTM provided free of charge with full functionality
- 3-year warranty
OPTISWIRL 2000
The OPTISWIRL 2000 is a Vortex flow sensor. Combined with the VFC 100 signal converter it forms the OPTISWIRL 2100 Vortex flowmeter
The OPTISWIRL 2000 is a Vortex flow sensor. Combined with the VFC 100 signal converter it forms the OPTISWIRL 2100 Vortex flowmeter for basic utility applications.
Overview
The OPTISWIRL 2000 is a Vortex flow sensor. Combined with the VFC 100 signal converter it forms the OPTISWIRL 2100 Vortex flowmeter for basic utility applications.