Raman Rxn5 process analyzer
Turn-key process Raman analyzer for quantitative chemical composition measurements
- F
- L
- E
- X
Raman Rxn5 analyzer
-
Measuring principle
Raman spectroscopy
-
Spectral coverage
150-3425 cm-1 (532 nm)
-
Spectral resolution
5 cm-1 (532 nm)
-
Channels
Up to four channels
-
Temperature
Operating:
-20 to 50 °C / -4 to 122 °F
Recommended storage:
-30 to 60 °C / -22 to 140 °F -
Relative humidity
0 to 90 %, non-condensing
-
Input voltage
90-264 VAC, 47-63 Hz standard
-
Power consumption (W)
<300 (max)
<300 (typical start-up)
<200 (typical running) -
Warm up time (minutes)
120
-
Unit dimensions (width x height x depth)
457 x 834 x 254 mm
18.00 x 32.84 x 10.00 inch -
Weight
61.2 kg / 135 lbs
-
Sampling probe compatibility
Raman Rxn-30
-
Automation interface
Modbus (TCP/IP or RS485)
-
Installation options
IP 56 wall-mounted, sealed/purged enclosure
-
Hazardous area certifications
ATEX, CSA, IECEx
Field of application
The Raman Rxn5 process analyzer is an industry-leading, turn-key, laser-based analyzer powered by Kaiser Raman technology. It provides quantitative chemical composition measurements using Raman spectroscopy. The design of the Raman Rxn5 incorporates customer requirements for serviceability and hazard-area certification, provides a compact footprint, and minimizes utilities consumption. The high optical efficiency of the analyzer makes it ideal for typical gas-phase sample measurements.
Process measurement points:Steam methane reformersGasifiers (coal, petcoke, waste, biomass)Shift convertersHydrotreatersHydrocrackersCO2 removalFinished product synthesis loopsTypical industries:Hydrogen production/purity, HyCO, Hydrogen recycle, Methanol productionAmmonia productionGas turbine fuel feedSynthetic natural gal/IGCC power plantsLNG baseload customer transfer, LNG rundown to storage tanks, LNG mixed refrigerant optimization
Benefits
Non-destructive analysis of gases, including homonuclear diatomics (H2, N2, O2)Compact, smaller than most wall-mount gas chromatographs (GCs)Can replace up to four traditional analyzers with a single base unit and four probesRugged with minimal utility requirements, no sample transport, and no consumables (columns, valves, gases, pumps)Minimal analyzer technician time with maximum technician safety (no toxic gases are transported to the analyzer)Measures four streams simultaneously for faster multi-channel results-20 to +50 °C operating environment
Raman Rxn4 analyzer
Rugged, reliable Raman analyzer ensuring 24/7 process and quality monitoring
- F
- L
- E
- X
Raman Rxn4 analyzer, front left angle view
-
Measuring principle
Raman spectroscopy
-
Spectral coverage
Base Model and Enclosure configuration:
150-4350 cm-1 (532 nm)
150-3425 cm-1 (785 nm)
200-2400 cm-1 (1000 nm)
Hybrid: 175-1890 cm-1 (785 nm) -
Spectral resolution
Base model and Enclosure configuration (average):
5 cm-1 (532 nm)
4 cm-1 (785 nm)
5 cm-1 (1000 nm)
Hybrid:
4 cm-1 (785 nm) average -
Channels
Base model and Enclosure configuration:
Up to four channels
Hybrid:
Up to two channels -
Temperature
Base model:
Operating:
5 to 35 °C / 41 to 95 °F (532 nm, 785 nm)
5 to 30 °C / 41 to 86 °F (1000 nm)
Storage:
-15 to 50 °C / 5 to 122 °F
Hybrid:
Operating: 5 to 35 °C / 41 to 95 °F
Storage: -15 to 50 °C / 5 to 122 °F
Enclosure configuration:
Operating: (all wavelengths)
5 to 50 °C / 41 to 122 °F
Storage:
-15 to 50 °C / 5 to 122 °F -
Relative humidity
20 to 80 %, non-condensing
-
Input voltage
Base model and Hybrid:
100-240 V, 50-60 Hz, ±10%
Enclosure configuration:
120 V ±10%, 60 Hz -OR-
230 V ±10%, 50/60 Hz -
Power consumption (W)
Base model and Hybrid:
400 (max)
250 (typical start-up)
120 (typical running)
Enclosure configuration:
1560 (max)
1560 (typical start-up)
750 (typical running) -
Warm up time (minutes)
Base model and Hybrid:
120
Enclosure configuration:
240 -
Unit dimensions (width x height x depth)
Base model and Hybrid:
483 x 267 x 556 mm
19.02 x 10.52 x 21.89 inch
Enclosure configuration: (with optional trolley)
1175 x 1480 x 826 mm
46.26 x 58.27 x 32.52 inch -
Weight
Base model:
28.5 kg / 63 lbs
Enclosure configuration:
185.5 kg / 409 lbs (with optional trolley) -
Sampling probe compatibility
Base model and enclosure configuration:
Raman Rxn-10 (with accessory optics), Rxn-40, Rxn-41, Rxn-45, Rxn-46
Hybrid:
Channel 1 – Raman Rxn-20 (with accessory optics)
Channel 2 – Raman Rxn-10 (with accessory optics), Rxn-40, Rxn-41, Rxn-45, Rxn-46 -
Automation interface
OPC
Modbus
HTTPS
(contact us for other options) -
Installation options
Base model and Hybrid:
19-inch rack package
Enclosure configuration:
NEMA 4X enclosure; wall-mountable, moblile trolley, or fixed stand -
Hazardous area certifications
Base model and Hybrid:
ATEX, CSA, IECEx
Enclosure configuration:
Call support for options
-
Measuring principle
Raman spectroscopy
-
Spectral coverage
Base Model and Enclosure configuration:
150-4350 cm-1 (532 nm)
150-3425 cm-1 (785 nm)
200-2400 cm-1 (1000 nm)
Hybrid: 175-1890 cm-1 (785 nm) -
Spectral resolution
Base model and Enclosure configuration (average):
5 cm-1 (532 nm)
4 cm-1 (785 nm)
5 cm-1 (1000 nm)
Hybrid:
4 cm-1 (785 nm) average -
Channels
Base model and Enclosure configuration:
Up to four channels
Hybrid:
Up to two channels -
Temperature
Base model:
Operating:
5 to 35 °C / 41 to 95 °F (532 nm, 785 nm)
5 to 30 °C / 41 to 86 °F (1000 nm)
Storage:
-15 to 50 °C / 5 to 122 °F
Hybrid:
Operating: 5 to 35 °C / 41 to 95 °F
Storage: -15 to 50 °C / 5 to 122 °F
Enclosure configuration:
Operating: (all wavelengths)
5 to 50 °C / 41 to 122 °F
Storage:
-15 to 50 °C / 5 to 122 °F -
Relative humidity
20 to 80 %, non-condensing
-
Input voltage
Base model and Hybrid:
100-240 V, 50-60 Hz, ±10%
Enclosure configuration:
120 V ±10%, 60 Hz -OR-
230 V ±10%, 50/60 Hz
Micropilot FWR30 – The cloud connected radar level sensor
From smart level monitoring to supply chain management
- F
- L
- E
- X
-
Measuring principle
Level radar
-
Characteristic / Application
Applications in all industries
Mobile and stationary storage tanks -
Specialities
Commissioning and operation via digital services like “Netilion Value” or “SupplyCare Hosting”
-
Supply / Communication
Battery powered
Mobile connectivity with NB-IoT, LTE-M or 2G (fallback) -
Frequency
80 GHz
-
Accuracy
±10 mm (0.39 in)
-
Process temperature
-20°C…+60°C (-4°F…+140°F)
-
Main wetted parts
Housing: plastic PBT/ PC
-
Process connection
None
-
Max. measurement distance
15 m (49 ft)
-
Communication
Wireless
Mobile connectivity with NB-IoT, LTE-M or 2G (fallback) -
Options
Mounting bracket IBC/ pipe
Mounting bracket wall/ ceiling -
Application limits
DK <1.9
Metallized plastic tanks
-
Measuring principle
Level radar solid
-
Characteristic / Application
Applications in all industries
Mobile and stationary plastic and metal tanks (IBC tanks, storage silos)
Reliable non-contact level measurement of solids in metal- and plastic containers -
Specialities
Commissioning and operation via digital services like “Netilion Value”, “Netilion Inventory” or “SupplyCare Hosting”
-
Supply / Communication
Battery powered
Mobile connectivity with NB-IoT, LTE-M or
2G (fallback) -
Frequency
80 GHz
-
Accuracy
±10 mm (0.39 in)
-
Process temperature
-20°C…+60°C (-4°F…+140°F)
-
Main wetted parts
Housing: plastic PBT/ PC
-
Process connection
Threads:
G 1 1/2″, NPT 1 1/2″ -
Max. measurement distance
15 m (49 ft)
-
Communication
Wireless
Mobile connectivity with NB-IoT, LTE-M or
2G (fallback) -
Options
Mounting bracket IBC/ pipe
Mounting bracket wall/ ceiling -
Conductive Point level detection Liquipoint FTW33
Very compact flush-mounted probe for liquid and pasty media
- F
- L
- E
- X
-
Measuring principle
Conductive
-
Characteristic / Application
Compact point level switch for using in pipes and in storage, mixing and process vessels with or without an agitator, for water based or oil based media, with active build up compensation,flush mounting
-
Specialities
CIP and SIP suitable
Conductive foam is detectable or can be switched off -
Supply / Communication
10…30 V DC
-
Ambient temperature
-40 … 70°C
(-40 … 158°F) -
Process temperature
Standard:
-20 … 100°C
Cleaning:
-20 … 150°C for 1h
( -4 … 302°F for 1h) -
Process pressure / max. overpressure limit
Vacuum … 25 bar
(Vacuum … 362,5 psi) -
Main wetted parts
Sensor: 316L
Sensor isolation: PEEK -
Process connection
Thread G1, G1/2, G3/4, M24
-
Process connection hygienic
Clamp ISO 2852 1 to 1 1/2″, 2″,
DIN11851 Pipe union -
Communication
DC PNP
Capacitance Point level detection Liquipoint FTW23
Cost effective point level switch for water-based liquids
- F
- L
- E
- X
-
Measuring principle
Capacitive Liquid
-
Characteristic / Application
Compact point level switch for using in water based liquids
-
Specialities
CIP and SIP suitable
-
Supply / Communication
10…30 V DC
-
Ambient temperature
-20…70°C
-4… 158°F -
Process temperature
Standard:
-20 … 100°C
Cleaning:
-20 … 135°C for 1h
-4 … 275F for 1h -
Process pressure / max. overpressure limit
Vacuum … 16 bar
Vacuum ….232 psi -
Main wetted parts
Sensor: 316L
Sensor isolation: PEEK -
Process connection
Thread G1, G1/2, G3/4, M24
-
Communication
DC PNP
IO- Link -
Certificates / Approvals
CSA C/US
-
Design approvals
EN 10204-3.1
-
Hygienic approvals
3A, EHEDG
-
Options
Weld-in adapter,
Process adapter for hygienic process connections -
Application limits
Conductive foam is recognizes as a liquid
Field of application
The Liquipoint FTW23 is developed and built for the food industry and meets all international hygiene requirements. The device also fits perfectly for industrial applications in all industries. It is intended for use in applications in liquid media without build-up. The IO-Link capability allows easy parameter setting.
For use in storage tanks, mixing vessels and pipes. For water-based liquids; Ex works for media with dielectric constant > 20, with adjustment via IO-Link for media with dielectric constant > 1.5 discernible.
Process connections: Threads
Temperature: -20 to +100°C (-4 to +212°F), CIP/SIP to 135°C (275°F) for 1 hour
Pressure: -1 to 16bar abs (-14.5 to 232psi)
Hygienic certificates
Benefits
Easy installation thanks to compact design, even in tight conditions or where access is restricted IO-Link reduces costs and complexity due to easy configuration of the devices via engineering toolsCIP and SIP cleanability ensured – up to protection class IP 69Individual adjustment to each medium not necessaryLED display for on-site function check
Vibronic Point level detection Soliphant FTM52
Robust point level switch with rope extension for fine-grained bulk solids also for hazardous areas
- F
- L
- E
- X
-
Measuring principle
Vibration Solids
-
Characteristic / Application
Point level switch for fine grained solids and powder
Grain size: <= 10 mm (<= 0.39 in)
Fork sensor
No calibration required
Not affected by build-up or external vibration
Robust
Switch value visible from outside
Rope extension -
Specialities
Build-up and corrosion detection
Remote version
3 temperature versions available
SIL 2 -
Supply / Communication
10-55V DC PNP 3-wire
19-253V AC 2-wire
19…253V AC / 19…55V DC 2 relay contact
8/16mA
NAMUR
PFM -
Ambient temperature
-50°C … 70°C
(-60°F … 160°F) -
Process temperature
-40°C …80 °C
(-40°F … 170°F) -
Process pressure / max. overpressure limit
Vacuum … 2 bar
(Vacuum … 30 psi)
max. 6 bar / 80 psi for EExd/EExde -
Min. density of medium
Standard fork: 10 g/l
Short fork: 50 g/l -
Main wetted parts
Sensor selectable:316L 3,2um
316L 0,8um
316L PTFE coated (to avoid build-up)
Rope: PUR, Silicon -
Max. tensile strength
3000 N
-
Process connection
Thread
R 1 1/2″
1 1/4″ NPT
1 1/2″ NPT
EN Flange DN50…DN100
ASME Flange 2″…4″
JIS Flange 50A…100A -
Process connection hygienic
Tri-Clamp ISO2852
-
Sensor length
750….20000mm
(30…800″) -
Communication
DC PNP 2-wire
AC Thyristor
DPDT relay
8/16mA
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA, CSA C/US, IEC Ex, JPN, INMETRO, NEPSI, EAC
-
Safety approvals
SIL
-
Options
Glass cover
Temperature spacerEN10204-3.1 -
Components
PFM: FTL325P, FTL375P
NAMUR: FTL325N, FTL375N
Field of application
Soliphant FTM52 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.
Point level switch for fine grained solids and powder.
Process connections: Threads, flanges and hygienic connection (Tri-Clamp)
Temperature: -40 to +80°C (-40 to +170°F)
Pressure: -1 to +2bar (-14.5 to +30psi)
Sensor length: 750mm to 20,000mm
Sensor material: 316L (3,2µm, 0,8µm, PTFE coated)
International explosion protection certificates
Benefits
SIL2 in accordance with IEC 61508No mechanically moved parts, free of maintenanceMeasurement not affected by build-up or external vibrationVarious electronic inserts: e.g. NAMUR, relay, thyristor and PFM-signal outputs for optimum alignment with the plant control systemBuild-up and abrasion display selectable, density setting and switching delay selectableChoice of coated or polished sensorBuild-up and corrosion detection
Vibronic Point level detection Soliphant FTM51
Robust point level switch with extension tube for fine-grained bulk solids also for hazardous areas
- F
- L
- E
- X
-
Measuring principle
Vibration Solids
-
Characteristic / Application
Point level switch for fine grained solids and powder
Grain size: <= 10 mm (<= 0.39 in)
Fork sensor
No calibration required
Not affected by build-up or external vibration
Robust
Switch value visible from outside
Tube extension -
Specialities
Build-up and corrosion detection
Remote version
3 temperature versions available
SIL 2 -
Supply / Communication
DC PNP 3-wire
AC 2-wire
19…253V AC / 19V…55V DC 2 relay contact
8/16mA
NAMUR
PFM -
Ambient temperature
-50°C … 70°C
(-60°F … 160 °F) -
Process temperature
-50°C … 280°C
(-60 °F … 540°F) -
Process pressure / max. overpressure limit
Vacuum … 25 bar
(Vacuum … 360 psi) -
Min. density of medium
Standard fork: 10 g/l
Short fork: 50 g/l -
Main wetted parts
selectable:
316L 3,2 µm
316L 0,8 µm
316L PTFE coated (to avoid build-up)
316L ETFE coated (to avoid corrosion) -
Process connection
Thread
R 1 1/2″
1 1/4″ NPT
1 1/2″ NPT
EN Flange DN50…DN100
ASME Flange 2″…4″
JIS Flange 50A…100A -
Process connection hygienic
Tri-Clamp ISO2852
-
Sensor length
300 … 4000mm
(12 … 155″)
(6000mm / 230″ on request) -
Communication
DC PNP 2-wire
AC Thyristor
DPDT relay
8/16mA
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA, CSA C/US, IEC Ex, JPN, INMETRO, NEPSI, EAC
-
Safety approvals
SIL
-
Design approvals
EN 10204-3.1
-
Options
Glass cover
Temperature spacer
EN10204-3.1 -
Components
PFM: FTL325P, FTL375P
NAMUR: FTL325N, FTL375N
Field of application
Soliphant FTM51 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.
Point level switch for fine grained solids and powder.
Process connections: Threads, flanges and hygienic connection (Tri-Clamp)
Temperature: -50 to +280°C (-60 to +540°F)
Pressure: -1 to +25bar (-14.5 to +360psi)
Sensor length: 300mm to 4,000mm
Sensor material: 316L (3,2µm, 0,8 µm, PTFE coated, ETFE coated)
International explosion protection certificates
Benefits
SIL2 in accordance with IEC 61508No mechanically moved parts, free of maintenanceMeasurement not affected by build-up or external vibrationVarious electronic inserts: e.g. NAMUR, relay, thyristor and PFM-signal outputs for optimum alignment with the plant control systemBuild-up and abrasion display selectable, density setting and switching delay selectableChoice of coated or polished sensorBuild-up and corrosion detection
Vibronic Point level detection Soliphant FTM50
Robust point level switch for fine-grained bulk solids also for hazardous areas
- F
- L
- E
- X
-
Measuring principle
Vibration Solids
-
Characteristic / Application
Compact point level switch for fine grained solids and powder
Grain size <= 10 mm (<= 0.39 in)
Fork sensor
No calibration required
Not affected by build-up or external vibration
Robust
Switch value visible from outside -
Specialities
Build-up and corrosion detection
Remote version
3 temperature versions available
SIL 2 -
Supply / Communication
10-55V DC PNP 3-wire
19-253V AC 2-wire
19…253V AC / 19V…55V DC 2 relay contact
8/16mA
NAMUR
PFM -
Ambient temperature
-50°C … 70°C
(-60°F … 160 °F) -
Process temperature
-50°C … 280°C
(-60°F … 540°F) -
Process pressure / max. overpressure limit
Vacuum … 25 bar
(Vacuum … 360 psi) -
Min. density of medium
Standard fork: 10 g/l
Short fork: 50 g/l -
Main wetted parts
selectable:
316L 3,2um
316L 0,8um
316L PTFE coated (to avoid build-up)
316L ETFE coated (to avoid corrosion) -
Process connection
Thread
R 1 1/2″
1 1/4″ NPT
1 1/2″ NPT
EN Flange DN50…DN100
ASME Flange 2″…4″
JIS Flange 50A…100A -
Process connection hygienic
Tri-Clamp ISO2852
-
Sensor length
Standard: 200mm (8″)
Short: 145mm (5.7″) -
Communication
DC PNP 2-wire
AC Thyristor
DPDT relay
8/16mA
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA, CSA C/US, IEC Ex, JPN, INMETRO, NEPSI, EAC
-
Safety approvals
SIL
-
Design approvals
EN 10204-3.1
-
Options
Glass cover
Temperature spacer
EN10204-3.1 -
Components
PFM: FTL325P, FTL375P
NAMUR: FTL325N, FTL375N
Field of application
Soliphant FTM50 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.
Point level switch for fine grained solids and powder.
Process connections: Threads, flanges and hygienic connection (Tri-Clamp)
Temperature: -50 to +280°C (-60 to +540°F)
Pressure: -1 to +25bar (-14.5 to +360psi)
Sensor length: 145mm, 200mm
Sensor material: 316L (3,2µm, 0,8µm, PTFE coated, ETFE coated)
International explosion protection certificates
Benefits
SIL2 in accordance with IEC 61508No mechanically moved parts, free of maintenanceMeasurement not affected by build-up or external vibrationVarious electronic inserts: e.g. NAMUR, relay, thyristor and PFM-signal outputs for optimum alignment with the plant control systemBuild-up and abrasion display selectable, density setting and switching delay selectableChoice of coated or polished sensorBuild-up and corrosion detection
Vibronic Point level detection Liquiphant FTL85
Coated point level switch for liquids for FailSafe overfill protection
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Coated point level switch for MIN and MAX safety applications up to SIL3,
Dual Sealing/ Second line of defense,
Modular housing concept -
Specialities
Outstanding features:
– permanent LIVE signal monitors function safety
– failsafe design and
– high availability of the measuring values -
Supply / Communication
2-wire 4…20 mA
-
Ambient temperature
-50°C…+70°C
(-58°F…+160°F) -
Process temperature
–50°C…+150°C
(–58°F…+300°F) -
Process pressure / max. overpressure limit
Vacuum…40 bar
(580 psi) -
Min. density of medium
Density from 0.4 g/cm3
(0.4 SGU) -
Main wetted parts
With high corrosion-resistant coating made of enamel, ECTFE and various PFA materials
-
Process connection
Flange:
DN25…DN100,
ASME 1″…4″,
JIS 10K…20K -
Sensor length
Extension pipe up to 3 m (9.8 ft)
-
Communication
2-wire 4…20 mA
-
Certificates / Approvals
ATEX, FM, CSA, CSA C/US, IEC Ex, NEPSI, EAC
-
Safety approvals
Overfill protection WHG
Leakage Detection
SIL3 -
Options
AlloyC Material
PWIS free
Pressure tight feed through
Weather protection -
Components
Nivotester FTL825, Transmitter
Field of application
Liquiphant FTL85 is a coated point level switch for use in hazardous areas with all international certificates. FailSafe overfill protection in applications with functional safety up to SIL3 with one device. With high corrosion-resistant coating made of enamel, ECTFE and various PFA materials. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.
Point level switch for liquids up to SIL3.Process connections: Threads and flangesTemperature: -50 to +150°C (-76 to +300°F)Pressure: -1 to +40bar (-14.5 to +580psi)Sensor length: Extension pipe up to 3m (9.8ft)Sensor material: Enamel, ECTFE and various PFA materialsInternational explosion protection certificates, overfill protection WHG, SIL
Benefits
Use in safety systems requiring functional safety to SIL3 in accordance with IEC 61508 Ed.2.0/ IEC 61511-1/ISA 84-1 and DIN EN ISO 13849Proof test: proof testing interval up to 12 years, Slave devices tested at the press of a button Permanent self-monitoring/internal redundancy4-20mA interface (acc. to NAMUR NE 06/NE 43): easy integration via the switching unit (Nivotester FailSafe FTL825) with a two-channel output (safety contacts) and locking function or direct integration into a safety PLCNo adjustment: quick, low-cost startupNo mechanically moving parts: no maintenance, no wear, long operating lifeMonitoring of fork for damage, corrosion, buildup and mechanical blocking
Vibronic Point level detection Liquiphant FTL81
Point level switch for liquids for FailSafe overfill protection
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Reliable point level switch with extension pipe for MIN and MAX safety applications up to SIL3.
Dual Sealing / Second line of defense
Modular housing concept -
Specialities
Outstanding features:
– permanent LIVE signal
monitors function safety
– failsafe design and
– high availability of the measuring values -
Supply / Communication
2-wire 4…20 mA
-
Ambient temperature
-60°C…+70°C
(-76°F…+160°F) -
Process temperature
-60°C…+280°C
(-76°F…+540°F) -
Process pressure / max. overpressure limit
Vacuum…100 bar
(1450 psi) -
Min. density of medium
Density from 0.4 g/cm3
(0.4 SGU) -
Main wetted parts
316L
Alloy C -
Process connection
Flange:
DN25…DN100,
ASME 1″…4″,
JIS 10K…20K
Thread:
G3/4, G1, R3/4,
R1, MNPT3/4, MNPT1 -
Sensor length
Extension pipe up to 3 m (9.8 ft)
-
Communication
2-wire 4…20 mA
-
Certificates / Approvals
ATEX, FM, CSA, CSA C/US, IEC Ex, NEPSI, EAC
-
Safety approvals
Overfill protection WHG
Leakage Detection
SIL3 -
Design approvals
EN 10204-3.1
NACE MR0175, MR0103
ASME B31.3
AD2000 -
Marine approval
GL/ ABS/ LR/ BV/ DNV
-
Options
PWIS free
Pressure tight feed through
Weather protection -
Components
Nivotester FTL825, Transmitter
Field of application
Liquiphant FTL81 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill protection in applications with functional safety up to SIL3 with one device. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.
Point level switch for liquids up to SIL3.Process connections: Threads and flangesTemperature: -60 to +280°C (-76 to +540°F)Pressure: -1 to +100bar (-14.5 to +1,450psi)Sensor length: Extension pipe up to 3m (9.8ft)Sensor material: 316L, Alloy CInternational explosion protection certificates, overfill protection WHG, SIL, marine approvals
Benefits
Use in safety systems requiring functional safety to SIL3 in accordance with IEC 61508 Ed.2.0/ IEC 61511-1/ISA 84-1 and DIN EN ISO 13849Proof test: proof testing interval up to 12 years, Slave devices tested at the press of a buttonPermanent self-monitoring/internal redundancy4-20mA interface (acc. to NAMUR NE 06/NE 43): easy integration via the switching unit (Nivotester FailSafe FTL825) with a two-channel output (safety contacts) and locking function or direct integration into a safety PLCNo adjustment: quick, low-cost startupNo mechanically moving parts: no maintenance, no wear, long operating lifeMonitoring of fork for damage, corrosion, build-up and mechanical blocking
Vibronic Point level detection Liquiphant FTL80
Point level switch for liquids for FailSafe overfill protection
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Compact point level switch for MIN and MAX safety applications up to SIL3,
Dual Sealing/ Second line of defense
Modular housing concept -
Specialities
Outstanding features:
– permanent LIVE signal monitors function safety
– failsafe design and
– high availability of the measuring values -
Supply / Communication
2-wire 4…20 mA
-
Ambient temperature
-60°C…+70°C
(-76°F…+160°F) -
Process temperature
-60°C…+280°C
(-76°F…+540°F) -
Process pressure / max. overpressure limit
Vacuum…100 bar
(1450 psi) -
Min. density of medium
Density from 0.4 g/cm3
(0.4 SGU) -
Main wetted parts
316L,
Alloy C -
Process connection
Flange:
DN25…DN100
ASME 1″…4″
JIS 10K…20K
Thread:
G3/4, G1, R3/4,
R1, MNPT3/4, MNPT1 -
Sensor length
Compact
-
Communication
2-wire 4…20 mA
-
Certificates / Approvals
ATEX, FM, CSA, CSA C/US, IEC Ex, NEPSI, EAC
-
Safety approvals
Overfill protection WHG
Leakage
SIL3 -
Design approvals
EN 10204-3.1
NACE MR0175, MR0103
ASME B31.3
AD2000 -
Marine approval
GL/ ABS/ LR/ BV/ DNV
-
Options
PWIS free
Pressure tight feed through
Weather protection -
Components
Nivotester FTL825, Transmitter
Field of application
Liquiphant FTL80 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill protection in applications with functional safety up to SIL3 with one device. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.
Point level switch for liquids up to SIL3.Process connections: Threads and flangesTemperature: -60 to +280°C (-76 to +540°F)Pressure: -1 to +100bar (-14.5 to +1,450psi)Sensor material: 316L, Alloy CInternational explosion protection certificates, overfill protection WHG, SIL, marine approvals
Benefits
Use in safety systems requiring functional safety to SIL3 in accordance with IEC 61508 Ed.2.0/ IEC 61511-1/ISA 84-1 and DIN EN ISO 13849Proof test: proof testing interval up to 12 years, Slave devices tested at the press of a button Permanent self-monitoring/internal redundancy4-20mA interface (acc. to NAMUR NE 06/NE 43): easy integration via the switching unit (Nivotester FailSafe FTL825) with a two-channel output (safety contacts) and locking function or direct integration into a safety PLCNo adjustment: quick, low-cost startupNo mechanically moving parts: no maintenance, no wear, long operating lifeMonitoring of fork for damage, corrosion, build-up and mechanical blocking
Vibronic Point level switch Liquiphant FTL71
Point level switch with extension tube for liquids in high-temperature applications
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Modular housing concept
High process temperatures up to 280°C
wide range of process connections
Analogue and bus interfaces
Extensive certificate range (e.g. Ex,WHG)
compact, e.g. pipes
Dual Sealing / Second line of defense -
Specialities
Foam detection
Detect a density change
second line of defense -
Supply / Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Ambient temperature
-50 °C…+70 °C
(-58 °F…+158 °F) -
Process temperature
-60 °C…+280 °C
(-76 °F…+540 °F)
(300°C / 572°F, 50h cumulated) -
Process pressure / max. overpressure limit
Vacuum…100 bar
(Vacuum…1450 bar) -
Min. density of medium
0.5g/cm³ (0.4g/cm³ optional)
-
Main wetted parts
316L / Alloy
PFA and Enamel on request -
Process connection
Thread:
G3/4A, G1A, R3/4″, R1, NPT3/4, NPT1
Flange:
DIN DN25…DN100,
ASME 1″…4″,
JIS 25A…100A -
Sensor length
Length 130mm (5.12″) (Liquiphant II)
148mm…3000mm / 6000mm optional
(5.83″…118″ / 236″ optional) -
Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
-
Safety approvals
SIL
-
Design approvals
EN 10204-3.1
NACE MR0175, MR0103
ASME B31.3
AD2000 -
Marine approval
GL/ ABS
-
Options
Heavy duty stainless steel housing mainly for the oil and gas industry
-
Components
FTL325P/FTL375P Interface PFM
FTL325N/FTL375N Interface NAMUR
Field of application
Liquiphant FTL71 is a point level switch with extension tube for use in hazardous areas with all international certificates. FTL71 is especially designed for applications with high process temperatures up to 280°C and can be used up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of defense offers the highest degree of safety. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.
Point level switch for all liquids.Process connections: Threads and flangesTemperature: -60 to +280°C (-76 to +540°F)Pressure: -1 to +100bar (-14.5 to +1,450psi)Sensor material: 316L, Alloy (PFA and Enamel on request)International explosion protection certificates, overfill protection WHG, SIL, marine approvals
Benefits
Use in safety systems requiring functional safety to SIL2 in accordance with IEC 61508/IEC 61511-1 With welded gas-tight feed-through maximum safety in the event of damaged sensor Wide variety of electronics, e.g. NAMUR, relay, thyristor, PFM signal output: the right connection for every process control systemLarge number of process connections to choose from: universal usageNo calibration: quick, low-cost start-upNo mechanically moving parts: no maintenance, no wear, long operating life. Monitoring of fork for damage: guaranteed functionFDA approved materials (PFA Edlon)
Vibronic Point level detection Liquiphant FTL70
Point level switch for liquids in high-temperature applications
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Modular housing concept
High process temperatures up to 280°C
wide range of process connections
Analogue and bus interfaces
Extensive certificate range (e.g. Ex,WHG)
compact, e.g. pipes
Dual Sealing / Second line of defense -
Specialities
Foamdetection
Detect a densitychange
second line of defense -
Supply / Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Ambient temperature
-50 °C…+70 °C
(-58 °F…+158 °F) -
Process temperature
-60 °C…+280 °C
(-76 °F…+540 °F,
(300°C / 572 °F 50h, cumulated -
Process pressure / max. overpressure limit
Vacuum…100 bar
(Vacuum…1450 psi) -
Main wetted parts
316L / Alloy
PFA and Enamel on request -
Process connection
Thread:
G3/4A, G1A, R3/4″, R1, NPT3/4, NPT1
Flange:
DIN DN25…DN100,
ASME 1″…4″,
JIS 25A…100A -
Sensor length
65mm (2.56″)
-
Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
-
Safety approvals
SIL
-
Design approvals
EN 10204-3.1
NACE MR0175, MR0103
ASME B31.3
AD2000 -
Marine approval
GL/ ABS
-
Options
Heavy duty stainless steel housing mainly for the oil and gas industry
-
Components
FTL325P/FTL375P Interface PFM
FTL325N/FTL375N Interface NAMUR
Field of application
Liquiphant FT70 is a point level switch for use in hazardous areas with all international certificates. FTL70 is especially designed for applications with high process temperatures up to 280°C and can be used for Safety Instrumented Systems up to SIL2, in homogeneous redundancy up to SIL3. An integrated second line of defense offers the highest degree of safety. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.
Point level switch for all liquids.Process connections: Threads and flangesTemperature: -60 to +280°C (-76 to +540°F)Pressure: -1 to +100bar (-14.5 to +1,450psi)Sensor material: 316L, Alloy (PFA and Enamel on request)International explosion protection certificates, overfill protection WHG, marine approvals, SIL
Benefits
Use in safety systems requiring functional safety to SIL2 in accordance with IEC 61508/IEC 61511-1 With welded gas tight feedthrough maximum safety in the event of damaged sensor Wide variety of electronics, e.g. NAMUR, relay, thyristor, PFM signal output: the right connection for every process control systemLarge number of process connections to choose from: universal usageNo calibration: quick, low-cost start-upNo mechanically moving parts: no maintenance, no wear, long operating life.Monitoring of fork for damage: guaranteed functionFDA approved materials (PFA Edlon)
Liquiphant FTL64 – reliable detection at high temperatures
A level switch for hot and pumpable liquids
- F
- L
- E
- X
The new Liquiphant FTL64
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Compact vibronic device for high pressure and high temperature applications,
Optional extension tube up to 6 m (19.7 ft),
Modular housing concept,
Wide range of certificates -
Specialities
Heartbeat Technology,
Bluetooth® Operation and maintenance SmartBlue App,
LED Module,
RFID TAG for easy identification,
Second line of defense,
Temperature spacer for high process temperature,
Plug and play functionalities -
Supply / Communication
19…253V AC / 2-wire,
10…55V / DC-PNP 3-wire,
9…20V DC with relay DPDT,
19…253V AC or 19…55V DC with relay DPDT,
2-wire NAMUR,
2-wire PFM,
4-20mA HART -
Ambient temperature
-60 °C…+70 °C
(-76 °F…+158 °F) -
Process temperature
-60 °C…+280 °C
(-76 °F…+536 °F) -
Process pressure / max. overpressure limit
Vacuum…100 bar
Vacuum…1450 psi -
Min. density of medium
0.5 g/cm³
(0.4 g/cm³ optional) -
Main wetted parts
316L
Alloy -
Process connection
Threads:
3/4″, 1″
Flanges:
DN25…DN100
ASME 1″…4″
JIS 50A -
Sensor length
up to 6 m (19.7 ft)
-
Communication
2-wire direct load
HART
DC-PNP 3-wire
Relays
NAMUR
PFM
Bluetooth® wireless technology -
Certificates / Approvals
ATEX, IEC Ex, NEPSI, EAC Ex, KC, JPN Ex, INMETRO, UK Ex
-
Safety approvals
Overfill protection WHG
SIL2/ SIL 3 according to IEC 61508 -
Design approvals
EN 10204-3.1
NACE MR0175, MR0103
ASME B31.3 Process Piping
AD2000
CRN -
Marine approval
ABS/ LR/ BV/ DNV
-
Options
Ambient temperature down to -60 °C (-76 °F),
Heavy duty stainless steel housing,
Coating PFA (conductive) -
Components
FTL325P Interface PFM
FTL325N Interface NAMUR
Field of application
Liquiphant FTL64 has a strong focus on high temperature applications and simplicity with easy proof testing, reliability and safety (SIL) with compliance to IEC 61508, API 2350 and WHG. The vibronic device is determined for a safe and active measuring technology in applications with high temperatures and want a reliable and proven point level detection for tank overfill protection and pump dry run protection. The FTL64 is easy to use, has a digital connection and gives a real-time data at hand.
Point level switch with extension tube for pumpable liquidsProcess temperature: -60 °C to +280°C (PFA coated: up to 230°C) Process pressure: -1 to +100bar (PFA coated: up to 40bar) Ambient temperature: -60 to +70°C Viscosity up to 10,000mm2/s (cSt) Optional PFA coating for aggressive media Process connections: threads, flanges and hygienic process connection (Tri-Clamp)International explosion protection certificates, overfill protection WHG, SIL, marine approvals
Benefits
Universal measuring principle for limit detection – proven vibronic technology Developed according IEC 61508 for highest safety – SIL2/3 applications (3rd party approved)Periodic proof testing is quickly and simple organized with guided wizards via the SmartBlue-App or via a test button or magnetic pin from outside. Via digital communication you can initiate the device for a fast and easy testing of the safety loop.Heartbeat Technology allows safe, continuous diagnostics and a simple verification, without process interruptionCentralized asset management with easy online access to all device information thanks to digital communication Second line of defense to protect the environment
Liquiphant FTL63 – hygienic point level switch for liquids
Proven in the field, easy to use and perfectly suitable for hygienic applications.
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Premium device for point level detection
in hygienic/aseptic applications.
Focus Food & Beverage and Life Sciences.
Compact sensor version with an optional pipe extension up to 3 m (9,85 ft).
Modular housing concept.
Wide range of certificates. -
Specialities
Plug and play functionalities,
Heartbeat Technology,
LED Module,
Bluetooth® Operation and maintenance,
Surface finish: mechanical or electro-polished,
Density/Concentration measurement,
SIL 2/3 according to IEC 61508. -
Supply / Communication
19 ..253V AC,
10…55V DC-PNP,
9…20V DC with relay DPDT,
19…253V AC or 19…55V DC with relay DPDT,
8/16mA HART,
NAMUR,
PFM -
Ambient temperature
-50 °C…+70 °C
(-58 °F…+158 °F) -
Process temperature
-50 °C…+150 °C
(-58 °F…+302 °F) -
Process pressure / max. overpressure limit
Vacuum…64 bar
(Vacuum…928 psi) -
Min. density of medium
0.5 g/cm³
(0.4 g/cm³ optional) -
Main wetted parts
316L
-
Process connection
Threads (for weld-in adapter):
G3/4A, G1A -
Process connection hygienic
Tri-Clamp,
DIN 11851, DIN11864-1
Ingold,
Flush mount,
DRD,
SMS1145,
Varivent (Var ) -
Sensor length
Compact sensor
Short tube (Liquiphant II)
148mm…3000mm (6,00…118″) -
Communication
HART
Bluetooth® wireless technology -
Certificates / Approvals
ATEX, IEC Ex, CSA C/US, JPN Ex, KC Ex,
INMETRO Ex, NEPSI Ex/CCC, UK Ex -
Safety approvals
Overfill protection WHG;
SIL 2/ SIL 3 -
Design approvals
Inspection certificate 3.1, EN10204,
CoC ASME BPE,
Conformity to cGMP,
EU Food Contact Material (EC) 1935/2004,
US Food Contact Material FDA CFR 21,
CN Food Contact Material GB 4806,
Declaration of Conformity ASME B31.3,
AD2000,
CRN approval -
Hygienic approvals
3-A,
EHEDG,
CoC-ASME BPE -
Options
LED module,
Bluetooth module,
Graphic touch display,
Customized settings,
Weld-in adapter -
Components
FTL325P Interface PFM
FTL325N Interface NAMUR
FML621 Density controller
-
Measuring principle
Vibration Density
-
Product Headline
Hygienic point level switch for liquids.
Point level detection in process and storage tanks as well as in pipelines in hygienic and aseptic applications. -
Characteristic / Application
Premium device for density measurement in hygienic/aseptic applications.
Focus Food & Beverage and Life Sciences.
Compact sensor version with an optional pipe extension up to 3 m (9,85 ft).
Modular housing concept.
Wide range of certificates. -
Supply / Communication
via density controller FML621
-
Liquiphant FTL62 – the specialist for aggressive media
A level switch for aggressive and pumpable liquids
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Compact vibronic device with highly corrosion-resistant coating for aggressive media,
Optional extension tube up to 3 m (9.8ft),
Modular housing concept -
Specialities
Heartbeat Technology,
Bluetooth® Operation and maintenance SmartBlue App,
LED Module,
RFID TAG for easy identification,
Second line of defense
Temperature spacer for high process temperature,
Plug and play functionalities -
Supply / Communication
19…253V AC / 2-wire,
10…55V / DC-PNP 3-wire,
9…20V DC with relay DPDT,
19…253V AC or 19…55V DC with relay DPDT,
2-wire NAMUR,
2-wire PFM,
4-20mA HART -
Ambient temperature
-60 °C…+70 °C
(-76 °F…+158 °F) -
Process temperature
-50 °C…+150 °C
(-58 °F…+302 °F) -
Process pressure / max. overpressure limit
Vacuum…40 bar
Vacuum…580 psi -
Min. density of medium
0.5 g/cm³
(0.4 g/cm³ optional) -
Main wetted parts
ECTFE,
PFA (Edlon, RubyRed or conductive)
316L
Enamel -
Process connection
Flanges:
DN25…DN100
ASME 1″…4″
JIS 50A -
Sensor length
Up to 3 m (9.8 ft)
-
Communication
2-wire direct load
HART
DC-PNP 3-wire
Relays
NAMUR
PFM
Bluetooth® wireless technology -
Certificates / Approvals
ATEX, IEC Ex, NEPSI, EAC Ex, KC, JPN Ex, INMETRO, UK Ex
-
Safety approvals
Overfill protection WHG
SIL2/ SIL 3 according to IEC 61508 -
Design approvals
EN 10204-3.1
ASME B31.3 Process Piping
CRN -
Marine approval
ABS/ LR/ BV/ DNV
-
Options
Ambient temperature down to -60 °C (-76 °F),
Heavy duty stainless steel housing -
Components
FTL325P Interface PFM
FTL325N Interface NAMUR
-
Measuring principle
Vibration Density
-
Product Headline
Coated Liquiphant with Density Computer FML621
-
Characteristic / Application
Compact vibronic device with highly corrosion-resistant coating for aggressive media,
Optional extension tube up to 3 m (9.8ft),
Modular housing concept -
Ambient temperature
-60 °C…+70 °C
(-51 °F…+158 °F) -
Process temperature
-50 °C…+150 °C
(-58 °F…+302 °F) -
Process pressure
Vacuum…40 bar
Vacuum…580 psi -
Sensor length
Up to 3 m (9.8ft)
-
Certificates / Approvals
ATEX, IEC Ex
-
Specialities
Heartbeat Technology,
Bluetooth® Operation and maintenance SmartBlue App,
LED Module,
RFID TAG for easy identification,
Second line of defense
Temperature spacer for high process temperature,
Plug and play functionalities -
Vibronic Point level detection Liquiphant FTL51C
Point level switch for liquids with highly corrosion-resistant coating
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
High protection against aggressive media by using antistatic coating
Modular housing concept
wide range of process connections
Analogue and bus interfaces
Extensive certificate range (e.g.Ex,WHG)
pipe extension up to 3m (6m option) -
Specialities
Foamdetection
Detekt a densitychange
second line of defense -
Supply / Communication
PROFIBUS PA
19…253V AC, 2-wire
10…55V DC-PNP, 3-wire
DPDT, 19…253V AC, 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM, 2-wire
NAMUR with testbutton -
Ambient temperature
-50 °C…+70 °C
(-58 °C…+158 °F) -
Process temperature
-50 °C…+150 °C
(-58 °F…+302 °F)
up to 230 °C / 450°F on request -
Process pressure / max. overpressure limit
Vacuum…40 bar
(Vacuum…580 psi) -
Min. density of medium
0.5g/cm³ (0.4g/cm³ optional)
-
Main wetted parts
ECTFE
PFA (Edlon)
PFA (Rubyred)
PFA (conductive)
Enamel -
Process connection
Flange:
DN25…DN100,
ASME 1″…3″,
JIS RF10 K 50 -
Process connection hygienic
FDA conform with PFA (Edlon)
-
Sensor length
ECTFE, PFA 130mm, 148mm…3000mm
(ECTFE, PFA 5.12″, 5.83″…118″)
Enamel 130mm, 148mm…1200mm
(Enmal 5.12″, 5.83″…47.24″) -
Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
-
Safety approvals
SIL2/ SIL3
-
Design approvals
EN 10204-3.1
-
Marine approval
GL/ ABS/ DNV
-
Options
Heavy duty stainless steel housing mainly for the oil and gas industry
-
Components
FTL325P/FTL375P Interface PFM
FTL325N/FTL375N Interface NAMUR
-
Measuring principle
Vibration Density
-
Characteristic / Application
Liquiphant M Density
with Density Computer FML621
Temperature and pressure measurement
High protection against aggressive media by using antistatic coating
Modular housing concept
Wide range of process connections
Pipe extension up to 3 m (6 m option) -
Supply / Communication
Transmitter power supply (MUS)
-
Ambient temperature
-50…80°C
-50…60°C for hazardous applications -
Process temperature
0…80 °C (validity of accuracy data)
-50…0°C / 80…150 °C (with reduced technical data) -
Process pressure
0…25 bar
>25…40 bar (with reduced technical data) -
Wetted parts
ECTFE, PFA and Enamel
-
Sensor length
115…3000 mm
(depends by the covering) -
Output
Vibronic Point level detection Liquiphant FTL51
Point level switch with extension tube for liquids in all industries
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Modular housing concept
wide range of process connections
Analogue and bus interfaces
Extensive certificate range (e.g. Ex,WHG)
pipe extension up to 3m (6m option) -
Specialities
Foamdetection
Detect a densitychange
second line of defense -
Supply / Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC or 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Ambient temperature
-50 °C…+70 °C
(-58 °F…+158 °F) -
Process temperature
-50 °C…+150 °C
(-58 °F…+302 °F) -
Process pressure / max. overpressure limit
Vacuum…100 bar
-
Min. density of medium
0.5g/cm³(0.4g/cm³ optional)
-
Main wetted parts
316L / Alloy
-
Process connection
Thread:
G3/4A, G1A, R3/4″, R1, NPT3/4, NPT1
Flange:
DN25…DN100,
ASME 1″…4″,
JIS 25A…100A -
Process connection hygienic
Tri-Clamp ISO2852
-
Sensor length
Length 130mm (5.12″) (Liquiphant II)
148mm…6000mm (5.83″…236″) -
Communication
PROFIBUS PA
19…253V AC
10…55V DC-PNP
19…253V AC bzw 10…55V DC
8/16mA, 11…36V DC
NAMUR
PFM -
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
-
Safety approvals
SIL2/ SIL3
-
Design approvals
EN 10204-3.1
NACE MR0175, MR0103
ASME B31.3
AD2000 -
Marine approval
GL/ ABS/ DNV
-
Options
Heavy duty stainless steel housing mainly for the oil and gas industry
-
Components
FTL325P/FTL375P Interface PFM
FTL325N/FTL375N Interface NAMUR -
Successor
Liquiphant FTL51B
-
Measuring principle
Vibration Density
-
Characteristic / Application
Liquiphant M Density
with Density Computer FML621
Temperature and pressure measurement
Modular housing concept
Wide range of process connections
Pipe extension up to 3 m (6 m option) -
Supply / Communication
Transmitter power supply (MUS)
-
Ambient temperature
-50…70°C
-50…60°C for hazardous applications -
Process temperature
0…80°C (validity of accuracy data)
-50…0°C / 80…150 °C (with reduced technical data) -
Process pressure
0…25 bar
>25..100 bar (with reduced technical data) -
Wetted parts
316L/C4
-
Sensor length
115…3000 mm
>3000…6000 mm (Option) -
Output
Pulse
-
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, TIIS, INMETRO, NEPSI
-
Specialities
Commissioning with ReadWin2000
Vibronic Point level detection Liquiphant FTL33
Point level switch for liquids in compact hygienic design for the food industry
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Point level switch for liquids
in the food sector -
Supply / Communication
20 … 253V AC/DC, 2-wire
10 … 30V DC-PNP, 3-wire -
Ambient temperature
-40 °C … 70 °C
(-40 °F … 158 °F) -
Process temperature
-40 °C … 150 °C
(-40 °F … 302 °F) -
Process pressure / max. overpressure limit
Vacuum … 40 bar
(Vacuum … 580 psi) -
Min. density of medium
>0,7g/cm³
(>0,5g/cm³ optional) -
Main wetted parts
316L
-
Process connection
Threads:
G1/2, G3/4, G1, MNPT1/2, MNPT3/4, MNPT1, R1/2, R3/4, R1 -
Process connection hygienic
Flush mount by use of weld in adapter
DIN11851
Tri-Clamp -
Communication
AC/DC, DC-PNP, IO-Link
-
Certificates / Approvals
CSA C/US, EAC
-
Safety approvals
Overfill protection WHG
Leakage -
Design approvals
EN 10204-3.1
-
Hygienic approvals
3A, EHEDG
-
Options
Switching delay
Cleaned from oil+grease,
Surface finish measurement
Field of application
Liquiphant FTL33 is a point level switch for liquids. The FTL33 is especially designed for food & beverage applications where hygienic requirements are requested. The Liquiphant is used for overfill protection or pump dry-run protection. The IO-Link capability allows easy parameter setting.Compact:- Smallest vibronic sensor in the marketSafe:- Continuous self-monitoring- Reliable switching independent of media propertiesEasy:- No calibration- Plug & play-IO-Link connectivity
Point level switch in compact hygienic design with stainless steel housing for the food industry.Process connections: Threads, hygienic process connections, M24 process adapterTemperature: -40 to +150°C (-40 to +302°F)Pressure: -1 to +40bar (-14.5 to +580psi)Surface roughness: 0.76µm or 1.5µmOverfill protection and leakage detection WHG, hygienic certificates, final inspection report
Benefits
Designed for hygienic applications especially in the food industry – hygienic process connections and approvals available. IO-Link reduces costs and complexity due to easy configuration of the devices via engineering toolsCIP and SIP cleanability ensured – up to protection class IP69k Designed according to highest requirements to quality and environmental sustainability, the self-monitoring Liquiphant offers safe switching also in case of power supply loss Independent of changing media properties an accurate switching point is offered A real plug & play sensor is offered without any need for adjustment even with changing media. Measurement is unaffected by conductivity, build-up, turbulence, flows or air bubbles No calibration is required, no specific know-how or tools (e.g. software) necessary Robust design made of stainless steel (316L) assures highest durability – no mechanically moved parts, free of maintenance
Vibronic Point level detection Liquiphant FTL31
Point level switch for liquids in compact design with stainless steel housing
- F
- L
- E
- X
-
Measuring principle
Vibration Liquids
-
Characteristic / Application
Level switch for liquids and is used in tanks, vessels
and pipes. -
Supply / Communication
20 … 253V AC/DC, 2-wire
10 … 30V DC-PNP 3-wire -
Ambient temperature
-40 °C … 70 °C
(-40 °F … 158 °F) -
Process temperature
-40 °C … 150 °C
(-40 °F … 302 °F) -
Process pressure / max. overpressure limit
Vacuum … 40 bar
(Vacuum … 580 psi) -
Min. density of medium
>0,7g/cm³
(>0,5g/cm³ optional) -
Main wetted parts
316L
-
Process connection
Threads:
G1/2, G3/4, G1, MNPT1/2, MNPT3/4, MNPT1, R1/2, R3/4, R1 -
Communication
AC/DC, DC-PNP
-
Certificates / Approvals
CSA C/US, EAC
-
Safety approvals
Overfill protection WHG
Leakage -
Design approvals
EN 10204-3.1
-
Marine approval
ABS/ LR/ BV/ DNV
-
Options
Adjustment switching delay
Cleaned from oil+grease,
PWIS free
Field of application
Liquiphant FTL31 is a point level switch for liquids. The FTL31 is designed for industrial applications in all industries, mainly the machinery industry. The Liquiphant is used for overfill protection or pump dry-run protection in cleaning systems. The IO-Link capability allows easy parameter setting.Compact:- Smallest vibronic sensor in the marketSafe:- Continuous self-monitoring-Reliable switching independent of media propertiesEasy:- No calibration – Plug & play- IO-Link connectivity
Point level switch in compact design with stainless steel housing.Process connections: ThreadsTemperature: -40 to +150°C (-40 to +302°F)Pressure: -1 to +40bar (-14.5 to 580psi)Surface roughness: 3.2µmOverfill protection and leakage detection WHG, marine approvals, final inspection report
Benefits
Designed according to highest requirements to quality and environmental sustainability. The self-monitoring Liquiphant offers safe switching also in case of power supply loss. Independent of changing media properties an accurate switching point is offered. IO-Link reduces costs and complexity due to easy configuration of the devices via engineering toolsA real plug & play sensor is offered without any need for adjustment even with changing media. Measurement is unaffected by conductivity, build-up, turbulence, flows or air bubblesNo calibration is required, no specific know-how or tools (e.g. software) necessaryRobust design made of stainless steel (316L) assures highest durabilityA modular design offers different process temperatures and the widest variety of process connections and accessories in the market to fit every applicationNo mechanically moved parts, free of maintenance
Ultrasonic measurement Time-of-Flight Prosonic FMU44
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 20m
- F
- L
- E
- X
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 4mm or +/- 0,2 % of set measuring range
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0,7 bar … 2,5 bar abs
(10 psi … 36 psi) -
Main wetted parts
PVDF
-
Process connection
Flange
DN100, ASME 4″, JIS 10K 100
DN150, ASME 6″, JIS 10K 150
DN200, ASME 8″, JIS 10K 200
Mounting bracket -
Blocking distance
0.5 m (1.9 ft)
-
Max. measurement distance
Liquids: 20 m (66 ft),
Solids: 10 m (33 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, INMETRO, NEPSI
-
Application limits
Fast filling and discharging rate:
FMU90 + FDU9x
Level limit detection:
FMU90 + FDU9x
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 4mm or +/- 0,2 % of set measuring range
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0,7 bar … 2,5 bar abs
(10 psi … 36 psi) -
Main wetted parts
PVDF
-
Process connection
Flange
DN100, ASME 4″, JIS 10K 100
DN150, ASME 6″, JIS 10K 150
DN200, ASME 8″, JIS 10K 200
Mounting bracket -
Blocking distance
0.5 m (1.9 ft)
-
Max. measurement distance
Liquids: 20 m (66 ft),
Solids: 10 m (33 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, INMETRO, NEPSI
-
Application limits
Take notice of range diagram
Field of application
The Prosonic FMU44 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. The envelope curve can be shown on the on-site display for simple diagnosis. Linearization function (up to 32 points) for conversion of the measured value into any unit of length, volume or flow rate.
Two-wire or four wire instrument for continuous non-contact level and flow measurement.
Process connection: Flange
Temperature: -40 to +80°C (-40 to +176°F)
Pressure: +0.7 to +2.5bar (+10 to +36psi)
Maximum measuring distance: Liquids 20m (66ft), Solids 10m (33ft)
Blocking distance: Liquids and Solids 0.5m (1.9ft)
International explosion protection certificates
Benefits
Reliable non-contact measurementQuick and simple commissioning via menu-guided on-site operation with four-line plain text display, 7 languages selectableEnvelope curves on the on-site display for simple diagnosisHermetically sealed and potted sensorChemically resistant sensor out of PVDFCalibration without filling or dischargingIntegrated temperature sensor for automatic correction of the temperature dependent sound velocity
Ultrasonic measurement Time-of-Flight Prosonic FMU42
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 10m
- F
- L
- E
- X
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 4 mm or +/- 0,2 % of set measuring range
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0.7 bar … 2.5 bar abs
(10 psi … 36 psi) -
Main wetted parts
PVDF
-
Process connection
Flange
DN80, ASME 3″, JIS 10K 80
DN100,ASME 4″, JIS 10K 100
Mounting bracket -
Blocking distance
0.4 m (1.3 ft)
-
Max. measurement distance
Liquids: 10 m (33 ft),
Solids: 5 m (16 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, INMETRO, NEPSI
-
Application limits
Foam / high turbulence possible:
FMU44/FDU92
Fast filling and discharging
rate:
FMU90 + FDU9x
Level limit detection
FMU90 + FDU9x
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 4 mm or +/- 0,2 % of set measuring range
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0.7 bar … 2.5 bar abs
(10 psi … 36 psi) -
Main wetted parts
PVDF
-
Process connection
Flange
DN80, ASME 3″, JIS 10K 80
DN100,ASME 4″, JIS 10K 100
Mounting bracket -
Blocking distance
0.4 m (1.3 ft)
-
Max. measurement distance
Liquids: 10 m (33 ft),
Solids: 5 m (16 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, INMETRO, NEPSI
-
Application limits
Take notice of range diagram
Field of application
The Prosonic FMU42 sensor is suited for non-contact level measurement in fluids, pastes, coarse bulk material and flow measurement in open channels or at weirs. The two-wire or four-wire compact transmitter can be used in applications with storage tanks, agitators, on stockpiles and conveyor belts. The envelope curve can be shown on the on-site display for simple diagnosis. Linearization function (up to 32 points) for conversion of the measured value into any unit of length, volume or flow rate.
Two-wire or four wire instrument for continuous non-contact level and flow measurement.
Process connection: Flange
Temperature: -40 to +80°C (-40 to +176°F)
Pressure: +0.7 to +2.5bar (+10 to +36psi)
Maximum measuring distance: Liquids 10m (33ft), Solids 5m (16ft)
Blocking distance: Liquids and Solids 0.4m (1.3ft)
International explosion protection certificates
Benefits
Reliable non-contact measurementQuick and simple commissioning via menu-guided on-site operation with four-line plain text display, 7 languages selectableEnvelope curves on the on-site display for simple diagnosisHermetically sealed and potted sensorChemically resistant sensor out of PVDFCalibration without filling or dischargingIntegrated temperature sensor for automatic correction of the temperature dependent sound velocity
Ultrasonic measurement Time-of-Flight Prosonic FMU41
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 8m
- F
- L
- E
- X
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 2 mm or +/- 0,2 % of set measuring range
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0.7 bar … 3 bar abs
(10 psi … 44 psi) -
Main wetted parts
PVDF
-
Process connection
G / NPT 2″
-
Blocking distance
0.35 m (1.15 ft)
-
Max. measurement distance
Liquids: 8 m (26 ft),
Solids: 3.5 m (11 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, TIIS, INMETRO, NEPSI
-
Application limits
For higher resistance:
FMU42/FDU9x
Foam / high turbulence possible:
FMU42/FDU91
Fast filling and discharging rate:
FMU90 + FDU9x
Level limit detection:
FMU90 + FDU9x
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 2 mm or +/- 0,2 % of set measuring range 1)
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0.7 bar … 3 bar abs
(10 psi … 44 psi) -
Main wetted parts
PVDF
-
Process connection
G / NPT 2″
-
Blocking distance
0.35 m (1.15 ft)
-
Max. measurement distance
Liquids: 8 m (26 ft),
Solids: 3.5 m (11 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, TIIS, INMETRO, NEPSI
-
Application limits
Take notice of range diagram
-
Measuring principle
Ultrasonic
-
Product headline
Compact ultrasonic measuring instrument
Cost effective solution for open channels -
Max. measurement error
Low accuracy
-
Measuring range
Measuring distance 0,4…8m [1.3…26ft]
-
Max. process pressure
atm.
-
Medium temperature range
-40°C…80°C
(-40°F…176°F) -
Ultrasonic measurement Time-of-Flight Prosonic FMU40
Cost effective device for sophisticated level measurement in liquids and bulk solids for up to 5m
- F
- L
- E
- X
- F
- L
- E
- X
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 2 mm or +/- 0.2 % of set measuring range
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0.7 bar … 3 bar abs
(10 psi … 44 psi) -
Main wetted parts
PVDF
-
Process connection
G / NPT 1 1/2″
-
Blocking distance
0.25 m (0.8 ft)
-
Max. measurement distance
Liquids: 5 m (16 ft),
Solids: 2 m (6.6 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, TIIS, INMETRO, NEPSI
-
Application limits
For higher resistance:
FMU42/FDU9x
Foam / high turbulence possible:
FMU41/FDU91
Fast filling and discharging rate:
FMU90 + FDU9x
Level limit detection:
FMU90 + FDU9x
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Accuracy
+/- 2 mm or +/- 0.2 % of set measuring range 1)
-
Ambient temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process temperature
-40 °C … 80 °C
(-40 °F … 176 °F) -
Process pressure / max. overpressure limit
0.7 bar … 3 bar abs
(10 psi … 44 psi) -
Main wetted parts
PVDF
-
Process connection
G / NPT 1 1/2″
-
Blocking distance
0.25 m (0.8 ft)
-
Max. measurement distance
Liquids: 5 m (16 ft),
Solids: 2 m (6.6 ft) -
Communication
4…20 mA HART
-
Certificates / Approvals
ATEX, FM, CSA, TIIS, INMETRO, NEPSI
-
Application limits
Take notice of range diagram
-
Measuring principle
Ultrasonic Limit
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire HART
-
Ambient temperature
Ultrasonic measurement Time-of-Flight Prosonic FMU30
Cost effective all-round instrument for level applications in liquids and bulk solids
- F
- L
- E
- X
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire
-
Accuracy
+/- 3 mm or +/- 0,2 % of set measuring range
-
Ambient temperature
-20 °C … 60 °C
(-4 °F … 140 °F) -
Process temperature
-20 °C … 60 °C
(- 4°F … 140 °F) -
Process pressure / max. overpressure limit
0.7 bar … 3 bar abs
(10 psi … 44 psi) -
Main wetted parts
PP/EPDM
-
Process connection
G / NPT 1 1/2″
G / NPT 2″ -
Blocking distance
1 1/2″: 0.25 m (0.8 ft)
2″:0.35 m (1.15 ft) -
Application
Application
-
Max. measurement distance
Max. measurement distance
-
Communication
4…20 mA
-
Certificates / Approvals
ATEX, CSA C/US, IEC Ex, NEPSI
-
Options
Accessory Enclosed:
UNI flange 2″ … 4″ -
Application limits
Application limits
-
Measuring principle
Ultrasonic
-
Characteristic / Application
Compact ultrasonic transmitter
-
Supply / Communication
2-wire
-
Accuracy
+/- 3 mm or +/- 0.2 % of set measuring range
-
Ambient temperature
-20 °C … 60 °C
(-4 °F … 140 °F) -
Process temperature
-20 °C … 60 °C
(-4 °F … 140 °F) -
Process pressure / max. overpressure limit
0.7 bar … 3 bar abs
(10 psi … 44 psi) -
Main wetted parts
PP/EPDM
-
Process connection
G / NPT 1 1/2″
G / NPT 2″ -
Blocking distance
Sensor 1 1/2″: 0.25 m
Sensor 2″: 0.35 m -
Max. measurement distance
Sensor 1-1/2″: 2 m (6.6 ft)
Sensor 2″: 3.5 m (11 ft) -
Communication
4…20 mA
-
Certificates / Approvals
ATEX, CSA C/US, IEC Ex, NEPSI
Micropilot FMR67B – 80 GHz radar sensor
Highest performance for demanding applications
- F
- L
- E
- X
-
Measuring principle
Level radar solid
-
Characteristic / Application
Reliable, non-contact level measurement for high silos,
bunkers or stockpiles, especially with many installations,
long measuring ranges and heavy buildup -
Specialities
Heartbeat Verification + Monitoring, SIL 2/3 according to IEC 61508,
Bluetooth® commissioning, operation and maintenance with
SmartBlue App, HistoROM, RFID TAG for easy identification
Very narrow beam angle, Purge air connection, Alignment device -
Supply / Communication
2-wire (HART/ PROFIBUS PA)
PROFINET with Ethernet-APL
Bluetooth® wireless technology -
Frequency
W-Band (~80 GHz)
-
Antenna
2″ / 50mm drip-off, PTFE
3″ / 80mm flush, PTFE
2.6″ / 65mm horn antenna, 316L -
Accuracy
+/- 3 mm (0.12 in)
-
Ambient temperature
-40 … +85 °C (-40 … +185 °F)
-
Process temperature
-40 … +450 °C (-40 … +842 °F)
-
Process pressure / max. overpressure limit
Vacuum…160 bar (2320 psi)
-
Main wetted parts
Horn antenna: 316L / 1.4404, Al2O3 (ceramic),
graphite Flush / Drip-off antenna: PTFE -
Process connection
Flange:
Standard or UNI DN80…DN250 -
Max. measurement distance
125 m (410 ft)
-
Communication
HART/ PROFIBUS PA
PROFINET with Ethernet-APL
Bluetooth® wireless
technology and app (optional) -
Certificates / Approvals
IEC Ex, ATEX, CSA C/US, EAC Ex, JPN Ex, KC Ex,
INMETRO Ex, NEPSI Ex, UK Ex -
Safety approvals
SIL2, SIL3
-
Design approvals
Acceptance test certificate 3.1, EN10204;
NACE MR0175 / ISO 15156;
EU Food Contact Material (EC) 1935/2004;
US Food Contact Material FDA CFR 21;
Declaration of Conformity ASME B31.3;
CRN approval -
Marine approval
ABS, LR, BV, RINA, DNV
-
Options
Display, Customized settings,
App ‘SmartBlue’ for commissioning and operation via Bluetooth
Heartbeat for batch detection; Gas-tight implementation;
Overvoltage protection; PWIS free
Field of application
Micropilot FMR67B is part of the new generation of 80 GHz radar sensors. It is suitable for continuous non-contact level measurement in demanding solid applications – even with extreme process temperatures. Wizards guide users through commissioning, proof tests and verification of the devices and thus guarantee a simple operation. The narrow beam angle is suitable for measurements in narrow silos. Heartbeat Technology identifies anomalies for increased safety and productivity.
The Micropilot FMR67B is suitable for free space applications up to 125m and offers high beam focusing for vessels with many internal fittings. Process connections: FlangesTemperature: –40 to +450 °C (-40 to +842° F) Pressure: –1 to +160 bar (-14.5 to +2320.6 psi)Maximum measuring range: 125 m (1410 ft)Accuracy: ±3 mm (0.12 in) W-Band: 80 GHzInternational explosion protection certificates, SIL, 5- or 10-point factory calibration certificate
Benefits
Easy handling through intuitive operation and wizards, for commissioning and verificationIncreased productivity thanks to process monitoring, verification, and diagnostics in the running process with Heartbeat Technology Safety by Design: Device development according to IEC 61508 Simple device integration into asset management systems through digital communication Highly reliable measurement thanks to narrow beam angle and intelligent evaluation even in vessels with interfering installations
Micropilot FMR66B – 80 GHz radar sensor
Highest performance in every application
- F
- L
- E
- X
-
Measuring principle
Level radar solid
-
Characteristic / Application
For simple applications:
Reliable, non-contact measurement of levels
in silos or storage tanks for bulk solids -
Specialities
Heartbeat Verification + Monitoring, Bluetooth® Commissioning,
operation and maintenance with SmartBlue App,
HistoROM, RFID TAG for easy identification -
Supply / Communication
2-wire (HART/ PROFIBUS PA)
PROFINET with Ethernet-APL
Bluetooth® wireless technology -
Frequency
W-Band (~80 GHz)
-
Antenna
1-1/2″ / 40mm encapsulated, PVDF
2″ / 50mm Drip-off, PTFE -
Accuracy
+/- 3 mm (0.12 in)
-
Ambient temperature
-40 … +85 °C (-40 … +185 °F)
-
Process temperature
-40 … +130 °C (-40 … +266 °F)
-
Process pressure / max. overpressure limit
Vacuum…16 bar (232 psi)
-
Main wetted parts
PVDF or PTFE
-
Process connection
Thread:
G1-1/2″, MNPT1-1/2″
Flange:
UNI DN80…DN150
Mounting bracket -
Max. measurement distance
50 m (164 ft)
-
Communication
HART/ PROFIBUS PA
PROFINET with Ethernet-APL
Bluetooth® wireless
technology and app (optional) -
Certificates / Approvals
IEC Ex, ATEX, CSA C/US, EAC Ex, JPN Ex,
KC Ex, INMETRO Ex, NEPSI Ex, UK Ex -
Safety approvals
SIL
-
Design approvals
EU Food Contact Material (EC) 1935/2004;
US Food Contact Material FDA CFR 21;
Declaration of Conformity ASME B31.3;
CRN approval -
Marine approval
ABS, LR, BV, RINA, DNV
-
Options
Display, Customized settings,
App ‘SmartBlue’ for commissioning and operation via Bluetooth
Heartbeat for batch detection; Gas-tight implementation;
Overvoltage protection; PWIS free -
Application limits
DK < 1.6
Reduction of the max. possible measuring range due to:
Media with poor reflective properties cone of repose
extremely loose surface of bulk solids, e.g. bulk solids with a
low bulk density during pneumatic filling buildup, especially of
moist products.
Alternative for these applications: FMR67B
Field of application
The Micropilot FMR66B belongs to the new generation of 80 GHz radar sensors. It is suitable for continuous, non-contact level measurement in simple solid applications. Wizards guide through commissioning, retesting and verification of the instrument and guarantee easy handling. The small beam angle is perfect for measurements in narrow silos. Heartbeat Technology detects unwanted anomalies, such as buildup, for increased productivity.
The Micropilot FMR66B is for free-field applications up to 50 m and provides high beam focus for vessels with many internal internals.Process connections: Thread or mounting bracketTemperature: -40 to +200 °C (-40 to 392° F)Pressure: -1 to +16 bar (-14.5 to +266 psi)Maximum measuring range: 50 m (164 ft)Accuracy: ±3 mm (0.12 in)W-Band: 80 GHzInternational explosion protection certificates, SIL, ship approvals, 5- or 10-point factory calibration certificate
Benefits
Easy handling through intuitive operation and wizards, for commissioning and verificationEasier troubleshooting thanks to recommended actions in the displaySafety by Design: Device development according to IEC 61508Increased productivity because of process monitoring, verification and diagnostics during operation with Heartbeat TechnologyEasy device integration into asset management systems through digital communication
Micropilot FMR63B – 80 GHz radar sensor
More simplicity with the specialist for hygienic applications
- F
- L
- E
- X
-
Measuring principle
Level radar
-
Characteristic / Application
Premium device for continuous non-contact level measurement
with hygienic requirements (ASME BPE, USP Class VI); -
Specialities
Heartbeat Technology,
SIL 2/3 according to IEC 61508,
Bluetooth® commissioning;
Operation and maintenance with SmartBlue app;
HistoROM;
RFID TAG for easy identification;
Very narrow beam angle -
Supply / Communication
2-wire (HART/ PROFIBUS PA)
PROFINET with Ethernet-APL
Bluetooth® wireless technology -
Frequency
W-Band (~80 GHz)
-
Accuracy
+/-1 mm (0.04 in)
-
Ambient temperature
-40 °C … +85 °C (-40 °F … +185 °F)
-
Process temperature
-40 °C … +200 °C (-40 °F … +392 °F)
-
Process pressure / max. overpressure limit
Vacuum…25 bar (363 psi)
-
Main wetted parts
PEEK or PTFE
-
Process connection
Thread:
M24 -
Process connection hygienic
NEUMO BioControl;
Slotted-nut DIN11851;
Varivent;
Tri-Clamp ISO2852 -
Max. measurement distance
80 m (262 ft)
-
Communication
HART/ PROFIBUS PA
PROFINET with Ethernet-APL
Bluetooth® wireless
technology and app (optional) -
Certificates / Approvals
IEC Ex, ATEX, CSA C/US, EAC Ex, JPN Ex, KC Ex,
INMETRO Ex, NEPSI Ex, UK Ex; -
Safety approvals
Overfill protection WHG;
KTW drinking water approval W270;
NSF/ANSI 61 drinking water approval;
SIL 2/ SIL 3 -
Design approvals
Acceptance test certificate 3.1, EN10204;
EU Food Contact Material (EC) 1935/2004;
US Food Contact Material FDA CFR 21;
Declaration of Conformity ASME B31.3;
Conformity to cGMP;
CoC ASME BPE;
CRN approval -
Hygienic approvals
3-A;
EHEDG;
CoC-ASME BPE -
Options
Display,
Customized settings,
App ‘SmartBlue’ for commissioning and operation via Bluetooth
Gas-tight implementation;
Overvoltage protection;
PWIS free -
Application limits
Process temp. > 200°C (392°F) -> FMR62
Strong foam, stilling well and bypass (>10 m) -> FMR5x,FMP5x
Field of application
Micropilot FMR63B is part of the new generation of 80 GHz radar sensors. Thanks to its complete hygienic design it is suitable for continuous non-contact level measurement in hygienic applications. Wizards guide users through commissioning, proof tests and verification of the devices and thus guarantee a simple operation. Heartbeat Technology offers verification and monitoring functions to identify anomalies or checking the measurement accuracy.
The Micropilot FMR63B is for free space applications up to 80m and offers high beam focusing for vessels with many internal fittings. Process connections: M24 adapters and hygienic process connectionsTemperature: –40 to +200 °C (-40 to 392° F)Pressure: –1 to +25 bar (-14.5 to +362.6 psi)Maximum measuring range: 80 m (164 ft)Accuracy: ±1 mm (0.04 in) W-band: 80 GHzEHEDG, 3-A, ASME BPE, International explosion protection certificates, 5- or 10-point linearity protocol
Benefits
Fulfils highest compliance requirements of the industry Easy handling through intuitive operation and wizards, for commissioning and verificationIncreased productivity thanks to process monitoring, verification also of the radar´s accuracy and diagnostics in the running process with Heartbeat Technology Simple Display of device status – A change in the backlighting from green to red highlights errors immediately Simple device integration into asset management systems through digital communication
Micropilot FMR60B – 80 GHz radar sensor
More simplicity for your application
- F
- L
- E
- X
-
Measuring principle
Level radar
-
Characteristic / Application
For simple continuous non-contact level measurements in
liquids, pastes, and slurries; Not influenced by changing media,
temperature differences, gas phases or steam;
For vessels with many internals -
Specialities
Heartbeat Technology;
SIL 2 according to IEC 61508;
Bluetooth® commissioning;
Operation and maintenance with SmartBlue App;
HistoROM;
RFID TAG for easy identification -
Supply / Communication
2-wire (HART/ PROFIBUS PA)
PROFINET with Ethernet-APL
Bluetooth® wireless technology -
Frequency
W-Band (~80 GHz)
-
Accuracy
+/-1 mm (0.04 in)
-
Ambient temperature
-40 … +85 °C (-40 … +185 °F)
-
Process temperature
-40 … +200 °C (-40 … +392 °F)
-
Process pressure / max. overpressure limit
Vacuum…20 bar (290 psi)
-
Main wetted parts
PVDF, PTFE or PEEK
-
Process connection
Thread: G3/4″ and 1-1/2″, MNPT 3/4″ and 1-1/2″;
Flange: UNI DN80…DN150;
Mounting bracket -
Max. measurement distance
50 m (164 ft)
-
Communication
HART/ PROFIBUS PA
PROFINET with Ethernet-APL
Bluetooth® wireless
technology and app (optional) -
Certificates / Approvals
IEC Ex, ATEX, CSA C/US, EAC Ex, JPN Ex, KC Ex,
INMETRO Ex, NEPSI Ex, UK Ex -
Safety approvals
Overfill protection WHG;
SIL 2 -
Design approvals
Acceptance test certificate 3.1, EN10204;
EU Food Contact Material (EC) 1935/2004;
US Food Contact Material FDA CFR 21;
Declaration of Conformity ASME B31.3;
AD2000;
PMI test;
CRN approval -
Marine approval
ABS, LR, BV, RINA, DNV
-
Options
Display,
Customized settings,
App ‘SmartBlue’ for commissioning
and operation via Bluetooth
Gas-tight implementation;
Overvoltage protection;
PWIS free -
Application limits
Process temp. <-40°C (-40°F) or > 200°C (392°F) -> FMR62B
Very aggressive media -> FMR62B
Turbulences, stilling well and bypass -> FMR62B
Strong foam and interfaces –> FMP5x
Field of application
Micropilot FMR60B is part of the new generation of 80 GHz radar sensors. It is used for continuous non-contact level measurement in simple liquid applications with small process connections. Wizards guide users through commissioning, proof tests and verification of the devices and thus guarantee a simple operation. Heartbeat Technology offers verification and monitoring functions to identify anomalies for more safety and increased productivity.
Micropilot FMR60B is suitable for free-space applications up to 50m and offers high beam focusing for vessels with many internal fittings. Process connections: Threads and flangesTemperature: –40 to +200 °C (-40 to 392° F)Pressure: –1 bis +20 bar (-14.5 to +290 psi)Maximum measuring range: 50 m (164 ft)Accuracy: ±1 mm (0.04 in) W-band: 80 GHzInternational explosion protection certificates, overfill prevention WHG, SIL, marine approval, 5- or 10-point factory calibration certificate
Benefits
Easy handling through intuitive operation and wizards, for commissioning and verificationEasier troubleshooting through recommended actions shown on the display Reduction of systematic errors through guided SIL-locking, verification and proof testing Safety by design: Device development according to IEC 61508 Increased productivity thanks to process monitoring, verification and diagnostics in the running process with Heartbeat Technology
Radar measurement Time-of-Flight Micropilot FMR57
The standard sensor for highest demands in bulk solids level measurement
- F
- L
- E
- X
-
Measuring principle
Level radar solid
-
Characteristic / Application
For highest demands in measuring tasks of bulk solids:
Reliable, non-contact level measurement in high silos, bunkers or stockpiles also under extreme conditions like strongly dusting and build-up forming media -
Specialities
Heartbeat Technology,
Bluetooth® commissioning,
Operation and maintenance SmartBlue App,
Safety and reliability with Multi- Echo Tracking,
HistoROM,
RFID TAG for easy identification -
Supply / Communication
2-wire (HART / PROFIBUS PA/ FOUNDATION Fieldbus)
4-wire (HART),
Bluetooth® wireless technology and App (optional) -
Frequency
K-band (~26 GHz)
-
Antenna
Parabolic DN200/8″, DN250/10″
Horn DN80/3″, DN100/4″ -
Accuracy
+/- 3 mm (0.12 in)
-
Ambient temperature
-40…+80 °C
(-40…+176 °F) -
Process temperature
-40…+400 °C
(-40…+752 °F) -
Process pressure / max. overpressure limit
Vacuum…16 bar
(Vacuum…232 psi) -
Main wetted parts
316L, PEEK, PTFE, Polyamid
-
Process connection
Thread:
MNPT 1 1/2, R 1 1/2
Flange:
DN80…DN100,
ASME 3″…4″,
JIS 10K,
UNI DN100/8″…DN250/10″ -
Max. measurement distance
70 m (230 ft)
-
Communication
4…20 mA HART
PROFIBUS PA
FOUNDATION Fieldbus
Bluetooth® wireless technology -
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, INMETRO, NEPSI, KC, JPN Ex, EAC, UK Ex
-
Safety approvals
SIL
-
Design approvals
EN 10204-3.1
-
Marine approval
GL/ ABS/ LR/ BV/ DNV
-
Options
Display,
Customized parameterization,
Remote operation via SmartBlue App using Bluetooth®,
Antenna extension,
PWIS free -
Application limits
Dk < 1.6
Reduction of the max. possible measuring range through:
Media with poor reflection properties
Angle of repose
Extremely loose surfaces of bulk solids, e.g. bulk solids with low bulk weight for pneumatic filling
Build-up, above all of moist products
Field of application
Micropilot FMR57 is the sensor for the highest demands in bulk solids and best suited for measurements in high silos, bunkers or stockpiles. The parabolic antenna facilitates very small emitting angles and thus the measurement in slim silos. Micropilot free space radar is used for continuous, non-contact level measurement in powdery to granular bulk solids. Dust, filling noises, temperature layers and gas layers do not affect the measurement.
Horn or parabolic antenna. Thanks to the additional air purge connection even strongly dusting and build-up forming media do not present any problem.
Process connections: Thread or flange
Temperature: -40 to +400°C (–40 to 752°F)
Pressure: -1 to +16bar (-14.5 to +232psi)
Maximum measuring range: 70m (230ft)
K-band: 26GHz
International explosion protection certificates, SIL, 5-point linearity protocol
Benefits
Hardware and software developed according to IEC 61508 up to SIL3 (in homogeneous redundancy)HistoROM data management concept for fast and easy commissioning, maintenance and diagnosticsHighest reliability even in the presence of obstructions in the vessel due to new Multi-Echo Tracking evaluationHeartbeat Technology for a cost-effective and safe plant operation during the entire life cycleSeamless integration into control or asset management systems and intuitive, menu-guided operation concept (on-site or via the control system)Reliable measurement even for changing product and process conditionsWorld’s easiest proof test concept for SIL and WHG saves time and cost
Radar measurement Time-of-Flight Micropilot FMR52
For level measurement in aggressive liquids or applications with hygiene requirements
- F
- L
- E
- X
-
Measuring principle
Level radar
-
Characteristic / Application
Premium device for continuous non-contact level measurement, in which aggressive media are used as well as for highest hygiene requirements (ASME BPE, USP Class VI);
Flush mounted, fully PTFE filled horn antenna -
Specialities
Heartbeat Technology,
SIL 2 according to IEC 61508,
Bluetooth® commissioning,
Operation and maintenance SmartBlue App,
Safety and reliability with Multi-Echo Tracking,
HistoROM,
RFID TAG for easy identification -
Supply / Communication
2-wire (HART / PROFIBUS PA/ FOUNDATION Fieldbus)
4-wire (HART)
Bluetooth® wireless technology and App (optional) -
Frequency
K-band (~26 GHz)
-
Accuracy
+/- 2 mm (0.08 in)
-
Ambient temperature
-50…+80 °C
(-58…+176 °F) -
Process temperature
-196…+200 °C
(-321…+392 °F) -
Process pressure / max. overpressure limit
Vacuum…25 bar
(Vacuum…363 psi) -
Main wetted parts
PTFE
-
Process connection
Flange:
DN50…DN150
ASME 2″…6″
JIS 10K -
Process connection hygienic
Tri-Clamp ISO2852
DIN11851 -
Max. measurement distance
Standard: 40 m (131 ft)
With advanced dynamics: 60 m (197 ft) -
Communication
4…20 mA HART
PROFIBUS PA
FOUNDATION Fieldbus
Bluetooth® wireless technology -
Certificates / Approvals
ATEX, FM, CSA C/US, IEC Ex, JPN Ex, INMETRO, NEPSI, KC, EAC, UK Ex
-
Safety approvals
Overfill protection WHG
SIL -
Design approvals
EN 10204-3.1
ASME B31.3
AD2000 -
Hygienic approvals
3A, EHEDG
CoC ASME-BPE -
Marine approval
GL/ ABS/ LR/ BV/ DNV
-
Options
Display,
Customized parameterization,
Remote operation via SmartBlue App using Bluetooth®,
Gas-tight feed through,
PWIS free -
Application limits
Maximum measuring range is dependent on the tank form and/or application
Ammoniacal gas phase:
FMR54 in stilling well
Strong build-up formation:
FMR54 with air purge
Custody transfer measurement:
FMR5xx
Field of application
For applications in aggressive liquids Micropilot FMR52 offers extraordinary advantages with its completely PTFE-filled and flush-mounted horn antenna. The FMR52 is also the sensor for hygiene-sensitive applications in the food and life sciences industry – ASME BPE, USP Class VI, 3-A and EHEDG approvals. Micropilot is used for continuous, non-contact level measurement of liquids, pastes and slurries. The measurement is not affected by changing media, temperature changes, gas blankets or vapors.
Flush-mounted, completely PTFE-encapsulated horn antenna.
Process connections: Flush-mounted with cladded flange, process connections for hygiene requirements (Tri-Clamp, 11851)
Temperature: -196 to +200°C (-320,8 to +392°F)
Pressure: -1 to +25bar (-14.5 to +362psi)
Maximum measuring range: 40m (131ft), 60m (197ft) for enhanced dynamics
Accuracy: ±2mm
K-band: 26GHz
International explosion protection certificates, overfill prevention WHG, SIL, hygienic certificates, marine approval
Benefits
Hardware and software developed according to IEC 61508 up to SIL3 (in homogeneous redundancy)Reliable non-contact measurement even for changing product and process conditionsHistoROM data management concept for fast and easy commissioning, maintenance and diagnosticsHighest reliability even in the presence of obstructions in the vessel due to new Multi-Echo Tracking evaluationHeartbeat Technology for a cost-effective and safe plant operation during the entire life cycleSeamless integration into control or asset management systems and intuitive, menu-guided operation concept (on-site or via the control system)World’s easiest proof test concept for SIL and WHG saves time and cost
Radar measurement Time-of-Flight Micropilot FMR20
Level measurement of liquids and solids in all industries
- F
- L
- E
- X
-
Measuring principle
Level radar
-
Characteristic / Application
Water & Wastewater (e.g. basins / channels / rivers / dams / lift stations / storm water basins / pump control)
Utility applications in all industries
Storage tanks -
Specialities
Bluetooth® commissioning,
Operation and maintenance SmartBlue App -
Supply / Communication
2-wire (HART, 4…20 mA, Modbus),
Bluetooth® wireless technology and App (optional) -
Frequency
K-band (~26 GHz)
-
Accuracy
+/- 2 mm (0,08″)
-
Ambient temperature
-40…+80°C (-40…+176°F)
-
Process temperature
-40…+80°C (-40…+176°F)
-
Process pressure / max. overpressure limit
-1…3 bar (-14,5…43 psi)
-
Main wetted parts
PVDF, PBT
-
Process connection
Thread:
G1″, NPT1″; G1 1/2″, NPT1 1/2″, G2″, NPT2″,
Flange:
UNI DN80….DN150 (3″…6″)
Radar measurement Time-of-Flight Micropilot FMR10
Level measurement in liquids for water & wastewater and utilities in all industries
- F
- L
- E
- X
-
Measuring principle
Level radar
-
Characteristic / Application
Simple applications in Water & Wastewater
Utility applications in all industries
Easy storage tanks -
Specialities
Bluetooth® commissioning,
Operation and maintenance via SmartBlue App -
Supply / Communication
2-wire (4…20 mA)
Bluetooth® wireless technology and App -
Frequency
K-band (~26 GHz)
-
Accuracy
+/- 5 mm (0,2″)
-
Process temperature
-40…+60°C
(-40…+140°F) -
Process pressure / max. overpressure limit
-1…3 bar (-14,50…43 psi)
-
Main wetted parts
PVDF, PBT
-
Process connection
Thread:
G1″, NPT1″; G1 1/2″, NPT1 1/2″ -
Max. measurement distance
Standard: 8 m (26.2 ft)
With flooding protection tube: 12 m (39.4 ft) -
Communication
Bluetooth® wireless technology
-
Certificates / Approvals
CSA C/US
-
Options
Flooding protection tube
Different mounting possibilities -
Application limits
DK < 4:
FMR5x;
Turbulent surfaces:
FMR5x;
Ammoniacal gas phase:
FMR54 in stilling well;
Strong build-up formation:
FMR54 with air purge;
Only PTFE resistant:
FMR52;
Custody transfer measurement:
FMR5xx or NMR8x
Field of application
Micropilot FMR10 offers continuous non-contact level measurement and is a perfect application fit for the water & wastewater industry and utilities across all industries. FMR10 belongs to the first radars with Bluetooth® commissioning, operation and maintenance app. Signal curves can be shown via app on every Bluetooth®-enabled smartphone or tablet (iOS, Android). With the compact design, thanks to unique chip, the device is ideal for limited space applications.
Radar for continuous level measurement in liquids. For use in storage tanks, open basins, pump/lift stations or sewer management.Process connections: ThreadsProcess temperature: -40 to +60°C (-40 to +140°F)Process pressure: -1 to +3bar (-14.5 to +43psi)Maximum measuring range: up to 12m (39ft) with mounted flooding tube protectionAccuracy: ±5mm (0.2″)Measuring frequency: 26GHz
Benefits
Non-contact radar with Bluetooth® commissioning, operation and maintenance app Most compact radar due to unique radar chip design offering perfect fit in limited space applications Best price-performance-ratio radar Perfect application fit for water & wastewater and utilities in all industries (IP66, IP68 / NEMA4x /6P)Full PVDF body to resist outdoor conditions, sealed wiring and fully potted electronics eliminates water ingress and allows operation under harsh environmental conditions Easy setup with three main parameters suits for most applications Simple, safe and secure wireless remote access via Bluetooth®